baseaire AirWerx Dehumidifier Installation Guide
- June 6, 2024
- BaseAire
Table of Contents
baseaire AirWerx Dehumidifier
Installation Guide
Step process:
- Softly Poke these 2 Slots with a Flat blade screwdriver or the flat thins, then open it.
- Push the nail in, securing the switch box.
- Putting the wire through the hole.
- Fix it on switch box with 2 screws. Thread the wire through the hole.
- Inserting Cats cable to control board, a clicking sound indicates the successful connection.
- Installing the control board to switch box.
Connection
Connecting to Unit. Then it can be controlled remotely.
Instructions
-
On/Off (Power) Button
Press the on/off button and the machine will start running (two beeps). Press the button again to turn the machine off. -
Up Button/Down Button
Use the Up ar>d Down arrow buttons lo adjust the humidity level. -
Mode M
Use the Mode button to switch between dehumidification and an auction application.- The symbol on the display board indicates the sensor on the remote control is being utilized
The symbol on the display board indicates the sensor on the dehumidifier is being utilized.
- The symbol on the display board indicates the sensor on the remote control is being utilized
-
Temperature T
Press the temperature button to display the current temperature on the screen. Press the button again to tum off the display. -
Continuous C
Press this button to switch the unit into continuous mode. will appear on the display 10 indicate continuous mode. -
Drain Pump p
Use this button if the unit will not be in use for an extended period of time. Pressing the drain pump button will remove waler from the pump reservoir. so the unit can be safely moved or stored.
Remote Controller Instructions
- AirWerx Dehumidifiers can be controlled using an optional remote accessory.
- The AirWerx Remote Control connects to your AirWerx Series Dehumidifier via a 25′ CAT 5 cable. The remote control contains an integrated sensor that gives you multiple options for remotely controlling your unit, in addition to monitoring the conditions surrounding the dehumidifier.
- One application for the remote control is to install the dehumidifier in one room with the conditioned air ducted into a second room that contains the remote. For example, the dehumidifier could be installed in a laundry room and ducked into a living room. The remote would then be mounted in the living room so the remote sensor can control the humidity and provide easy controls for the user.
- Another useful application for the remote control is if the dehumidifier is in an area that’s difficult to access on a regular basis. For instance, if your dehumidifier is installed in your crawl space, the remote could be mounted in your living space or garage. This provides you with an easy way to monitor the dehumidifier.