ViviMAGE E10 10.1 Inches Tablet User Guide

: June 6, 2024
: VIVIMAGE

ViviMAGE E10 10.1 Inches Tablet

PRODUCT OVERVIEW

ViviMAGE E10 10.1 Inches Tablet Fig1

Headphone Jack
Volume+/-
Reset Hole
Micro HD Port (Maximum resolution: 1920xl080 3GHz)
USB-C Port
Memory Card Slot
Microphone
Power Button
Speakers
Front-facing Camera
Keyboard Mounting Holes
Keyboard Pins
Flash
Rear Camera

GETTING STARTED

Charge

If the tablet cannot be powered on at your first try, please charge it for more than 30 minutes, then try again.
It is recommended that you fully charge the device before using your device for the first time.
For a quick check of the battery level:
View the battery status icon on the upper right of the Home Screen when the tablet powered on:
- During Charging: 11%
- Fully Charged: 100%
- View the battery charge indicator on display when the tablet powered off:
- During Charging: 71%
- Fully Charged: 100%

Power On/Off

Press and hold the power button for 2~3s to turn on your tablet. Select your language and set up your tablet following the start guide.
Press and hold the power button for 2s, then release it. It will show Power off, Restart and Screenshot on the screen. Tap Power off to turn off the tablet.
Press and hold the power button for 10s to do a forced reboot when it’s frozen.

Battery

A rechargeable Li-ion battery is installed in the tablet.
DO NOT attempt to replace the tablet battery by yourself because you may damage the battery, which might cause overheating, fire or injury.
DO NOT dispose of tablet in a fire.
DO NOT expose the tablet battery to any heat source, direct sunlight or high temperature.
Only use the ORIGINAL power adapter provided by us to charge the tablet battery.
We suggest you drain the battery completely once a month if only use your tablet occasionally.
The Li-ion battery in your tablet should be serviced or recycled by an authorized service provider, and must be recycled or disposed of separately from household waste.
Dispose of battery according to your local environmental laws and regulations.

Sleep Mode

Simply press the power button once to switch the tablet to the Sleep Mode when the tablet is ON; press again to wake it up.

Tip: Go to Settings> Display> Advanced> Screen timeout to set the time of entering the Sleep Mode.

Screenshot

Press the Volume- button and the Power On/Off button for2 seconds to capture a picture.
Press and hold the power button for 2s, then release it. It will show Power off, Restart and Screenshot on the screen. Tap Screenshot to capture a screenshot.

HOME SCREEN

Icons on the Bottom Menu

Back
Home Screen
Recent Activities
Status icon
Google Search Bar

Home Settings, Widgets and Wallpapers

ViviMAGE E10 10.1 Inches Tablet Fig3

Tap and hold the empty section of a Home Screen, Home Settings, Widgets and Wallpapers will be displayed.

Tap Home Settings to start customizing your Home Screen.
- Notificaton dots: Show/hide the small circular dots that sit on the upper right corner of your App icons.
- Add icon to Home Screen: Allow the new Apps installed from Play Store to be displayed on the Home Screen.
- Show Google App: Show Google Apps when you swipe leftward on the main Home Screen ..
Tap Widgets, touch and hold any application (e.g. Clock), then slide and add it to a Home Screen. Remove it by sliding it to X Remove.
Tap Wallpapers to change the current wallpaper of the tablet from the Live Wallpapers, your photos or the default wallpapers.

SETTING BASICS

Quick Settings Swipe down from the top of the screen to access Quick Settings.

Wifi. Tap to connect/disconnect to a wireless network.
Bluetooth. Enable/disable the Bluetooth of the tablet.
Do not Disturb. Mute sound and stop vibration after enabling this function.
Auto-rotate. Turn on/off the Auto-rotate of the screen.
Battery. Tap to choose the power setting you prefer to save the battery time.
Airplane mode. Turn on/off all the network connectivity.
Eye comfort. The blue light will be filtered out and the screen will take on a tint of yellow after enabling this option.
Read Mode. The screen will be black and white after enabling this option.
Location. Enable/disable location access.
Nearby Share. Enable to instantly share files, links, pictures and more with people around you both on line and offline.

Tap the icon to change the options in the Quick Settings. Long press each icon to enter the interface of its detailed settings.

More Settings

Go to Quick Settings, then tap the O icon to enter the detailed setting interface. Or, tap Settings App on the Home screen to enter.

Network & internet

Connect to any working Wifi
Monitor the data usage
Enable/disable the Airplane Mode
Add VPN connections

Connected devices

Pair with Bluetooth devices and check the paired devices
Turn on/off Bluetooth
Check the connection status of the cast devices
Add and check printers
Check the received files from other devices via Bluetooth connection
Enable Nearby Share to share files with nearby devices and more

Apps & notifications

Check the Apps recently opened
Check all the Apps on the tablet
Adjust App notification settings
Check the screen time for Apps
Set default apps
Set the App

Battery

Display the remaining battery power as a percentage
Enable/disable Battery Saver
Enable/disable Battery percentage
Check the time for Last full charge and Screen usage since full charge

Display

Adjust the screen brightness
Turn on/off Eye comfort
Change the wallpaper
Enable/disable the Dark theme
Adjust the time of entering the Screen timeout
Adjust the font size and display size and more

Sound

Set sound level for Media, Alarm and Notification
Enable/disable Do Not Disturb to mute sound and stop vibration
Set default notification ound and alarm sound
Enable/disable Screen locking sounds, Charging sounds and vibration and Touch sounds and more

Storage

View and manage your storage space

Privacy

Set app permissions
Set to show/hide the password when input a password
Set the Lock screen preferences
Add an account and autofill service from Google and more

Location

Turn on/off the location services for specific apps
Set apps that have access to location
Enable/disable WiFi and Bluetooth scanning and more

Security

Check the security status
Set screen lock pattern, e.g. Swipe, Pattern, PIN and Password
Choose a Smart Lock to keep the device unlocked if you preset a lock pattern
Allow the a keep the device unlocked if you preset a lock pattern

Account

Add and manage the user account on your tablet

Accessibility

For vision and hearing impaired users, manage settings for SCREEN READERS, DISPLAY, INTERACTION CONTROLS, AUDIO & ON-SCREEN TEXT and EXPERIMENTAL

Digital Wellbeing & parental controls

Check your app usage based on Screen time, Notifications received, or Times opened from Dashboard
Set a schedule for Wind Down and switch on the setting options you prefer
Manage the related notification settings to reduce interruptions
Set.up.f’arental.controls to help your kids balance their screen time

Google

Set the preferences for Google” related services

System

Set Language
Tap Languages & input> Languages> +Add a language to add your language. After adding, hold and slide the = to the top to change the language
Set the date and time
Turn on/off the Back up to Google Drive
Restore factory setting
Tap Reset options> Erase all data (factory reset) to restore the factory setting

About tablet

Check the detailed information about the tablet

NETWORK CONNECTION

Launch the App Settings or long press the Wifi/Bluetooth icon in Quick Settings.

Wifi Connection

Tap Network& internet and turn on the Wifi. All the Wifi connections available will be listed.
Select yourWifi and input the correct password.

Bluetooth Pairing

Please turn on the Bluetooth on your bluetooth devices firstly.

Go to Connected devices> Connection preferences> Bluetooth to turn on the bluetooth on your tablet.
Tap +Pair new device to enter the scanning interface. Devices available will be displayed after a few seconds.
Tap the desired device to get a paring code and click PAIR on both devices. The automatic connection is applied to some devices.

APP MANAGEMENT

App Download and Installation

Tap and open Play Store on the Horne Screen.
Log into your google account, then search and download the App you need.
Move the App Tap and hold the App, then slide it to a desired screen.
Remove the App from the Home screen Touch and hold the App, then slide to X Remove to remove it from your Home Screen.
Uninstall the App Touch and hold the App, then slide to the @ Uninstall to uninstall the App.
Clear the Cache of the App
- Go to Settings> Apps & notifications.
- Select an App> Storage & cache> CLEAR CACHE to clear the cache.

Please make sure the tablet is connected to a working Wifi network before navigating the Internet. You may use the pre-installed Chrome browser or use another browser downloaded on the Play Store.

MULTIMEDIA

Connecting to a Computer

Connect your tablet to the computer with a USB-C cable.
File Transfer is the default setting. Go to your computer and find your tablet VIVIMAGE_ElO to transfer files between your tablet and computer.

Tips: Go to Quick Settings, tap Android System · USB file transfer turned on> Tap for more options> USB Preferences to select the option preferred.

Select File Transfer to transfer files between the devices.
Select MIDI to play MIDI instruments on the tablet.
Select PTP to transfer photos between the devices.
Select No data transfer to charge your tablet only.

Connecting to an External Device

Install a memory card with the capacity up to 512GB into the memory card slot when the tablet is off.
Turn on the tablet, then go to Quick Settings and tap to SET UP.
Set the memory card as a portable storage by selecting Portable storage. Enter memory card storage to move files between the card and tablet.

Screen Mirroring

Option 1: Wired Connection Use a mini HDMI cable to connect the tablet to a compatible device with HDMI In port. Tip: HDMI enabled is required for wired connection. Go to Settings> Display> Advanced> HDMI settings> HDMI to check if it’s on when the screen mirroring is not working.
Option 2: Wireless Connection
- Step 1: Connect the tablet and a compatible device to the same Wi-Fi network. Please make sure the Wi-Fi is stable and smooth.
- Step 2: Go to Settings> Connected Device> Connection Preferences> Cast, tap : and turn on “Enable wireless display”.
- Step 3: Tap the Cast icon in Quick Settings to search the device and start connection.

TROUBLESHOOTING

If you have any questions, please feel free to contact vivimage support at [email protected] or [email protected].

Ql. The tablet doesn’t power on.
- Reboot your tablet after charging for more than 30 minutes.
- Press the power button to check if the tablet is in the Sleep Mode.
- Press and hold the power button for 10s to reboot it.
- insert a pin into the reset hole on the tablet, then try again.
Q2. The tablet doesn’t charge.
- Make sure the USB cable is properly plugged into the charging port.
- Try another compatible USB cable and adapter.
Q3. Error message occurs during the operation.
- Uninstall the App with error message, then download and install again.
- Insert the pin into the Reset Hole to power off the tablet, then power on the tablet to try again.
Q4. The tablet cannot be detected by the computer.
- Make sure the tablet is powered on.
- Try another USB cable.
- Try another USB port on the computer.
- Instead of No data transfer, choose File Transfer or PTP when connecting the tablet to the computer.
QS. The tablet cannot connect to the Wifi.
- Make sure the Wifi in your tablet is ON.
- Make sure you input the correct password when connecting the Wifi.
- Restart the router.
- Make sure there is no filter setting or device connection limitation in the setting of the router.
- Forget the current Wifi, reset the router and connect to the Wifi again.
Q6. The storage space of the tablet is not enough.
- Delete the Apps you don’t use.
- Clear the cache of the Apps regularly.
- Install a memory card to expand the storage.
Q7. The screen is unresponsive.
- Check if the screen is dusty or greasy. If yes, please gently wipe the screen with a cloth to clean it.
- Insert the pin into the Reset Hole to power off the tablet, then power on the tablet to try again.
QB. The font size is too small to read.
- Please go to Settings> Display> Advanced> Font Size to adjust the text size.
Q9. Can the tablet support OTG function?
- Yes, but an extra OTG cable is required. You can connect the mouse or a USB drive through the cable then.

FCC Caution

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

FCC Radiation Exposure Statement: The device has been tested and comply with FCC SAR limits.

ISEDC Requirements:

This device complies with Innovation, Science, and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

this device may not cause interference, and
this device must accept any interference, including interference that may cause undesired operation of the device.

Caution RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS The symbol indicates DC voltage

RECYCLING – This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment. This product can be used across EU member states.This product can be used across EU member states. body. EU Compliance Statement: Shenzhen VanTop Technology & Innovation Co., Ltd. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of the Directive 2014/53/EU. A copy of the EU Declaration

Notes: