WINSON ST-70 Industrial Wireless Barcode Scanner Instruction Manual
- June 6, 2024
- WINSON
Table of Contents
- Product Description
- Battery Install & Remove
- USB Connection Method
- Pairing Method
- Scanning Method & Scanning Distance
- Charging Method
- Use The Hook
- Use The Base
- How To Use The Wall Mounted **
- Indicator Light & Buzzer Status
- Common Problem
- Precautions
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Industrial Wireless Barcode Scanner Manual
List: Barcode scanner Base Battery Manual USB/RS232 cable 12V Adapter
Product Description
Barcode Scanner
Base cable plug
Cable insertion:
Connect the cable in the direction shown
in the picture| Unplug the cable:
Press the buckle first as shown in the picture, Then unplug the cable
---|---
Battery Install & Remove
USB Connection Method
- Connect the PC/POS with USB cable
- Connect the power adapter to the socket, and connect the power supply cable to the base
RS232 connection method
- Connect the PC/POS with RS-232 cable
- Connect the power adapter to the socket, and connect the power supply cable to the base
Pairing Method
-
Scan the pairing barcode which pasted on the front of the base
-
Put the scanner into the base and wait for the sound and light prompt for successful pairing
Scanning Method & Scanning Distance
-
Scanner aim at the center of the barcode It is better to maintain a certain angle between the barcode and the scanner(Aiming light is subject to actual product)
-
If the bar code is highly reflective, pls try rotate scanning at a certain angle instead of scanning vertically.
Charging Method
-
One battery: charge the scanner through the base
-
Two Batteries: Charge the battery and the scanner simultaneously through the charging base (Base need to connect with power supply cable)
Use The Hook
The metal hook on the top of the scanner can be used for hanging
Use The Base
Flat Mode
Wall-mounted mode
How To Use The Wall Mounted **
**
Indicator Light & Buzzer Status
Working Status (Barcode Scanner)| Indicator Light Prompt| Buzzer
Prompt
---|---|---
Power on| Green light on| Continuous beep
The scanner is in standby statu or the scanner is not powered| N| N
Waiting for pairing connection| Flashing state lasts for lOs| Intermittent
short beep lasts for lOs
Read Barcode Successfully| Green light flashes| A short beep
Barcode transmission completed| Green light flashes| A short beep
Transmission error or invalid data| Red light flashes| Report an error with a
long beep
Low battery alert status| Red light on| N
Transmission error
or invalid data| Red light flashes| Report an error with a long beep
Called status| Blue light flash| short beep 3 times long beep 1 time
Working status (base)| Base Indicator Light Prompt| Buzzer
Prompt
---|---|---
Base power on| N| Beep 4 times
The base has successfully connected with the scanner| Green light on| N
The base is disconnected
from the scanner| Green breathing light status| N
Data has
been transferred| Green light flashes| N
Information reset, transmission error, or invalid data| Red light on| N
Scanner is on charging| Yellow breathing light status| N
Call barcode scanner| Sky blue light flashes| N
Working status (backup battery compartment)| Battery charging
indicator prompt
---|---
The battery compartment is powered, or the battery
in the battery compartment is fully charged| Three battery indicator lights
are always on
The battery is charging| Battery Indicator flashes
Common Problem
Question 1: The scanner does not work
Answer: The scanner may be exhausted
Solution: Put the scanner into the base to charge or replace the battery
Question 2: The scanner does not upload data (there is any prompt of
successful barcode reading)
Answer: The reading of the corresponding barcode type is not enabled
Solution: Turn on the reading of the corresponding barcode type
Answer: The barcode is damaged, distorted, and deformed, resulting in
unreadable
Solution: Make sure the barcode is not damaged, twisted, or deformed
Answer: The distance between the scanner and the barcode is incorrect
Solution: move the scanner closer or away from the barcode
Question 3: The scanner does not upload data (there is a prompt of
successful barcode reading)
Answer: The host interface configuration is incorrect
Solution: scan the corresponding host interface parameter barcode to set
Answer: The scanner has not been paired with the base
Solution: follow the pairing method to pair with the base
Answer: beyond the effective transmission distance
Solution: Ensure that the scanner and the base are within the effective
communication distance
Answer: The cable is loose or damaged
Solution: Make sure that the cable has been connected and fixed. If you
still cannot upload data, please contact after-sale service.
Question 4: The data is incorrectly displayed on the host
Answer: The input method is incorrect
Solution: Use English input method
Answer: The host interface configuration is incorrect
Solution: scan the corresponding host interface parameter barcode for
setting
Answer: The zone configuration is incorrect
Solution: Choose the corresponding country/region and language coding
scheme
Precautions
- When you get the barcode scanner first time, the battery may not be fully charged Status, please use the charging base to fully charge before use
- Do not use aiming light or fill light to shoot people’s eyes directly during use
- Please use the original charger, do not change the base or adapter at will
- Please avoid metal objects (such as keys, etc.) from contacting battery electrodes or artificially short-circuiting battery electrodes
- Do not put the battery in an overheated, humid, or corrosive environment, and do not squeeze or bump
- If the battery is swollen, please replace it with a new one in time
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
This device may not cause harmful interference, and
This device must accept any interference received, including interference that
may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>