Insight Energy Ventures Dba Powerley 031707 DBA Powerley Installation Guide
- June 6, 2024
- Insight Energy Ventures Dba Powerley
Table of Contents
Let’s get this
party started.
Powerlync Plug Setup Guide
Your Powerlync Plug
Welcome!
Here you’ll find everything you need to know to get started with your new Powerlync Plug.
Powerline Plug Setup
-
Find the perfect spot
• Unpack the Powerlync Plug
• Find a location less than 30 ft away from your home’s meter
• Plug it into the wall -
Launch Powerlync Plug Setup
Once your Powerlync Plug is plugged in, launch the app on your mobile device to begin the Powerlync Plug Setup. Follow the in-app instructions to complete the setup process.
Exploring the app
Stay connected in real-time
Use your real-time energy consumption on the dial to understand how your home
uses energy at different times.
Get to know your home
Identify your high-usage appliances by turning devices off and tracking your
spikes on the dial.
Have peace of mind
Forget if you left an appliance on after leaving the house? Check the dial to
see if your energ usage looks normal for your home.
Know what to expect on your bill
Set a monthly budget and track your energy usage to stay on top of your bill.
Note: This is an early test of the Powerlync Plug. New functionality in the app will be released as time progresses.
Additional information
Technical Specifications
- Outlet requirement is 120VAC, 50/60 HZ source only
- Connected device to plug can not exceed the 15A limit
- Pending Certifications: Zigbee, Wifi, ETL, FCC, Apple HomeKit
- Operating Temp: 0C to 40C degree
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution: The user is cautioned that changes or modifications not
expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator and any part of your body.
FCC Supplier’s Declaration of Conformity
- Product Name: Powerlync Plug
- Model Number: PWLY-278383-A1
- FCC Compliance Statement
- Applicable standards: FCC CFR 47 Part 15 Subpart B
This device complies with related rules, operation is subject to the following
two conditions.
(1) This device may not cause harmful interference and, (2) This device must
accept any interference received, including interference that may cause
undesired operation.
Responsible Party – U.S. Contact Informaiton
Insight Energy Ventures LLC. dba “Powerley”
218 West 6th Street
Royal Oak MI 48067
www.powerley.com
IC Statement
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science, and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference; and (2) This device must accept
any interference, including interference that may cause undesired operation of
the device.
This equipment complies with IC RSS-102 radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed and
operated with a minimum distance of 20cm between the radiator and any part of
your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>