SMEDBO Outline Sensor Activated LED User Manual

October 27, 2023
SMEDBO

SENSOR ACTIVATED
User manual
SMEDBO Outline Sensor Activated LED -

Information & safety

Congratulations on your new bathroom mirror!
We hope you will enjoy it very much. Before you begin to install the mirror, please carefully read and follow the instructions.

  • The mirror should be placed according to the requirements for bathroom and in the correct zone according to IP21.
  • Do not use the mirror outdoors.
  • Make sure the power source comlies with the product specifications.
  • Do not let children play with the mirror.
  • The mirror comes with an uncharged battery and it takes about 5 hours to fully charge.

Kelvin:

SMEDBO Outline Sensor Activated LED - Kelvin

Lumen:

FK487EP, FK488EP, FK487H FK491EP FK492EP
58 Light 68,25 65,36

The light in your mirror!
LED light ring and a built-in sensor that lights up automatically when moving close to the mirror. The LED light ring has an estimated life span of 50 000 h.

Sensor activated LED

The sensor is activated at a distance of 15 cm, it will turn off automatically after 12 seconds without use.

| Premium LED/wall mount
---|---
| Premium LED/freestanding
| Sensor activated
| USB cord enclosed
| Rechargeable battery included
| Main switch ON/OFF
| 7X magnification
| Screw or glue. Glue is not included.
| Hardwired installation

FK487EP/FK488EP/FK491EP/FK492EP

| Power indicator
---|---

Indication light info

| No light ar normal use| | Please charge when red light flashes
---|---|---|---
| One blue flash when turning on| | Pulses red light when charging
| One red flash when turning off| | Blue light when fully charged

Caution!

| Avoid sunlight
---|---

Important!
Tighten screws and retighten later if needed.

SMEDBO Outline Sensor Activated LED - Important

Care instructions!
Wipe with a slightly damp cloth.

Mounting instructions, screw fitting

FK487EP
Dismantel the bracket using the allen key.SMEDBO Outline Sensor Activated
LED - screw fitting1

Drill two holes Ø5 mm and fix the brackets to the wall using the plugs and screws.
Check that the bracket is tightly fixed. Before drilling, make sure you have measured the distance between the wholes carefully.

Fasten the hexagonal screw with the allen key. Switch on.SMEDBO Outline
Sensor Activated LED - screw with the allen key

Tighten screws and retighten later if needed.

Mounting instructions, glue fitting

FK487EP
Dismantel the bracket using the allen key.

SMEDBO Outline Sensor Activated LED - using the allen
key

Carefully follow the instructions for assembly and safety provided by the glue manufacturer.SMEDBO Outline Sensor Activated LED -
Carefully

Fasten the hexagonal screw with the allen key.
Switch on.

Tighten screws and retighten later if needed.

How to charge the battery

FK487EP/ FK488EP
Rechargeable battery, charge with USB.![SMEDBO Outline Sensor Activated LED

Mounting instructions, hardwired

FK487H
Important!

Electrical installations must be performed by an authorized electrician.
Dismantel the bracket using the allen key.

Drill a hole of Ø50 mm and 15 mm dept to the wall.

Drill two holes Ø5 mm and fix the brackets to the wall using the plugs and screws. Check that the bracket is tightly fixed. Before drilling, make sure you have measured the distance between the wholes carefully.

Fix the brackets to the wall using the screws and make sure the bracket is tightly fixed.

Fasten the hexagonal screw with the allen key. Plug into the main socket and switch on.SMEDBO Outline Sensor Activated LED - socket and
switch

Tighten screws and retighten later if needed.

SMEDBO Outline Sensor Activated LED - later if needed1

Mounting instructions, screw fitting

FK491EP/ FK492EP

Dismantel the bracket using the allen key.

SMEDBO Outline Sensor Activated LED - bracket using the allen
key

Drill two holes Ø5 mm and fix the brackets to the wall using the plugs and screws. Check that the bracket is tightly fixed. Before drilling, make sure you have measured the distance between the wholes carefully.

SMEDBO Outline Sensor Activated LED - Drill two holes

Fasten the hexagonal screw with the allen key. Plug into the main socket and switch on.

SMEDBO Outline Sensor Activated LED - Plug into the main socket and
switch

How to charge the battery

FK491EP/ FK492EP
Rechargeable battery, charge with USB.

Test and certification

Tested and approved by TÜV SYD (FK487EP, FK488EP), TÜV Rheinland (FK487H, FK491EP, FK492EP).

Warranty
Made in colid brass with a genuine construction and classic design
Smedbo bathroom products comes with a 10-Year consumer warranty

Recycling
Please recycle the outer package as card board, inner package as plastic and the mirror as electronics. Leave batteries in the propper container at your nearest recycling yard.

SMEDBO AB HEAD OFFICE BOX 13063 250 13 HELSINGBORG SWEDEN TEL +46 42 25 15 00 FM: +46 42 25 15 15
E-MAIL: INFOOSMEDBO.SE
WWW.SMEDBO.NET| DAN MARK SMEDBO
TEL 45 83 58 08
E-MAIL: [email protected]
---|---
UNITED KINGDOM SMEDBO PHONE: 0114 276 0707
FAX: 0114 272 0499
E-MAIL: [email protected]
WWW.SMEDBO.CO.UK| NORGE SMEDBO NORGE NS
TEL 69 36 18 20
E-MAIL: [email protected]
DEUTSCHLAND SMEDBO GMBH AN DER STRUSBEK 68 D-22926 AHRENSBURG
TEL: 04102-2208-0 FM: 04102-2208-22
E-MAIL: [email protected]| FINLAND SMEDBO
PUH: 0207 129 570
E-MAIL: [email protected]

X1710
E60548700REVG

Documents / Resources

| SMEDBO Outline Sensor Activated LED [pdf] User Manual
Outline, Sensor Activated LED, Activated LED, Sensor LED, LED
---|---

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

SMEDBO User Manuals

Related Manuals