gorsun E Series E83 Wireless Bluetooth Headphones User Manual

E Series E83 Wireless Bluetooth Headphones
User Manual

Parameter

Button interface

M/| wireless/FM/TF| Function key to switch to each other,3I English full name(Mode)/Long press to turn off the light.
---|---|---
+| Next/Volume-| Short press, under a song/the next station. According to the long, The volume increase
–| On a/Volume-| Short press, a song/On a radio.According to the long, The volume increase
| boot TO turn it off IIang up| A short press on/ Long press 3-sec ones to hang up /Press 3 times to switch between Chinese and English.
| Tf Card slot| Insert TF card, playing card MP3 Song files.
I/O| Audio I/O interface| External ear airport speaker audio input,
Headphones audio output to external speakers.
U SB| Charging| Connect the charger USB charging.

3. By using the tutorial
Indicator—light(green) straight flash card reader,wireless(blue/ green light),FM radio(green),State of Charge(red).
3.1. wireless

1. Switch, Hold down The) headset will then start. Light blue light and green light flashing in each other. Headset wireless on, Waiting for connection state. wireless headset thas place ai this time in the state can behind.
2. Click on the Wireless Settings in the phone Settings, select “open”.This is opened Mobile phone wireless function.
3. Open the phone’s BlueTooth option, to find, search to wait for matching success Bluetooth, shown on the list of equipment available for[ E ] click [ E ] connection, at this time Headphones light flashing,says it has the connection is successful.
   Note: the part of the mobile phone connection, instructions Need to enter the password(0000).

3.2.TF CardPlay
Insert TF to headphones in the card slot, long-press the M key switch to the card read mode, indicator light, Flashing. The system automatically decoded the audio format file, at this point your favorite melodious songs are Gentle.
3.3 SMItadio
Long press the M key switch to read card module, indicator light green light flashing. At this point may be heard the hiss, It said there was no radio, short press the M Key, theheadset will automatically search radio show. Blue lights flashed until no flash, searching. Short press the + key and key can switch electric up and down Channel, /
3.4.Switch on/ hang up
Short by answering the telephone, long press for 3 seconds to hang up the phone.
4 .Charging
Beforeeharging, the headset off, to make the charging line headset with a computer USB connection, The headset indicator light is red, the headset is charging. The built-in battery capacity test and fire protection. Don’t have to worry about the charging time of the battery impact. Light automatically extinguished said charging has been completed. Low—power low battery automatically shut down, please charge as soon as possible, so as to meet the bus system requirements. Note: please don’t open the headset in the process of charging, otherwise damage the headset battery hardware life.
5. Matters needing attention
1 )this headset is not waterproof, please pay attention to waterproof and moisture prroof, to ensure that the system can be positive Often use.
2)it is the main support for computer USB charging, don’t change or connect it to the outside charging power supply.
3)headset can not be placed for a long time, please charge and discharge once a week, so as to extend the electricity The pool of life.
6. To record the line connection phone listening to music, please turn off the power supply, lest cause noise.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>