venta AS100 Air Sense Eco Room Air Quality Sensor Instruction Manual

venta AS100 Air Sense Eco Room Air Quality Sensor

Thank you!
We are convinced that this VENTA model will exceed your expectations and wish you joy while using it.
Please register your VENTA device: www.venta-air.com
USA

Dear customer

Thank you for purchasing the AirSense, in doing so you have acquired an indoor climate and air quality measuring device that measures, monitors and analyses the air components, the indoor atmosphere and environmental influences.
It is an important data transmitter and a modern and intelligent smart home device for con-trolling VENTA AirConnect compatible devices – for healthier living Made in Germany.

Symbols used in this document

SAFETY INSTRUCTIONS

Please read these operating instructions carefully before starting up and keep them for further reference. The current version of the operating instructions is available on www.venta-air.com.

• This device is intended for indoor air analysis in domestic use only.
• This device is not intended for use by persons (including children) with reduced bodily or mental capabilities, or a lack of experience and knowledge unless they are supervised by a person responsible for their safety or instructed in the use of the device.
• Children should be supervised to ensure that they do not play with the appliance.
• Do not look directly into the illuminated light strip for extended periods of time.
• This device may only be installed and used in the manner described in the operating instructions.
• Do not expose the device to extreme temperatures, direct sunlight, extreme humidity or moisture.
• Do not subject the device to shocks or strong vibrations.
• The device housing may only be opened by skilled personnel (manufacturer).
• Clean the device with a cloth only. Do not use abrasive cleaners or cleaning agents containing sol-vents.
• Do not use/touch the device with wet hands.
• The device must not be used in explosive, aggressive or extremely dusty atmospheres.
• The device must not be used out-doors, near swimming pools or in wet terrain.

Declaration of Conformity

VENTA hereby declares that the mod-els AS100 and AS150 for retrieving air quality data comply with Directive 2014/53/EU. The complete text of the EU Declaration of Conformity is avail-able at the following internet address: www.venta-air.com

Warranty

Due to the high quality of the device, VENTA-Luftwäscher GmbH guaran-tees that this product will be free from defects for a period of two years from the date of purchase, provided that it is used properly. If a material or processing defect does occur, please contact the VENTA service team or your retailer. In addition, VENTA’s general warranty conditions apply: www.venta- air.com

Scope of delivery/description

• 1x Short Introduction
• 1x Safety instructions

1. AirSense AS100 / AS150 2 Light strip
2. Micro USB connector
3. USB cable
4. Power adapter
5. Power adapter plug

Country-specific scope of supply:

• Europe: a
• Korea: b
• USA /Japan: c
• China: d
• United Kingdom: d
• Malaysia: a, e
• Global: a, b, c, d, e

Installation

AirSense can be freestanding or mounted on wall brackets indoors. Select an installation location without pipes or cables behind it. Place screws as shown in the figure.
Suspend the device on the screw heads us-ing the openings provided in the back.

Power plug

1. Plug the appropriate power supply plug for your region into the power supply. The AirSense AS100 and AS150 models must be connected to a permanent power source to operate.
2. Plug the assembled power plug into a suitable power outlet and connect the USB cable to the USB port of the power plug.
3. Connect the USB cable to the micro USB  connector on the device.
4. Initialization (startup): A blue chase light crosses the light strips once only from one side of the device to the other in parallel at the top and bottom.

Hotspot mode

During initial startup, the device is automatically in hotspot mode after initialization (startup) and is ready for network setup: the LED strip flashes blue continuously on both sides.

Activating WiFi

Make sure your smartphone or tablet is connected to your home WiFi network.

Downloading and installing the VENTA Home App

The VENTA Home App lets you operate all of your VENTA devices that have a WiFi function easily via your smartphone.
This gives you a clear display of all measured values for each room at a glance. You can immediately see when a critical value is reached in a room and action is required. In the event of critical values, the VENTA Home App provides support with recommendations for action as well as information on possible causes. Detailed measured value analyses can be created for all measured values; this can help you draw conclusions on changes in values due to everyday activities.

Setting up WiFi

After you have downloaded and installed the VENTA Home App, please open the app and follow the instructions on the screen of your smartphone or tablet.

Please make sure that

• You use a 2.4 GHz or a mixed 2.4/5 GHz net-work, because the WiFi module in the device does not support 5 GHz networks.
• Your router supports 802.11b/g/n.
• The iOS operating system version 13.0 or newer, or Android version 8.0 or newer is installed.
  If necessary, update the operating system of your smartphone or tablet.

For more information please visit:www.venta-air.com/en_gb/Service/Venta-Home- App/

Displaying the sensor values
Two chaser lights which regularly move slowly around the entire device indicate the current quality of the measured values. The colour values gradually merge to reflect the measured values:

1. Green: The sensor values are good
2. Yellow: As soon as a value deteriorates, the colour of the chaser lights gradually changes from green to yellow: at least one sensor value is below average.
3. Red: As soon as a value drops below a mediocre quality level, the colour of the chaser lights gradually changes to red: at least one sensor value is poor.
   For more information on the individual sensors and the values they measure, please refer to the app on your tablet or smartphone.

Displaying the sensor values

The values measured by the individual sensors can be accessed via the VENTA Home App on your smartphone or tablet:

AS100| AS150|
---|---|---
 | X| CO 2| Carbon dioxide
X| X| VOC| Volatile organic compounds
 | X| HCHO| Formaldehyde
X| X| RH| Air humidity
X| X| T| Temperature
 | X X

X

| PM 1.0

PM 2.5

PM 10

| Particulate matter

Restarting

Press and hold the Reset button on the back of the device for approx. 5 seconds until the LED strip shows orange:
The device has now been reset to the factory settings and is in hotspot mode (see section Hotspot mode).
Note: Each time the device is restarted, the locally stored data is deleted.

Firmware update

Two blue chaser lights run from the micro USB connector along the LED strip to the other side of the device. When updates are available, firmware updates take place automatically

Error messages

The light strip flashes purple on the short sides at the same time:
It is not possible to connect to the WiFi network.

The left short side lights up continuously in red-violet, the right short side flashes, also in red-violet:
No connection to the VENTA cloud can be established.

Technical specifications

8.15 x 3.3 x 1.1 in

| 207 x 84 x 28 mm

8.15 x 3.3 x 1.1 in

Weight without power supply unit + cable Weight with power supply unit + cable

Weight with power supply unit + cable (global)

| 248 g / 8.75 oz

334 g / 11.75 oz

381 g / 13.65 oz

| 283 g / 10 oz

369 g / 13 oz

416 g / 14.9 oz

Power consumption| 3.5 W| 3.5 W
USB pluggable power adapter| Input: 100-240 V ~, 50/60 Hz, max. 0.3 A Output: 5 V = 1.0 A (5.0 W),

Model ADS-6RC-06 05050E

Protection class II

Disposal

The symbol with the crossed out dustbin indicates the requirement to dispose of electrical and electronic appliances separately (WEEE). Such devices can contain hazardous substances that are harmful to the environment. These devices must be re-turned to a designated collection point for the recycling of WEEE and must not be disposed of as unsorted domestic waste. In this way, you can help to conserve resources and protect the environment. For further information, please consult your local authority.

Data protection
Your data will be treated confidentially by VENTA Luftwäscher GmbH. For more information on privacy, please see our privacy policy on: www.venta- air.com
The packaging material is recyclable. Please dispose of the packaging in an environmentally friendly manner and take it to a collection point for recyclable materials.
Children must not play with plastic bags and packaging material, due to the risk of injury and suffocation. Store such material safely or dispose of it in an environmentally friendly way.

SERVICE AND SUPPORT

GERMANY
VENTA-Luftwäscher GmbH Weltestraße 5
88250 Weingarten
Tel.: +49 751 50 08 0
Fax: +49 751 50 08 20 [email protected] www .venta-air.com

BENELUX
VENTA Benelux B.V.
Van Heemstraweg Oost 8 5301 KE Zaltbommel Niederlande
Tel.: +31 4 18 54 13 43 [email protected] www.venta-air.com

SWITZERLAND
VENTA-Luftwäscher AG Bösch 65
6331 Hünenberg
Schweiz
Tel.: +41 41 781 15 15 Fax: +41 41 781 15 50 [email protected] www.venta-air.com

USA
VENTA Air Technologies Inc. US Headquarters
1111 North Plaza Drive, Suite 715
Schaumburg, IL 60173 United States of America Tel.: +1-888-333-8218 Fax: +1-224-567-8349 info-us@venta- air.com www.venta-air.com

AUSTRIA
Stromayer Elektro Service GmbH Strohmayergasse 8 1060 Wien
Österreich
Tel.: +43 1 5961706 [email protected]
CHILE
VENTA Air Technologies Inc. US Headquarters
1111 North Plaza Drive, Suite 715
Schaumburg, IL 60173 United States of America Tel.: +1-888-333-8218 Fax: +1-224-567-8349 info@venta- usa.com www.venta-air.com
CZECH REPUBLIC LetMeRepair GmbH Fichtestrasse 1a
02625 Bautzen
[email protected] www.letmerepair.com

FINLAND
Suomen Allergiakauppa Länsiportintie 14
13430 HÄMEENLINNA Finnland
Tel.: +358400855000 [email protected] www.allergiakauppa.fi

FRANCE
LetMeRepair GmbH Fichtestrasse 1a
02625 Bautzen
[email protected] www.letmerepair.com

HUNGARY
LetMeRepair GmbH Fichtestrasse 1a
02625 Bautzen
[email protected] www.letmerepair.com

ITALY
LetMeRepair GmbH Fichtestrasse 1a
02625 Bautzen
[email protected] www.letmerepair.com

JAPAN
Address Service Co., Ltd. 17-9, Shinoda, Togane-shi, Chiba, 283-0013 Japan Tel.: +81-120-407-554 [email protected]
LATVIA / LITHUANIA SIA „BALTIJAS TIRDZNIECĪBAS UZŅĒMUMS”
Dārzaugļu iela 1-201, Riga LV-1012, Latvia Tel.: +371 67790720 [email protected]

RUSSIA
VENTA Russia TSK IMPORT (offizieller Importeur) 124683, Moskau, Selenograd, 1505, Raum III
Russland
Tel.: +7 499 733 10 10
Fax: +7 499 733 10 10 [email protected]
SCOTLAND, UK LetMeRepair UK Ltd
1 Langlands Court
Kelvin South Business Park, East Kilbride, G75 0YB, Scotland, UK
Tel.: +44 (0) 1355 241 222 [email protected] Fax: +44 1355 246575

SLOVAKIA
LetMeRepair GmbH Fichtestrasse 1a
02625 Bautzen
[email protected] www.letmerepair.com

SPAIN
LetMeRepair GmbH Fichtestrasse 1a
02625 Bautzen
[email protected] www.letmerepair.com
SOUTH AFRICA EUROCARE Wellness
5 Star Business Park, Unit 2, Persimmon Close, Honeydew, Johannesburg Südafrika
Tel.: +27 11 888 3255 Fax: +27 11 888 9874 [email protected]

SOUTH KOREA
VENTA KOREA CO., LTD. 3/F., Seojin Bldg., 754, Seolleung-ro,
Gangnam-Gu,
Seoul 135-948, Korea Tel.: +82 22 03 40 114 Fax: +82 22 03 40 119

UKRAINE
VENTA-Centre Ukrein Schlichtera, 11
Kharkov, Ukraine
Tel.: +38 057 752 72 72 Fax: +38 057 768 01 57 [email protected]

SERVICE AND SUPPORT
www.venta-air.com/Service/Service-Support/

VENTA WORLD WIDE
www.venta-air.com/en_de/Venta-worldwide/

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>