SANUS F80b Kit Bracket Mount Wall User Guide

June 6, 2024
SANUS

SANUS LOGO

SANUS F80b Kit Bracket Mount Wall

SANUS F80b Kit Bracket Mount Wall

CAUTION: READ THIS FIRST

PLEASE KEEP PACKING MATERIALS
FOR FUTURE TRANSPORTATION!

DO NOT RETURN TO STORE
We are ready to help! Contact us first with any questions
1-866-309-5962
(Chat) https://tinyurl.com/y2e29xsq

For installing the stand, see the back of this sheet. The information is intended for regular installation of this TV (not for wall mount installation).

Getting started

Please read the entire instructions once before following them step by step.
A wide open space is recommended for assembly.
A Phillips-head screwdriver is required to fasten the stands to the TV set.
Be careful not to injure your fingers and keep children away during assembly.
It is recommended that two or more people remove the TV set from the box.

Caution for packing when you move / ship

Please pack the unit properly by following the diagram on the carton.
Caution!: To avoid damage to the Screen, do not pack the Stand on the same side as the TV screen.

What’s in the box

Unpacking

SANUS F80b Kit Bracket Mount Wall-3

Installing the stands

  1. Remove both of the bottom polystyrene foam bases. Carefully tear the plastic bag until the bottom corner of the TV is exposed.
    SANUS F80b Kit Bracket Mount Wall-4

  2. Lift up one side of the TV approx.
    1 inch (2.5 cm) and insert the matching stand upward until it fits the main unit.

  3. Fasten the matching stand to the TV with 2 screws (included).

Before installing the matching stand, remove the protective cardboard and carefully peel away the film from the area so that it will not get stuck between the unit and the stand.

  1. In the same manner as step 2 , install the other stand.
    SANUS F80b Kit Bracket Mount Wall-5

  2. Fasten the other stand to the TV with 2 screws (included).

  3. Both stands should now be securely fastened.

Lifting the TV set

Connect the power and antenna, cable or satellite

See online owner’s manual for detailed instructions on how to install channels for antenna or cable using RF cable at https://www.usa.philips.com/c-m /consumer-support

SANUS F80b Kit Bracket Mount Wall-7

Connection overview

SANUS F80b Kit Bracket Mount Wall-8

Wall Mount

Wall mount bracket kit

SANUS F80b Kit Bracket Mount Wall-14'

  • Compatible wall bracket kits are available from third party vendors and will allow mounting of the TV on the wall.
  • The recommended wall mount bracket kit (sold separately) allows the mounting of the TV on the wall.
  • For detailed information on installing the wall mount, refer to the wall mount instruction book.
  • Funai Corporation is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV wall mount bracket or mount the TV onto the bracket on your own.
  • The wall mount bracket must be installed by experts.

When installing the unit on the wall, allow this much space.

Top : 11.8 ” (30 cm)
Left and right side : 5.9 ” (15 cm)
Bottom : 3.9 ” (10 cm)

Funai Corporation is not liable for these types of accidents or injuries noted below.

  • Install the wall mount bracket on a sturdy vertical wall.
  • If installed onto a ceiling or slanted wall, the TV and wall mount bracket may fall which could result in a severe injury.
  • Do not use screws that are longer or shorter than their specified length. If screws too long are used this may cause mechanical or electrical damage inside the TV set. If screws too short are used this may cause the TV set to fall.
  • Do not fasten the screws by excessive force. This may damage the product or cause the product to fall, leading to injury.
  • For safety reasons use 2 people to mount the TV onto a wall mounting bracket.
  • Do not mount the TV onto the wall mounting bracket while your TV is plugged in or Turned On. It may result in an electrical shock injury.

Safety instruction

Register online at www.philips.com/welcome today to get the most benefits from your purchase.
Registering your model with Philips makes you eligible for all of the valuable benefits listed below, so don’t miss out.
Register Online at www.philips.com/welcome to ensure:

Product safety notification
By registering your product, you’ll receive notification – directly from the manufacturer – in the rare case of a product recall or safety defect.

Additional benefits
Registering your product guarantees that you’ll receive all of the privileges to which you’re entitled, including special money-saving offers

Know these safety symbols

CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The caution marking is located on the rear or bottom of the cabinet.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the apparatus’s enclosure that may be of  sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the apparatus.

WARNING:
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.

CAUTION:
To prevent electric shock, match wide blade of plug to wide slot, fully insert.

For fastest support visit us online for chat and self service solutions at www.philips.com/support

CHILD SAFETY

PROPER TELEVISION PLACEMENT MATTERS
THE CONSUMER ELECTRONICS INDUSTRY CARES

  • Manufacturers, retailers and the rest of the consumer electronics industry are committed to making home entertainment safe and enjoyable.
  • As you enjoy your television, please note that all televisions – new and old- must be supported on proper stands or installed according to the manufacturer’s recommendations. Televisions that are inappropriately situated on\ dressers, bookcases, shelves, desks, speakers, chests, carts, etc., may fall over, resulting in injury.

TUNE IN TO SAFETY

  • ALWAYS follow the manufacturer’s recommendations for the safe installation of your television.
  • ALWAYS read and follow all instructions for proper use of your television.
  • NEVER allow children to climb on or play on the television or the furniture on which the television is placed.
  • NEVER place the television on furniture that can easily be used as steps, such as a chest of drawers.
  • ALWAYS install the television where it cannot be pushed, pulled over or knocked down.
  • ALWAYS route cords and cables connected to the television so that they cannot be tripped over, pulled or grabbed.

WALL OR CEILING MOUNT YOUR TELEVISION

  • ALWAYS contact your retailer about professional installation if you have any doubts about your ability to safely mount your television.

  • ALWAYS use a mount that has been recommended by the television manufacturer and has a safety certification by an independent laboratory (such as UL, CSA, ETL).

  • ALWAYS follow all instructions supplied by the television and mount manufacturers.

  • ALWAYS make sure that the wall or ceiling where you are mounting the television is appropriate. Some mounts are not designed to be mounted to walls and ceilings with steel studs or cinder block construction.
    If you are unsure, contact a professional installer.

  • Televisions can be heavy. A minimum of two people is required for a wall or ceiling mount installation.

MOVING AN OLDER TELEVISION TO A NEW PLACE IN YOUR HOME

  • Many new television buyers move their older CRT televisions into a secondary room after the purchase of a flat-panel television. Special care should be made in the placement of older CRT televisions.
  • ALWAYS place your older CRT television on furniture that is sturdy and appropriate for its size and weight.
  • NEVER place your older CRT television on a dresser where children may be tempted to use the drawers to climb.
  • ALWAYS make sure your older CRT television does not hang over the edge of your furniture.

Important safety instructions

  1. Read these instructions.

  2. Keep these instructions.

  3. Heed all warnings.

  4. Follow all instructions.

  5. Do not use this apparatus near water.

  6. Clean only with dry cloth.

  7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

  8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

  9. Do not defeat the safety purpose of the polarized or grounding-type plug.
    A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

  10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

  11. Only use attachments/accessories specified by the manufacturer.

  12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart / apparatus combination to avoid injury from tip-over.

  13. Unplug this apparatus during lightning storms or when unused for long periods of time.

  14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Note to the CATV system installer:
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

Example of antenna grounding as per NEC – National Electric Code

SANUS F80b Kit Bracket Mount Wall-9

Notice
Trademarks are the property of Koninklijke Philips N.V. or their respective owners.
Funai Corporation reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly.
The material in document is believed adequate for the intended use of the system. If the product or its individual modules or procedures are used for purposes other than those specified herein, confirmation of their validity and suitability must be obtained.
Funai Corporation warrants that the material itself does not infringe any United States patents. No further warranty is expressed or implied. Funai Corporation cannot be held responsible neither for any errors in the content of document nor for any problems as a result of the content in document. Errors reported to
Funai Corporation will be adapted and published on the Funai Corporation support website as soon as possible.

Pixel characteristics
This LCD product has a high number of color pixels. Although it has effective pixels of 99.999% or more, black dots or bright points of light (red, green or blue) may appear constantly on the screen. This is a structural property of the display (within common industry standards) and is not a malfunction.

Warranty
No components are user serviceable. Do not open or remove covers to the inside of the product. Repairs may only be done by service centers and official repair shops. Failure to do so shall void any warranty, stated or implied.
Any operation expressly prohibited in document, any adjustments or assembly procedures not recommended or authorized in document shall void the warranty.
The following FCC applies to the wireless LAN adapter included in this product.

FCC

caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

FCC RF Exposure Compliance
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines.
This equipment should be installed and operated keeping the radiator at least 20cm or more away from your body.
Compliance with FCC requirement 15.407(c)
Data transmission is always initiated by software, which is the passed down through the
MAC, through the digital and analog baseband, and finally to the RF chip. Several special packets are initiated by the MAC. These are the only ways the digital baseband portion will turn on the RF transmitter, which it then turns off at the end of the packet. Therefore, the transmitter will be on only while one of the aforementioned packets is being transmitted. In other words, this device automatically discontinue transmission in case of either absence of
information to transmit or operational failure.

Positioning the TV

  • Large screen TVs are heavy. 2 people are required to carry and handle a large screen TV.
  • Make sure to hold the upper and bottom frames of the unit firmly as illustrated.
  • Install the unit in a horizontal and stable position.
  • Do not install the unit in direct sunlight or in a place subject to dust or strong vibration.
  • Depending on the environment, the temperature of this unit may increase slightly. This is not a malfunction.
  • When installing this unit in a temperate environment, avoid a place with rapid temperature changes.
  • This unit should not be used in a tropical environment as it has not been evaluated under such conditions.
  • No objects should be placed directly on or under this unit, especially lighted candles or other flaming objects.
  • Depending on your external devices, noise or disturbance of the picture and / or sound may be generated if the unit is placed too close to them. In this case, please ensure enough space between the external devices and the unit.
  • Do not insert the AC power cord into the power socket outlet before all the connections are made.
  • Ensure that you always have easy access to the AC power cord and outlet to disconnect the TV from the AC outlet.
  • Before you move the TV, disconnect attached cables to prevent damage to connectors, especially the TV tuner.
  • Be sure to unplug the AC power plug from the AC outlet before moving or carrying the unit.
  • When moving the TV and then setting it down, please be careful not to pinch the AC power cord under the unit.

Regulatory notices
WARNING: To prevent injury, this apparatus must be securely attached to the furniture / wall in accordance with the instructions.
Tipping, shaking or rocking the unit may cause injury/death.
WARNING: Never place a TV in an unstable location. A TV may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

  • Using cabinets or stands recommended by the manufacturer of the TV.

  • Only using furniture that can safely support the TV.

  • Ensuring the TV is not overhanging the edge of the supporting furniture.

  • Not placing the TV on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the TV to a suitable support.

  • Not placing the TV on cloth or other materials that may be located between the
    TV and supporting furniture.

  • Educating the children about the dangers of climbing on furniture to reach the TV or its controls.
    If your existing TV is being retained and relocated, the same considerations as above should be applied.
    Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing or climbing on it. A falling unit can cause serious injury or even death.
    In order to avoid interruption of ventilation, this unit should not be placed in built-in equipment such as a book cabinet, rack, etc., and the vents of this unit should not be covered with anything such as a tablecloth, curtain, newspaper, etc. Make sure that there is enough ventilation space (4 ” / 10 cm or more) around this unit.
    Press to turn the unit on and go into standby mode. To completely turn off the unit, you must unplug the AC power plug from the AC power outlet.
    Disconnect the AC power plug to shut the unit off when trouble is found or not in use. The AC plug shall remain readily available.

Never use a gas duster on this TV.
The gas trapped inside of this unit may cause ignition and explosion.

Environmental care
The packaging of this product is intended to be recycled.
Contact your local authorities for information about how to recycle the packaging.
For product recycling information, please visit – www.recycle.philips.com

End of life directives
Philips pays a lot of attention to produce environmental-friendly products in green focal areas. Your new TV contains materials which can be recycled and reused. At the end of its life, specialized companies can dismantle the discarded TV to concentrate the reusable materials and to minimize the amount of materials to be disposed of. Please ensure you dispose of your old TV according to local regulations.

Batteries usage
CAUTION : Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
WARNING : Batteries (battery pack or battery installed) should not be exposed to excessive heat such as sunshine, fire or the like.

  • Do not mix old and new batteries.

  • Do not mix alkaline, standard (carbon-zinc) or rechargeable (ni-cad, ni-mh, Li-ion, etc.) batteries.
    Disposal of used batteries
    The batteries supplied do not contain the heavy metals mercury and cadmium, however in certain localities, disposing batteries with household waste is not permitted. Please ensure you dispose of batteries according to local regulations.
    Downloading an owner’s manual
    To obtain a more detailed owner’s manual of document:

  • Point your browser to : www.philips.com/support

  • Choose your country of location with language.

  • Enter the product name or number in the search field.

Alternatively, you can browse the catalog.

  • Click the Description or Model.

  • Under Product support, click “User manual”.
    Portions of this software are copyright © The FreeType Project (www.freetype.org).
    The American Academy of Pediatrics discourages television viewing for children younger than two years of age.
    Some apps are not pre-installed, internet connection is required for download.
    Some features may require an always-on broadband internet connection, firmware update and/or a minimum bandwidth. Internet services vary by location.
    Funai Corporation Inc. does not warrant access to the portal or to any of the services, content, software and advertising. Funai Corporation Inc. may, in its sole discretion, add or remove access to any specific services, content, software and advertising at any time.
    Although Funai Corporation Inc. will strive to provide a good selection of services, content or software, Funai Corporation Inc. does not warrant continued access to any specific services, and content or software.

  • Funai Corporation Inc. does not warrant Wireless Screencasting compatibility with all source devices such as smartphones, tablets, laptops, etc. due to large variability in hardware, firmware, drivers, software and implementation of wireless casting applications on these source devices. Although Funai Corporation Inc. will strive to enhance compatibility and performance across a range of source devices, Funai Corporation Inc. does not warrant compatibility with specific source devices.

Limited warranty

Limited warranty one (1) year
Warranty coverage:

This warranty obligation is limited to the terms as set forth below.

Who is covered:
This product warranty is issued to the original purchaser or the person receiving the product as a gift against defects in materials and workmanship as based on the date of original purchase (“Warranty Period”) from an Authorized Dealer. The original sales receipt showing the product name and the purchase date from an authorized retailer is considered such proof.

What is covered:
This warranty covers new products if a defect in material or workmanship occurs and a valid claim is received within the Warranty Period. At its option, the company will either

  1. repair the product at no charge, using new or refurbished replacement parts, or (2) exchange the product with a product that is new or which has been manufactured from new, or serviceable used parts and is at least functionally equivalent or most comparable to the original product in current inventory, or (3) refund the original purchase price of the product.
    Replacement products or parts provided under this warranty are covered against defects in materials and workmanship from the date of the replacement or repair for ninety (90) days or for the remaining portion of the original product’s warranty, whichever provides longer coverage for you. When a product or part is exchanged, any replacement item becomes your property and the replaced item becomes company property. When a refund is given, your product becomes company property.

Note: Any product sold and identified as refurbished or renewed carries a ninety (90) day limited warranty.
Replacement product can only be sent if all warranty requirements are met. Failure to follow all requirements can result in delay.

What is not covered – Exclusions and limitations:
This Limited Warranty applies only to new company manufactured products that can be identified by the trademark, trade name, or logo affixed to it. This Limited Warranty does not apply to any hardware product or any software, even if packaged or sold with the product, as manufacturers, suppliers, or publishers may provide a separate warranty for their own products packaged with the bundled product.
The company is not liable for any damage to or loss of any programs, data, or other information stored on any media contained within the product, or other additional product or part not covered by this warranty. Recovery or reinstallation of programs, data or other information is not covered under this Limited Warranty.
This warranty does not apply (a) to damage caused by accident, abuse, misuse, neglect, misapplication, or non-supplied product, (b) to damage caused by service performed by anyone other than company approved Authorized Service Location, (c) to a product or a part that has been modified without written company permission, or (d) if any serial number has been removed or defaced, or (e) product, accessories or consumables sold
“AS IS” without warranty of any kind by including refurbished product sold “AS IS” by some retailers.

This Limited Warranty does not cover:

  • Shipping charges to return defective product.
  • Labor charges for installation or setup of the product, adjustment of customer controls on the product, and installation or repair of antenna/signal source systems outside of the product.
  • Product repair and/or part replacement because of improper installation or maintenance, connections to improper voltage supply, power line surge, lightning damage, retained images or screen markings resulting from viewing fixed stationary content for extended periods, product cosmetic appearance items due to normal wear and tear, unauthorized repair or other cause not within the control of the company.
  • Damage or claims for products not being available for use, or for lost data or lost software.
  • Damage from mishandled shipments or transit accidents when returning product.
  • A product that requires modification or adaptation to enable it to operate in any country other than the country for which it was designed, manufactured, approved and/or authorized, or repair of products damaged by these modifications.
  • A product used for commercial or institutional purposes (including but not limited to rental purposes).
  • Product lost in shipment and no signature verification receipt can be provided.
  • Failure to operate per document.

To obtain assistance…
Contact the Customer Care Center at:

1 866 309 5962
Chat with us:
https://tinyurl.com/y2e29xsq
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CONSUMER, WITH THE ISSUING COMPANY NOT LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY.
Some states do not allow the exclusions or limitation of incidental or consequential damages, or allow limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you.
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.
Funai Service Corporation, 2425 Spiegel Drive, Groveport, OH 43125, USA

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals