Shenzhen Hongyuan New Material Technology VH-WB01 Ultraviolet Box Instructions
- June 6, 2024
- Shenzhen Hongyuan New Material Technology
Table of Contents
Wireless Disinfection Box Instructions
Product Name: Ultraviolet box
Product model-WB01
Warm Tips: Please read the instructions carefully before use and keep
them properly.
Note:
- When the sterilization lamp is turned on, please do not look directly at the sterilization lamp tube, otherwise, it will cause slight burns than eyes.
- Please place it at a distance of more than 1M from the computer and electronic equipment to prevent the signal interference of the integrated module.
- Do not open the equipment for repair or modification by yourself or tear the warranty label, which is deemed as man-made damage and is not covered by the warranty.
- The equipment is not waterproof, avoid liquid splash, do not store the product in a wet environment.
- Do not put the product near the heat source or charge near the heat source.
- charging will produce a certain amount of heat, this is a normal phenomenon, will not affect the performance of the product. However, if you feel the cell phone battery or disinfectant box overheating, please disconnect the disinfectant box power supply, cooling, then try to charge.
- warranty period, due to the quality of the product caused by failure or damage, to provide free maintenance services; If the product damage caused by accident, voltage instability, and force majeure factors is not covered by the warranty.
Technical parameters:
- Product model:
- aromatherapy power: 1W
- Wireless charging power: 10W
- disinfection power: LED-2W/ ozone tube -3W
- UV lamp power: 2W
- Number of UV lamp beads: 6
- input voltage/current: 5V/2A 9V/2A
- output voltage/current: 9V/1.1A
- Transmission distance: 2-6mm
- charging efficiency of 80%
- Product size:
- Product weight:
- Charging method: wireless transmission
- charging state indication: standby blue light is always on, charging blue light breathing, full of blue light off, abnormal blue light flash
Mobile phone wireless charging instructions:
-
Connect the wireless charging disinfection box to the power adapter and turn on the power, and the blue indicator light will breathe.
-
To charge a Qi-compatible smartphone, please place the phone on top of the cover.
-
After charging, remove the smartphone from the wireless charging disinfectant box. Instructions:
Short press the disinfection switch button to start the disinfection mode.
Short press the button, the green light is on, indicating that the disinfection mode is in progress, you will hear a “tuk” sound. (can kill Staphylococcus aureus and Escherichia coli up to 99.9%). -
During disinfection, when the cover is opened, the disinfection lamp will be extinguished in order to prevent slight burns to eyes. When the lid is closed, the disinfection procedure will resume.
-
When the disinfection time reaches 5 minutes, you will hear three “beeps” and the indicator light flashes three times and then goes out, indicating that the disinfection is completed.
-
Aromatherapy function instructions:
To add a pleasant aroma to an item, add one drop of liquid aromatherapy to the aromatherapy point in the wireless disinfectant box before disinfection. (Liquid aromatherapy must be
purchased separately) Product features:
- sterilization effect: 99.99%
- The product has a long life and strong durability
- delicate small, easy to carry, and does not occupy a place
- in aviation aluminum industry design, a strong sense of science and technology
- comprehensive disinfection and sterilization, side cross UV disinfection and sterilization, 360-degree cycle without dead Angle.
- can be the player wireless charging function, can be charged in the process of sterilization.
- aromatherapy function.
- large capacity and multi-function can be used to sterilize mobile phones, masks, jewelry watches, etc.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment
Radiation Exposure Statement This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with a minimum distance of 20cm between the
radiator and your body.