Shenzhen Mangukechuang Technology MANGOOD-266 Wireless Remote Control Switch Instructions
- June 6, 2024
- Shenzhen Mangukechuang Technology
Table of Contents
Shenzhen Mangukechuang Technology MANGOOD-266 Wireless Remote Control
Switch
Overviews
TJFC433 is a very beautiful appearance of the 1527 learning remote control, the shell, using imported high-quality flame-retardant ABS material production, metal outer ring can prevent damage, panels and buttons give a very good texture, safe and reliable use. It uses a surface acoustic resonator and a high-power RF circuit.
The circuit consumes current only when the button is pressed. It does not consume power at ordinary times. It is simple to use and can work with the common ASK super-regeneration or super-heterodyne receiving circuit, it has high-frequency stability
Product characteristics
- Working Voltage: DC3V
- Operating Current: 7mA
- Static Current: 0 mA
- Operating Frequency: 433.89M
- Frequency stability: Stabilized by SAW (+-75KHZ)
- Coding chip: Learning Code (1527, etc.)
- Power: > 8mw
- Launch Distance: > 200m (Open Space, with RM03 module receiving sensitivity of-110dbm, 1/4 wavelength single conductor)（9）Data rate：2.4KHz
- MODULATION: Ask
- Oscillating resistance: According to the Customer’s requirement
- Operating temperature: -20℃ ~ 70℃
SCOPE of application
- Auto remote door switch (RKE)；
- Remote Control Door Opening Machine, road gate;
- Wireless Security Alarm;
- Remote Control Curtain Machine;
- Wireless Industrial Controller;
- Wireless data transmission
Instructions
Receiver to the remote control for the code learning can be used in pairs.
That is, the receiver goes into the learning receiving state (press the
learning key) , then press any key of the remote control, the receiver gives
instructions accordingly when the code output by the remote control is
successfully learned, the learning is
complete
Name Interpretation
- 433-433.89M
- 433. Represents the remote control model；
- 433.89M. The frequency is 433.89Mhz；
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver. -
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-
Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation
Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
Chongqing Woao Mechanical and Electrical Co., LTD
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>