V-TAC 8602 LED Table Lamp With Wireless Charger Instruction Manual

V-TAC 8602 LED Table Lamp With Wireless ChargerLED TABLE LAMP WITH WIRELESS CHARGER

TECHNICAL DATA

5V, 1A (5W)

ON/OFF CYCLE| >10,000
OPERATION TEMPERATURE|

-20° ~+45°

TIME TO REACH THE BRIGHTNESS|

2S

INTRODUCTION & WARRANTY

Thank you for selecting and buying V-TAC Wireless Charger device. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any other query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. This product is warranted for manufacturing defects only.
Wireless charging desk lamp is an intelligent product. Designed with LED source which is the most advanced lighting-tech with uniform and soft, high efficiency and CRI, advanced constant current and flicker -free to protect your eyes. With 135’ rotating head and 90’ arm, the lamp is able to reach almost every position you can imagine. Also, it has built-in wireless charger which compatible with any Qi-Standard phones and devices. It is integrated with USB output function which makes charging much easier

WARNING:

1. Please make sure to turn off the power before starting the installation
2. The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.

This marking indicates that this product should not be disposed of with other household wastes.

PACKAGE CONTENTS

PARTS INDICATOR

OPERATION GUIDE

1. Put the micro USB port into the power input of the desk lamp
2. Refer to the functions of each button in previous page (Outline) to use the lamp. Short press is required to adjust the functions except that brightness increase and decrease need long press.
3. When using the wireless charging function, place phones with Qi receiver onto the wireless charging area. At this time, the wireless charging indicator turns on and flickers to indicate that wireless charging is ON. The indicator turns off after thephone is removed.
4. 4. To charge a digital device, use a piece of charging cable to connect the USB output port of desk lamp with the charging port of the device.

OPERATION CAUTION

1. Please do not put the lamp on high temperature surfaces, and do not use it in flammable or humid environment to avoid the breakdown, short circuit etc.
2. The adapter must be under the specialized range.
3. Place the base of table lamp on steady base while adjusting the arm.
4. The lamp head of the table lamp can be adjusted up to certain angle only. Be careful not to overturn the lamp head beyond the adjusting angle in order to avoid any damage to the lamp.

MAINTENANCE

1. Please clean the lamp once in every two months to keep it smooth and bright.
2. Use cleaning cloth and water to clean the dust
3. For filthy marks, please use cleaning cloth and soapsuds.
4. Please do not clean the lamp by high-volatility and high-corrosive liquid which can lead to discoloring or damaging the lamp.
5. To ensure using effect, please use an DC5V/3A adaptor and good quality cable
6. Among three functions of wireless charging, USB output and desk lamp. Only two functions can be used the same time.
7. Please keep it away from water or other liquid
8. Power off the item before it is cleaned

IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU. FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B

References

• TAC.EU

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>