GOLREX T59 Bluetooth Headphones Wireless Earbuds User Manual
- June 6, 2024
- GOLREX
Table of Contents
T59 User Manual
Wireless Earbuds
Customer Service
Email: support@golrex.net
Web: (www.golrex.neto)
Package Accessories
Overview
Product Parameters
- BT Version: BT5.0
- Supports: HSP/HFP/A2DP/AVRCP
- Charging Interface: Point-Contact
- Charging Port: Type-C
- Battery Capacity: (Li-ion battery inside) Earbud: 50mAh Charging case: 650mAh
- Battery Life: Twin Earbuds will last 8hrs on a single full charge(Actual battery life changes with the song types and volume requirements)
- Standby Time: Up to 100hrs
- Charging Time: 1-1.5hrs for earbuds/2hrs for charging case
- Transmission Range: 33 feet (with no obstacle)
First- Use
- After you open the package for the first time use, please tears off the insulation film on the earbuds, then charge both earbuds and charging case via supplied Type-C Charging Cable for at least 10mins (or not in use for a long time); do not take out the earbuds during this period.
- The earbuds are installed with a pair of medium-sized ear tips by default. Please select a suitable size for a secure fit.
How to Wear?
Step 1: Adjust sound holes downwards and push earbuds into your ears.
Step 2: Slightly move earbuds to fit you best.
How to Pair?
Method 1:
-
Pick up two earbuds from the charging case, and they will auto power on and pair with each other in 10s.
If the earbuds are not connected to your device over 5 minutes, the earbuds will power off automatically. Turn on the earbuds manually by pressing down the MFB button for about 2 seconds at the prompt “power on”. -
The white indicator light of dual earbuds flashes to enter pairing mode.
-
On phone, search for “T59” and tap to connect.
There is a voice prompt “connected” from both earbuds if you wear them. And the indicators of both earbuds will turn off.
Method 2: In the unconnected state, double-click the MFB of two earbuds to enter pairing mode.
How to Reset?
-
Delete the pairing name “T59” on your mobile phone and turn off the BT function.
-
Turn off the earbuds then press and hold the MFB for 8s in a power-off/unconnected state, release the MFB after the red and white LED indicators rapidly flash three times at the same time.
-
Put the earbuds back into the charging case and close the charging case.
-
Take out the earbuds from the charging case and they enter pairing mode. That means the earbuds have been reset successfully.
-
If the reset fails, please repeat the above steps.
Indicator status of the earphone
Power-on: White light for ls;
Power-off: Red light for ls;
Pairing mode of the earphones: White light of dual earbuds flash;
Device to be connected mode: White light of the main earphone flashes;
Connected to the standby state: White light on the L/R earphone for ls
after connected, then goes out;
Phone state: White light goes out.
Indicator status of the battery case
- Charge the case: Plugin USB charging cable, the LED bar on the front shell of the charging case flashes slowly during the charging process.
- Charge the earphone with a charging case (without an external charger): Put the earphone into the charging case, the earbuds will be charged immediately, and the red indicator flashes.
- Charging case is fully charged (plug cable): LED indicator bar is always on (blink slowly during charging).
Package Accessories
Power on: Pick up the earbud from the charging case/Press and hold the
MFB for 2s in power-off state
Power off: Put back into the charging case/Press and hold the MFB for 5s
in non-playing state/Not connected to any devices over 5 minutes
Activate/Stop the voice assistant: Triple-click the MFB on the L/R earbud
Reject call: Press and hold the MFB on the L/R earbud for 2s
Answer/End call: Click once Play/Pause: Click once
|
---|---
How to charge?
Type-C USB Charging
There is a Type-C USB charging cable in the package, please use it to charge
the case directly. During Charging, the digital display will flash and display
the battery in real-time. After a full charge, the number is displayed as 100.
And the right side is assigned to a charging process per bud, there are
separated power consumption indicators by 4 grids in total, the indicator
light will always flash during Charging.
Wireless Charging
Easy to charge your charging case without cables, just put your charging case
on the wireless charging pad. If the charging case doesn’t start to charge,
please try to reposition it. (Wireless Charging Pad Not Included)
Troubleshooting Guide
Ql: What should I do when the earbuds can’t be paired with my mobile
device?
Al: Reset your earbuds and pair the earbuds with your mobile device
again.
Q2: What to do when the earbuds can’t be charged?
A2: The Charging Case may run out of power. Please charge it for at least
one hour, then put the earbuds into it to charge. Try to take out the earbuds
and clean the Charging Pins, then put the earbuds into the Charging Case to
see if the leftmost and rightmost LED Indicators on the Charging Case light
up. There may be some malfunction with your Charging Case. If your Charging
Case can’t charge for earbuds after many attempts, please contact us.
Q3: What should I do if there is no sound from one earbud?
A3: Turn off Bluetooth on the device and turn it on, then pair your
earbuds with the mobile device again. For Android devices, if there is no
sound from one earbud after connecting, you need to check whether the phone
volume is too low. If the phone volume is normal, it may be that the volume of
the earbud has been turned to the minimum. Please try to adjust the volume of
the earbud.
Q4: What device can the earbuds be connected to?
A4: Devices with BT version over 5.0
Q5: Can my earbuds be paired with multiple devices?
A5: The earbuds don’t support this function currently.
Q6: Can I use one earbud at a time? A6: Yes. After connecting the earbuds
to your mobile device, you can use them together or just use one earbud alone.
Q7: Can I activate voice assistant through my earbuds?
A7: Yes. You can wake up voice assistant by tapping the Touchpad of
either earbud 3 times after pairing the earbud with your mobile device.
|
---|---
[support@golrex.net](support@golrex.net)| http://www.golrex.net?scan=1
Thank you for purchasing the authentic product.
For more latest products, parts, and
accessories, please visit: www.golrex.net
For any assistance please contact
Email: support@golrex.net
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>