Shenzhen Wanda Industrial HL02G Flashlight Instruction Manual
- June 6, 2024
- Shenzhen Wanda Industrial
Table of Contents
Shenzhen Wanda Industrial HL02G Flashlight
Instruction Manual
HI PERFORMANCE LASER FLASHLIGHT WITH 1000 LUMEN LED
The HL02 High Performance Tactical Laser Sight and Flashlight Combo is
designed and built for standard and sub-compact pistols with integrated
railing systems. The HL02 laser is a Class IIIa visible green/red laser with
windage and elevation adjustments with 1000 lumen light. The green laser has
excellent low temperature working pertormance. Rail grip clamp system securely
attaches/detaches quickly and safely with no tools. Use just the laser just
the light or both.
Features
- Ambidextrous On/Off Switch
- Light: Up to 1000 lumen/ laser Wavelength: 520 nm
- Windage and Elevation Adjustments
- Fast, safe, adjustable and secure mounting to pica tinny rail
- Weight: 140g with Batteries
- Dimensions LxWxH: 2.75″x1.6″x1.96″in
- 3 Modes (laser, light, laser/ light) (“light only” can be solid beam or strobe)
- Rechargeabl CR2 battery that can be also replaced from battery cavity
- Laser Sight Can Be Recharged via USB cable with Computer USB, Power Bank USB, Cellphone Charger USB and Car-Charger USB
- Charger Is Not Included, Universal Charger Is OK.
Charging The Battery
*Magnetic Touch Charging
- Take out the charging adapter and cable, connected them together (See figure A)
- Have the charging adapter connected with the cable, the Mag charging Dock connected with the product. (See figure B )
- Charging time: 2 Hours Approx, full In charge when the 4 lndicated lights come In steady.
- Remove deplated batteries, if any. (See figure C)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment