eSenLite B095957Z1Z 2.4G Wireless Dimming and CCT Tunable LED Panel Instruction Manual
- June 6, 2024
- eSenLite
Table of Contents
eSenLite B095957Z1Z 2.4G Wireless Dimming and CCT Tunable LED Panel
Recessed Mount ****
- Prior to installation, make sure the drop ceiling frame can support the weight of the LED panel. Then connect the LED Panel Light to power to verify it operates. Plan to rotate the panel into a vertical diagonal position for installation into the drop ceiling frame.
- Firmly secure the LED Panel Light’s Internal Power Driver in place and insert the LED Panel Light above the drop ceiling. be sure the front of the panel is facing the ground.
- Rotate the LED Panel Light (45° in the horizontal direction) to align the edge of the LED Panel Light to the drop ceiling frame.
- Rotate the LED Panel Light (90° in the vertical direction) to align it with the recessed drop ceiling frame and to align the LED Panel Light radiating face towards the ground.
- Embed the LED Panel Light into ceiling and adjust its position to align as flat as surrounding ceiling tiles.
- Turn power ON and verify operation. Installation complete.
Suspension Mount
- Setup the suspension wire connector and holder on the ceiling, make sure been safe!
- Connect the suspension steel wire on the ceiling completely and safely
- Hanger the LED panel light by the hook of suspension steel wire
We appreciate your business!
How’d we do?
Please take a moment to let us know. We will provide a FREE wall mount remote
controller (mode # EEFPTL-RC-W) if you can register on our website:
www.eleding.com and leave us your positive feedback at Home Depot.com. Please
contact us via sales@eesgi.com to get the FREE remote! We use your feedback to
improve our operations for you and customers like you. Thanks!
Surface Mount
- Parts A1,A2, B1,B2;
- First must be assembled well A1, A2, and B1 (as illustrated)
- As is shown in the figure A1 and A2 mount it with #8 screws with nylon swelling cap on the ceiling or on the wall, and then siding insert the panel light directly into the aluminum frame
- Cover B2, to finish installation.
Option 1: Apply with RF wireless dimming CCT control All-In-One function
(Default and recommended)
- Dimming and Color adjusted via RF Remote Control
Product description
For the following two series of products:
- EEBPTL2450W-RC
- EEBPTL2235W-RC
- EEBPTL1435W-RC
Product Introduction
The ultra slim LED panels illuminate over their complete surface brightly and highly consistent in white or warm white (according to CCT version). They are outstandingly suited for most standard drop ceilings, also can be used as elegant interior design elements directly on surfacing walls or hangering ceilings. Based on this panel illuminating tech, it will not produce much heat and lower the cooling than average LED lights.The consistently illuminated surface almost has no glare, shadows and has a highly modern appearance. The use of efficient, long-life and high quality LEDs means that user will save outstanding electricity bill and a lot maintenance labor cost in long run.
Product Features
Long life
Its service life is significantly longer than fluorescent lamps or other old
dated light sources.
Ecological
Saves electricity and low carbon.
Saves energy
Consumes less energy via use of efficient LEDs.
The Light quality
Very uniform light distribution in the complete surface.
Elegant
Modern ultra thin design, healthy light, no UV component and almost no
glare.
Applications
The most common places you are likely to find the panel lights include：Hospitals, Laboratory, Clinics, Schools/classrooms, Conference Rooms, Offices, Restaurants, Working Stations and etc.
Attention
- Do not allow to use scouring powder, abrasive powder, oil and acid alkaline type detergent.
- Do not spray air fresheners, disinfectant, cleaning organic solvents directly on light-emitting surface.
- Do not allow wire connectors to have contact with water.
- Do not allow sharp objects to scratch the lamp,especially the light-emitting surface.
- Consult a qualified electric tach or contractor to ensure work on right.
THE HANDHELD REMOTE CONTROL
Power OFF the LED Panel Light and then power it ON. The last saved brightness (which is saved by the button “SAVE”) and the last saved color temperature (which is saved by the button “SAVE” or “OFF”) will be displayed by default. The defau factory setting of the light is 100% brightness and 4000K.
THE WALL TYPE REMOTE CONTROLLER
The matching method of hand-hold remote controller and wall-type remote controller, the wall controller can copy some of the functions of the hand- hold controller by the following method.
NO
|
Grouping
|
Hand-hold controller
|
Wall-type controller
---|---|---|---
1
|
1
|
1 + ID
| ON+CCT
2
|
2
|
2 + ID
|
ON+CCT
3
|
3
|
3 + ID
| ON+CCT
4| 4| 4 + ID| ON+CCT
5| ALL| ID| ON+CCT
After 10s of each operation the controller will enter standby power saving mode. If you need to make adjustments, simply press the “ON” button, the indicator will flash to show it is working. (If the controller is under working mode, the indicator will flash no matter which button is pressed). Power the light off then power it on, the last saved brightness (which is saved by the button “ON”) and the last saved color temperature (which is saved by the button “ON” or “OFF”) will be displayed by default. The defaulted factory setting of the light is 100% brightness and 4000K.
EE Systems Group Inc. www.eleding.com , info@eesgi.com. 1-877-579-3889 (M-F, 10am-5pm PST), v042021
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>