seers MH100 Telehealth Gateway Apps Instruction Manual

seers MH100 Telehealth Gateway Apps Instruction Manual

Overview

This manual describes how to use the test app to test MH100’s firmware for VA.

Test preparation

1. FW : MH100 ver 1.0.1A
2. App : HubConnectSample.apk

App

**Test App

**

1. Connect : Connect to MH100’s modem control server

2. Disconnect : Terminate connection with server for modem control of MH100

3. State : Check the connection status of the MH100’s modem control server

4. Login : Login to Hub’s modem control server

5. Modem server ID

6. Modem Server Password

7. Get PPP Connection State: Check the modem connection status

8. Info : Check MH100 information, serial number, firmware version, etc

9. Call : Internet connection to the PPP server via modem
   If your PPP server connection is successful, provide your tablet with internet via Bluetooth

10. PPP server phone number

11. ID for PPP server authentication

12. Password for PPP server authentication

13. PPP Server Option Values

14. Hangup : Terminate modem connection

Test procedure

BT Connection

1. Turn off the tablet’s WIFI.

2. BT Search.
   

3. When the serial of the MH100 you want to connect is displayed, pair with the device.
   

4. When pairing is complete, select the device name again to connect the Bluetooth.
   

How to Perform the test

1. Connect to MH100’s modem control server.
   

2. Log in to the modem control server.
   

3. Check the connection status.
   

4. Check MH100 information.
   

5. Modem connection.
   

6. Stop modem connection.
   

7. Important Cautions

FCC Statement

This device comply with part15 of FCC rules.
Operation is subject to the following two conditions:

• This device may not cause harmful interference.
• This device & its accessories must accept any interference received, including interference that may cause undesired operation.

Part15.21 statement

Changes or modifications not expressly approved by the manufacturer (or party responsible) for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>