MEDICAL GUARDIAN MG Move Smartwatch User Guide
- June 6, 2024
- MEDICAL GUARDIAN
Table of Contents
MGMove
QUICK START GUIDE
Step 1: Charge
- Begin by facing the red SOS Button up and align the pins on the Charging Cradle with the back of the watch. Voice Assist will announce that the device has been correctly seated on the charger.
- The device will take approximately 2-3 hours to fully charge. The green Full Charge light will appear at the base of the cradle.
LED Legend
Full Charge
Not Charging (Adjust Cradle)
Under 97% Charge
Step 2: Activate
- Fully charge your device. Tap the watch face to get to the home screen. Then, tap the Test App to initiate the automated testing process.
- A call will be placed to our Monitoring Center. Follow the voice prompts as directed until you hear a success confirmation.
- Your system will be in test mode for a few moments, after which your system will be fully operational.
Step 3: Fit Your Band
- Take the side of the wristband with the holes, and pass it through the opening of the metal clasp. Secure the metal anchor pin through the hole that would best fit your wrist.
- Close clasp, if the fit is too loose repeat the first step until the desired fit is achieved.
NOTE: You will only do this for the initial fitting. Once you have set the band to the correct size, you can use the side clasp buttons to put on and remove your watch easily.
Step 4: Put it On and Go!
Congratulations! You are now ready to live your life without limits while feeling safe & protected everywhere you go.
Stay Safe
Help is only a button press away at all times.
Stay Active
Set your step counting goal & get moving!
Stay Covered
GPS will keep you connected.
Find more information on our support site: medicalguardian.com/support/mgmove
What’s in the Box
About the
Support Circle Apps
MGDOC-10491
The Essential Plan does not include the Support Circle Apps.
Want to Upgrade Your Plan? Call Now!
1 800-313-1191
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>