Oypla 4185 Wheelbarrow Planter User Manual
- June 6, 2024
- Oypla
Table of Contents
Oypla 4185 Wheelbarrow Planter User Manual
Safety Instructions
Notice: Ensure you read and fully understand instructions before use
While every attempt is made to ensure the highest degree of protection in all
equipment, we cannot guarantee freedom from injury. The user assumes all risk
of injury due to use. All merchandise is sold on this condition, which no
representative of the company can waive or change.
- Make sure all fastenings are tightly in place and that everything is in order before using the product. This should be checked periodically by an adult.
- This product is not a toy, and is only to be used for its designated purpose.
- Move to the final position before filling the planter.
- Only use this product on stable, level and dry ground.
- This is a garden planter, do not use as a wheelbarrow.
- Do not discard any of the packaging until you have checked that you have all of the parts and fittings required.
- This product is intended for outdoor use only.
- Leaving the product outside exposed to weather, especially direct sun and rain, will speed the weathering process. This can be slowed by removing the product from these conditions.
- This product contains small parts that could be a choking hazard if swallowed. Keep these items away from children.
- Use the correct fixings as indicated. Do not tighten any of the nuts until the unit is completely assembled, then finish by tightening all nuts. All nuts must be tightened before use.
- If the product is damaged or has any defects, please contact cservice@oypla.com
Assembly Instructions
If you are missing any of the below parts please contact
cservice@oypla.com
Please be aware that you will be referring to this parts list throughout the
assembly process.
Parts List:
Care and Maintenance
- Line the inside of the planter with polythene sheeting before filling. Ensure that a few holes are made in the sheeting for drainage.
- Preserve the wood using timber treatment. Follow the directions on the can after first checking that it is not harmful to plants.
- Insert the wheel halfway along the axle and insert wooden dowels either side of the wheel. Insert each side of the axle into the supports.
- Attach the body to the supports and secure using 4 screws.
- Attach the legs to the supports using 2 screws each.
- Attach the handles onto the supports using 2 screws on each side.
HAVE A QUESTION ABOUT YOUR PURCHASE?
OUR DEDICATED CUSTOMER SERVICES TEAM ARE HAPPY TO HELP
CONTACT THEM VIA:
TELEPHONE: 020 3600 2255
EMAIL: cservice@oypla.com
LIVE CHAT: www.oypla.com
PLEASE RETAIN A COPY OF THESE INSTRUCTIONS FOR FUTURE CONSULTATION
An Official OYPLA Branded Product Imported by Oypla.com LLP, Uxbridge, UB8 2FX
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>