AEG DLE0970M Cooker Hood User Manual

: June 6, 2024
: AEG

Table of Contents

AEG DLE0970M Cooker Hood
SAFETY INFORMATION
INSTALLATION
DAILY USE
CARE AND CLEANING
Replacing the lamp
ENVIRONMENTAL CONCERNS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

AEG DLE0970M Cooker Hood

FOR PERFECT RESULTS

Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. Visit our website to:

Get usage advice, brochures, troubleshooter, service and repair information: www.aeg.com/support
Register your product for better service: www.registeraeg.com
Buy Accessories, Consumables and Original spare parts for your appliance: www.aeg.com/shop

CUSTOMER CARE AND SERVICE

Always use original spare parts. When contacting our Authorised Service Centre, ensure that you have the following data available: Model, PNC, Serial Number. The information can be found on the rating plate. Warning / Caution- Safety information General information and tips Environmental information

SAFETY INFORMATION

Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.

Children and vulnerable people safety

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children of less than 8 years of age and persons with very extensive and complex disabilities shall be kept away from the appliance unless continuously supervised.
Children should be supervised to ensure that they do not play with the appliance.
Keep all packaging away from children and dispose of it appropriately.
Keep children and pets away from the appliance when it operates.
Children shall not carry out cleaning and user maintenance of the appliance without supervision.

General Safety

This appliance is intended for domestic use above hobs, cookers and similar cooking devices.
Before carrying out any maintenance, disconnect the appliance from the power supply.
CAUTION: Accessible parts may become hot during use with cooking appliances.
Use only the fixing screws supplied with the appliance if not supplied, use the screws recommended in the installation instructions. Install the appliance in a safe and suitable place that meets installation requirements.
WARNING: Failure to install the screws or fixing device in accordance with these instructions may result in electrical hazards.
Do not use adhesives to fix the appliance.
The minimum distance between the hob surface on which the pans stand and the lower part of the appliance shall be at least 65 cm, unless otherwise specified in the installation instructions for the appliance or hob.
The discharge of air must comply with local authorities regulations.
Ensure good air ventilation in the room where the appliance is installed to avoid the backflow of gases into the room from appliances burning gas or other fuels, including open fires.
Make sure that the ventilation openings are not blocked and the air collected by the appliance is not conveyed into a duct used to exhaust smoke and steam from other appliances (central heating systems, thermosiphons, water-heaters, etc.).
When the appliance operates with other appliances the maximum vacuum generated in the room should not exceed 0.04 mbar.
Make sure not to cause damage to the mains cable. Contact our Authorised Service Centre or an electrician to change a damaged mains cable.
If the appliance is connected directly to the power supply, the electrical installation must be equipped with an isolating device that allows to disconnect the appliance from the mains at all poles. Complete disconnection must comply with conditions specified in the overvoltage category III. The means for disconnection must be incorporated in the fixed wiring in accordance with the wiring rules.
Do not flambé under the appliance.
Do not use to exhaust hazardous or explosive materials and vapours.
Clean the appliance regularly with a soft cloth to prevent the deterioration of the surface material.
Do not use a steam cleaner, water spray, harsh abrasive cleaners or sharp metal scrapers to clean the surface of the appliance. Use only neutral detergents.
Clean grease filters regularly (at least every 2 months) and remove grease deposits from the appliance to prevent the risk of fire.
Use a cloth to clean the interior of the appliance.

Installation

WARNING!
Risk of injury, electric shock, fire, burns or damage to the appliance.

Only a qualified person must install this appliance.
Do not install or use a damaged appliance.
Follow the installation instructions supplied with the appliance.
Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear.
Before installing the appliance remove all the packaging, the labelling and the protective film.
Do not install the exhaust air into a wall cavity, unless the cavity is designed for that purpose.

Electrical connection
WARNING!
Risk of fire and electric shock.

All electrical connections should be made by a qualified electrician.
Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply.
If the symbol ( ) is not printed on the rating plate, the appliance must be earthed.
Always use a correctly installed shockproof socket.
Do not let the electricity mains cable tangle.
Do not use multi-plug adapters and extension cables.
If the mains socket is loose, do not connect the mains plug.
Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.
The shock protection of live and insulated parts must be fastened in such a way that it cannot be removed without tools.
Make sure the appliance is installed correctly. Loose and incorrect electricity mains cable can make the terminal become too hot.
Connect the appliance at the end of the installation. Make sure that there is access to the mains after the installation.

Use WARNING!
Risk of injury, burns and electric shock.

This appliance is for cooking purpose only. Do not use the appliance for other purpose.
Do not change the specification of this appliance.
Do not operate the appliance with wet hands or when it has contact with water.
Use only the accessories supplied with the appliance.
Keep flames or heated objects away from fats and oils during cooking and frying.
Do not use uncovered electric grills.
Do not use the appliance as a storage surface.
Do not use magnifying glasses, binoculars or similar optical devices to look directly at the lighting of the appliance.

Service

To repair the appliance contact the Authorised Service Centre. Use original spare parts only.
Concerning the lamp(s) inside this product and spare part lamps sold separately: These lamps are intended to withstand extreme physical conditions in household appliances, such as temperature, vibration, humidity, or are intended to signal information about the operational status of the appliance. They are not intended to be used in other applications and are not suitable for household room illumination.

INSTALLATION

WARNING!
Refer to Safety chapters.

PRODUCT DESCRIPTION
Control panel overview

| Function| Description
---|---|---
1| Lamp| Turns the lights on and off.
2| First speed / Off| The motor switches to first speed level. Second press turns off the appliance.
3| Second speed| The motor switches to second speed level.
4| Third speed| The motor switches to third speed level.
5| Maximum speed| The motor switches to maximum speed level. After 5 minutes appliance switches to third speed.

Disposal

WARNING!
Risk of injury or suffocation.

Contact your municipal authority for information on how to dispose of the appliance.
Disconnect the appliance from the mains supply.
Cut off the mains electrical cable close to the appliance and dispose of it.

Installation instructions

For complete information about the installation of the appliance refer to a separate installation booklet.

DAILY USE

Using the hood
Check the recommended speed according to the table below.

While heating up food, cooking with covered pots.

                     While cooking with covered pots on multiple cooking zones or burners, gentle frying.
                     While boiling and frying big quantities of food without a lid, cooking on multiple cooking zones or burners.
                     While boiling and frying big quantities of food without a lid, big humidity.

It is recommended to leave the hood operating for approximately 15 minutes after cooking.

To operate the hood:

Press the first speed button to switch on the appliance.
If needed, press the light button to illuminate the cooking surface.
If needed, change the speed by pressing the desired button. To turn off the appliance press the first speed button again.

Remote-control
The appliance is supplied with a remote control. The connection is originally enabled. To connect or disconnect remote-control:

Switch off the appliance.
Press the for 3 seconds.
The indicator on control panel flashes twice if function is enabled and once if disabled.

CARE AND CLEANING

Notes on cleaning

Do not use abrasive detergents and brushes. Clean the surface of the appliance with a soft cloth with warm water and a mild detergent.
After cooking some parts of the appliance can get hot. To avoid stains appliance must be cooled down and dried with clean cloth or paper tow‐els
. Clean stains with a mild detergent.

Keep the hood clean

Clean the appliance and grease filters each month. Clean the interior and grease filters carefully from fat. Fat accumulation or another residue may cause fire.
Grease filters can be washed in a dishwasher. The dishwasher must be set to a low temperature and a short cycle. The grease filter may discolor, it has no influence on the performance of the appliance.

Charcoal filter

The time of saturation of the charcoal filter varies depending on the type of cooking and the regularity of cleaning the grease filter. The activated charcoal filter is not washable, cannot be regenerated and must be replaced approximately every 4/6 months of operation, or more frequently for particularly heavy usage.

Cleaning the grease filter
Filters are mounted with the use of clips and pins on the opposite side.

To clean the filter:

Pull the cover to open it.
Press the handle of the mounting clip on the filter panel underneath the hood.
Slightly tilt the front of the filter downwards, then pull. Repeat the first two steps for all filters.
Clean the filters using a sponge with non abrasive detergents or in a dishwasher.
The dishwasher must be set to a low temperature and a short cycle. The grease filter may discolour, it has no influence on the performance of the appliance.
5. To mount the filters back follow the first two steps in reverse order. Repeat the steps for all filters if applicable.

Replacing the charcoal filter

WARNING!
The charcoal filter is non-washable!

1. Remove the grease filters from the appliance. Refer to “Cleaning the grease filter” in this chapter.
To install a new filter, perform the same steps in reverse order. In any case, it is necessary to replace the filters at least every four months.

Replacing the lamp

This appliance is supplied with a LED lamp. This part can be replaced by a technician only. In case of any malfunction refer to “Service” in the “Safety Instructions” chapter.

ENVIRONMENTAL CONCERNS

Recycle materials with the symbol. Put the packaging in relevant containers to recycle it. Help protect the environment and human health by recycling waste of electrical and electronic appliances. Do not dispose of appliances marked with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office.