venta AS100 AirSense ECO PRO Instructions

Operating instruction

VENTA AirSense ECO / PRO
AS100 / AS15

Thank you!
We are convinced that this VENTA model will exceed your expectations and wish you joy while using it

Please register your VENTA device: www.venta-air.com

USAhttps://www.venta-air.com/en_us/service/product-registration

Dear customer,
Thank you for purchasing the AirSense, in doing so you have acquired an indoor climate and air quality measuring device that measures, monitors and  analyses the air components, the indoor atmosphere and environmental influences.
It is an important data transmitter and a modern and intelligent smart home device for controlling VENTA AirConnect compatible devices – for healthier living Made in Germany

Symbols used in this document

| Caution: Risk to health and the product
---|---
| Do not use outdoors or in damp environments.
| The device has a removable power supply
| This device complies with protection class II

SAFETY INSTRUCTIONS

Please read these operating instructions carefully before starting up and keep them for further reference. The current version of the operating instructions is  available on www.ventaair.com

• This device is intended for indoor air analysis in domestic use only.
• This device is not intended for use by persons (including children) with reduced bodily or mental capabilities, or a lack of experience and knowledge, unless they are supervised by a person responsible for their safety or instructed in the use of the device.
• Children should be supervised to ensure that they do not play with the appliance.
• Do not look directly into the illuminated light strip for extended periods of time.
• This device may only be installed and used in the manner described in the operating instructions.
• Do not expose the device to extreme temperatures, direct sunlight, extreme humidity or moisture.
• Do not subject the device to shocks or strong vibrations.
• The device housing may only be opened by skilled personnel (manu- facturer)
• Clean the device with a cloth only. Do not use abrasive cleaners or cleaning agents containing solvents.
• Do not use/touch the device with wet hands.
• The device must not be used in explosive, aggressive or extremely dusty atmospheres.
• The device must not be used outdoors, near swimming pools or in wet terrain

Declaration of Conformity
VENTA hereby declares that the models AS100 and AS150 for retrieving air quality data comply with Directive 2014/53/EU. The complete text of the  EU Declaration of Conformity is available at the following internet address: www .venta-air.com

Warranty
Due to the high quality of the device, VENTA-Luftwäscher GmbH guarantees that this product will be free from defects for a period of two years from the date of purchase, provided that it is used properly. If a material or processing defect does occur, please contact the VENTA service team or your retailer. In addition, VENTA’s general warranty conditions apply: www.venta- air.com

Scope of delivery/description

1x Short Introduction
1x Safety instructions

1. AirSense AS100 / AS150
2. Light strip
3. Micro USB connector
4. USB cable
5. Power adapter
6. Power adapter plug

• Country-specific scope of supply:

Europe:
Korea:
USA /Japan:
China:
United Kingdom:
Malaysia:
Global:| a
b
c
d
e
a, e
a, b, c, d, e
---|---

Installation

AirSense can be freestanding or mounted on wall brackets indoors
Select an instillation location without pipes or cables behind it. Place screws as shown in the figure.
Suspend the device on the screw heads using the openings provided in the back

Power plug

1. Plug the appropriate power supply plug for your region into the power supply. The AirSense AS100 and AS150 models must be connected to a  permanent power source to operate.
2. Plug the assembled power plug into a suitable power outlet and connect the USB cable to the USB port of the power plug.
3. Connect the USB cable to the micro USB connector on the device.
4. Initialization (startup): A blue chase light crosses the light strips once only from one side of the device to the other in parallel at the top and bottom.

Hotspot mode

During initial startup, the device is automatically in hotspot mode after initialization (startup) and is ready for network setup: the LED strip flashes blue  continuously on both sides.

Activating WiFi
Make sure your smartphone or tablet is connected to your home WiFi network.

| |
---|---|---
https://apps.apple.com/de/app/venta- home/id1572235304| https://play.google.com/store/apps/details?id=com.venta.home.mobile.droid| https://www.venta-ir.cn/support/venta-home-app/

Downloading and installing the VENTA Home App

The VENTA Home App lets you operate all of your VENTA devices that have a WiFi function easily via your smartphone. This gives you a clear display of all measured values for each room at a glance. You can immediately see when a critical value is reached in a room and action is required. In the event of critical values, the VENTA Home App provides support with recommendations for action as well as information on possible causes. Detailed measured value analyses can be created for all measured values; this can help you draw conclusions on changes in values due to everyday activities.

Setting up WiFi
After you have downloaded and installed the VENTA Home App, please open the app and follow the instructions on the screen of your smartphone or tablet.

For more information please visit:
www.venta-air.com/en_gb/Service/Venta-Home-App/

Please make sure that…

• You use a 2.4 GHz or a mixed 2.4/5 GHz network, because the WiFi module in the device does not support 5 GHz  networks.
• Your router supports 802.11b/g/n.
• The iOS operating system version 13.0 or newer, or Android version 8.0 or newer is installed.

If necessary, update the operating system of your smartphone or tablet.

Displaying the sensor values

Two chaser lights which regularly move slowly around the entire device indicate the current quality of the measured values. The colour values gradually  merge to reflect the measured values:

1. Green: The sensor values are good:
2. Yellow: As soon as a value deteriorates, the colour of the chaser lights gradually changes from green to yellow: at least one sensor value is below verage.
3. Red: As soon as a value drops below a mediocre quality level, the colour of the chaser lights gradually changes to red: at least one sensor value is poor. For more information on the individual sensors and the values they measure, please refer to the app on your tablet or smartphone.

Displaying the sensor values
The values measured by the individual sensors can be accessed via the VENTA Home App on your smartphone or tablet:

AS100| AS150| |
---|---|---|---
| X| CO2| Carbon dioxide
X| X| VOC| Volatile organic compounds
| X| HCHO| Formaldehyde
X| X| RH| Air humidity
X| X| T| Temperature
| X| PM 1.0| Particulate matter
| X| PM 2.5|
| X| PM 10|

Restarting

Press and hold the Reset button on the back of the device for approx. 5 seconds until the LED strip shows orange:
The device has now been reset to the factory settings and is in hotspot mode (see section Hotspot mode).
Note: Each time the device is restarted, the locally stored data is deleted.

Restarting
Press and hold the Reset button on the back of the device for approx. 5 seconds until the LED strip shows orange:
The device has now been reset to the factory settings and is in hotspot mode (see section Hotspot mode).
Note: Each time the device is restarted, the locally stored data is deleted.

Firmware update
Two blue chaser lights run from the micro USB connector along the LED strip to the other side of the device. When updates are available, firmware updates take place automatically.

Error messages
The light strip flashes purple on the short sides at the same time:
It is not possible to connect to the WiFi network.

The left short side lights up continuously in red-violet, the right short side flashes, also in red-violet:
No connection to the VENTA cloud can be established.

Technical specifications

Frequency range
Max. transmitter power
WiFi Standard
Dimensions (LxWxH)

Weight without power supply unit + cable
Weight with power supply unit + cable
Weight with power supply unit + cable (global)
Power consumption
USB pluggable power adapter

2.4 GHz
20 dBm
IEEE 802.11 b/g/n
207 x 84 x 28 mm
8.15 x 3.3 x 1.1 in
248 g / 8.75 oz
334 g / 11.75 oz
381 g / 13.65 oz
3.5 W| 2.4 GHz
20 dBm
IEEE 802.11 b/g/n
207 x 84 x 28 mm
8.15 x 3.3 x 1.1 in
283 g / 10 oz
369 g / 13 oz
416 g / 14.9 oz
3.5 W

Input: 100-240 V ~, 50/60 Hz, max. 0.3 A
Output: 5 V = 1.0 A (5.0 W),
Model ADS-6RC-06 05050E
Protection class II
Subject to changes and errors.

Disposal
The symbol with the crossed out dustbin indicates the requirement to dispose of electrical and electronic appliances separately (WEEE). Such devices ****can contain hazardous substances that are harmful to the environment. These devices must be re- turned to a designated collection point for the recycling of WEEE and must not be disposed of as unsorted domestic waste. In this way, you can help to conserve resources and protect the environment. For further information, please consult your local authority.

Data protection
Your data will be treated confidentially by VENTA Luftwäscher GmbH. For more information on privacy, please see our  privacy policy on:
www.venta-air.com

References

• Venta Ihr Raumluftexperte für gesündere Raumluft
• Venta Ihr Raumluftexperte für gesündere Raumluft
• Venta Home App - for your Venta Device with Wifi
• Venta Home App – Pour appareil Venta avec Wi-Fi
• Venta Home App – Voor uw Venta-apparaat met wifi-functie
• Venta Home App - Für Ihr Venta Gerät mit WiFi

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>