aiwa AT-X80Q True Wireless Earphones User Manual
- June 6, 2024
- Aiwa
Table of Contents
aiwa AT-X80Q True Wireless Earphones
Product Overview
Un boxing
- AT-XSOQ Earbuds
- Portable Charging Case
- USB Type-C Charging Cable
- User’s Manual
Please refrain from using any damaged components. Contact your local authorized AIWA distributor/customer service should you need any assistance.
Product Specifications
-
Model Number: AT-XSOQ
-
BT Version: V5.l
-
Rated Power: 4mW
-
Frequency Response: 20-20kHz
-
Impedance: 320 ± 15%
-
Sensitivity: 104dB ± 3dB
-
Supported Profiles: HSP/HFP/A2DP/AVRCP Transmission Distance (Estimated): 10 Meters
(No Obstacles) -
Water resistant: IPX4
-
Battery (Earbuds): 3.7V/2SmAh
-
Battery (Charging Case): 3.7V/200mAh
-
Playback/ Call Time: 4-5 Hours
-
Earbuds Standby Time: 60 Hours
-
Charging Case Standby Time: 70 Days
-
Charging Time (Portable Case): 2.5 Hours
-
Charging Time (Earbuds): 1.5 Hours
-
Earbuds Weight: 3g each
-
Charging Case Weight: 279
The above are estimated values tested in a practical environment and may vary upon individual usage habits. Charging case holds approximately2-3 chargesof earbud’s full battery capacity depending on playback volume.
Product Usage Guide
Manual ON/OFF:
- Power ON: Flip open charging case to power up earbuds. Make sure earphones are fully charged before using them for the first time
- Power OFF: Place earbuds back into charging case and close the lid.
“AT-XBOQ automatically powers off after 3 minutes of disconnection
Music Control:
- Play/Pause: Click touch sensor once (1)
- Next Song Click touch sensor twice {2)
- Previous Song: Click touch sensor thrice (3)
Call Control:
- Answer/Hang Up: Click Lor R side touch sensor once (1)
- Reject Call: Click Lor R side touch sensor twice (2)
Voice Assistant:
Activate Voice Assistant: Long press touch sensor for three (3) seconds
Press multi-function button on the charging case once(l).:
Battery level above 5%: Indicator light will light up in solid green.
Battery level below 5%: Indicator light will flash in green.
Connecting the Product
- Turn on Bluetooth (BT) on your mobile device.
- Turn on Earbuds (Flipping open charging case will power up earbuds).
- Search and connect to “AT-XBOQ” from your mobile device.
Upon opening charging case lid, AT-XSOQ will automatically connect to last paired device.
Troubleshooting
Only one (1) side earbud can be heard/ disconnects/ unable to connect even after successful connection to your device.
Solution: Disconnect both earbuds from mobile device. Place them back
into the charging case and close the lid. Wait for five (SJ seconds then open
the
case to re-attempt connection.
Battery & Charging
Charging Earbuds (Place them back into charging case):
Charging: Green Indicator Light remains lit up
Full Charge:Extinguished Indicator Light
Approximate charging time: 1.5 Hours
Charging the Portable Charging Case
(Plug in USB – C Charging Cable):
Charging: Flashing Orange Indicator Light
Full Charge:Orange Indicator Light remains lit up*
Approximate charging time: 2.5 Hours
Aiwa Electronics lnt’I Co .. Ltd.
Explore more at www.int-aiwa.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>