SOUNDFREAQ SFQ-08B Wireless Bluetooth Speaker User Guide

June 6, 2024
SOUNDFREAQ

SOUNDFREAQ SFQ-08B Wireless Bluetooth Speaker User Guide

SOUN DFREAQ®

Using the Alarm

Setting Alarm Time

  1. Press the ALARM SET button, the default alarm time of 6 :OOam will be shown.

  2. Turn the rotary SET knob to the desired alann time.

  3. Press down the rotary SET knob to con/inn.

  4. The alarm will be DN for the next day and the ALARM DN icon ‘{@}’ will be shown.

  5. Press ALARM DN/DFF button to toggle alann DN or DFF.

Using Snooze and Shutting off the alarm

  1. If you prefer to get some more sleep after the alann goes off, press the SNDDZE button and the alann will go off. The Z z icon will be shown on the display. The default snooze time is 10 minutes and will repeat 12 times.

  2. To cancel the snoozing or shut off alann pennanently after the alann goes off, press the ALARM DN/DFF button once. The ALARM DN icon@ will disappear.

  3. To wake you up for the next day, press the ALARM DN/DFF button to switch on the alarm.The ALARM DN icon @ will be shown.

SB Ch

  1. There are 3 smart USB charging ports on the Sound Rise II. Simply connect your device to the USB ports for charging.

Setting Screen Brig

  1. Press the DIMMER button repeatedly to change the screen brightness.

  2. When the screen brightness is DFF, press any button to momentarily turn the display on to see the time to operate any functions.

  3. When the alarm goes off and the screen brightness is off, the display will automatically tum on. If SNDDZE is pressed, the display will tum off again until the alarm goes off again.

Listening to the Radio

  1. Press the STANDBY button to turn on the Sound Rise II. Se 81

  2. Press the SDURCE button repeatedly until the FM icon IE!il appears on the display.

  3. Press and hold the << / >> buttons for 2 seconds to  search a desired station for listening.

  4. You can also turn the rotary SET knob to tune into your desired station for listening.

  5. Press the CH button to show the frequency of the current station.

Programming and Recalling Radio Presets

There are 10 radio presets to save your favorite FM stations. To save a preset:

  1. Tune to your preferred radio station.

  2. Press the PRESET button. The present number “P: 01” will displays.

  3. Press the << I >> buttons to change preset number.

  4. Press the PRESET button again to save the current station to the preset number selected.

  5. To recall the preset station to listen, press the PLAY button to toggle through the preset stations.

Safety Information

The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNINGS:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
DO NOT REMOVE COVER or OPEN THE CABINET. Dangerous high voltages are present inside the enclosure. No user serviceable parts inside. Leave all servicing to qualified service personnel.

IMPORTANT SAFETY INSTRUCTIONS 1.

  1. Read these instructions.
  2. Keep these Instructions.
  3. Heed all Warnings.
  4. Follow all instructions.
  5. Do not use this apparatus near water.
  6. Clean only with dry cloth.
  7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
  8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
  9. Do not defeat the safety purpose of the polarized or grounding -type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
  10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
  11. Only use attachments/accessories specified by the manufacturer.
  12. Use only with the cart, stand, tripod, bracket or table specified by the manufacturer, or sold with the apparatus.
  13. Unplug this apparatus during lightning storms or when unused for long periods of time.
  14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
  15. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, shall not be placed on the apparatus.
  16. The mains plug is used as disconnect device and it shall remain readily operable during intended use. In order to disconnect the mains plug from the mains completely, the mains plug should be disconnected from the mains socket outlet completely.
  17. Do not place any naked flame sources, such as lighted candles, on the apparatus.

For compatibility between the unit and another device with Bluetooth technology, consult the device’s documentation and dealer. In some countries, there may be restrictions on using Bluetooth devices. Check with your local authorities. 0 Bluetooth’ is a registered trademark of Bluetooth SIG, Inc WARNING! Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Please read rating label at the bottom of system for power input and other safety information.

FCC and IC Information:

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s) and Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device. Canada IC statments Cet

FCC&IC Radiation Exposure Statement

This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the device and receiver.
  • Connect the device into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Information for Users on Disposal of Old Equipment [European Union]

This symbol indicates that the electrical and electronic equipment should not be disposed as general household waste at its end-of-life. Instead, the product should be handed over to the applicable collection point for the recycling in accordance with your national legislation.

By disposing of this product correctly, you will help to conserve natural resources and will help prevent potential negative effects on the environment and human health that could otherwise be caused by inappropriate waste handling of this product. For more information about collection point and recycling of this product, please contact your local municipal office, your household waste disposal service or the shop where you purchased the product. Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.

[Other Countries outside the European Union)
If you wish to dispose of this product, please do so in accordance with applicable national legislation or other rules in your country for the treatment of old electrical and electronic equipment.

CAUTION – Proper Installation

  • Install the system in a place which is level, dry and neither too hot nor too cold. The appropriate temperature is between 5 ‘C and 35 ‘C.
  • Install the system in a location with adequate ventilation to prevent internal heat from building up inside the unit.
  • leave sufficient distance between the system and TV.
  • Keep the system away from TV to avoid interference wtth TV.

CAUTION – Proper Ventilation

To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows:

Front: No obstructions and open spacing. Sides /Top/ Back:No obstructions should be placed in the areas shown by the dimensions.
Bottom: Place on the level surface. Maintain an adequate air path for ventilation by placing on a stand with a height of 10 cm (3-15/16″) or more.

Front View:

Side View:

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals