Winson ZE805-C2H6S Malodorous Gases Sensor Module User Manual
- May 15, 2024
- WINSON
Table of Contents
Winson ZE805-C2H6S Malodorous Gases Sensor Module
Product Usage Instructions
- Power Connection: Connect the module to the power supply following the pin definitions provided in Table 2.
- Data Output: Utilize the UART signal or analog voltage signal output for monitoring the detected malodorous gases concentration.
- Sampling Method Selection: Choose between natural diffusion or integrated pumping for gas sampling based on your application requirements.
- Environment: Ensure the module is used within the specified working environment conditions for accurate readings and longevity.
- Maintenance: Regularly calibrate and maintain the sensor module according to the user manual guidelines for optimal performance.
Frequently Asked Questions (FAQ)
-
Q: How do I calibrate the ZE805-C2H6S Malodorous Gases Sensor Module?
A: Calibration instructions can be found in the user manual. It typically involves exposing the sensor to a known concentration of malodorous gases and adjusting the readings to match the expected values. -
Q: Can I use this sensor module for outdoor gas monitoring applications?
A: Yes, the ZE805-C2H6S Malodorous Gases Sensor Module can be used in atmospheric environment monitoring instruments and outdoor gas monitoring due to its high stability and sensitivity. -
Q: What is the typical lifespan of this sensor module?
A: The lifespan can vary based on usage and maintenance, but with proper care and calibration, the module can provide reliable performance for an extended period.
Statement
This manual’s copyright belongs to Zhengzhou Winsen Electronics Technology Co., LTD. Without the written permission, any part of this manual shall not be copied, translated, stored in database or retrieval system, also can’t spread through electronic, copying, record ways.
Thanks for purchasing our product. In order to let customers use it better and
reduce the faults caused by misuse, please read the manual carefully and
operate it correctly in accordance with the instructions. If users disobey the
terms or remove, disassemble, change the components inside of the sensor, we
shall not be responsible for the loss. The specific such as color, appearance,
sizes &etc., please in kind prevail. We are devoting ourselves to products
development and technical innovation, so we reserve the right to improve the
products without notice. Please confirm it is the valid version before using
this manual. At the same time, users’ comments on optimized using way are
welcomed.
Please keep the manual properly, in order to get help if you have questions
during the usage in the Future.
Zhengzhou Winsen Electronics Technology CO., LTD
Description
ZE805-C2H6S Malodorous Gases Sensor Module uses high-precision electrochemical
sensors, specialized instrument amplifiers, high-precision processors, and
intelligent algorithms to convert the detected ammonia gas concentration into
recognizable digital signals, which are transmitted through serial ports.
Convenient for users to use and debug, shortening their design and development
cycle.
The module is equipped with sensors with good linearity, high precision, high
sensitivity, strong anti-interference ability, excellent repeatability and
stability, and combined with temperature and humidity compensation algorithms,
greatly improving the reliability of the module.
Characteristic
- Small size
- Dual signal output (UART signal, analog voltage signal)
- High stability, high anti-interference
- Temperature and humidity compensation
- Sampling method can be selected: natural diffusion or integrated pumping
Application
Mainly used in gas monitoring, Internet of Things, UAV, atmospheric
environment monitoring instrument, micro air quality monitoring station, toxic
gas detection and other fields.
Technical Data
| Model No. | ZE801-C2H6S |
|---|---|
| Detection Gas | dimethyl sulfide |
| Detection Range | 0-10ppm |
| Working voltage | DC 5±0.1V |
| Working Current | ≤10mA |
| Output Signal | UART(TTL Level 3.3 V), Analog signal(0-5V) |
| Accuracy | ≤±3% |
| Repeatability | ≤±3% |
| Response Time | T90≤30s |
| Preheat Time | 30s |
| Resolution | 0.001 ppm |
| Working Environment | Temperature: -20~50℃,Humidity:15%~ 93%RH No condensation |
| Storage Environment | Temperature: -20~60℃,Humidity:15%~ 75%RH No condensation |
| Dimension | Φ22mm * 30.5mm |
DIMENSION
Pin definition
| GND | Power Ground |
|---|---|
| VCC | Voltage supply |
| VO | Analog signal |
| RXD | Serial port input |
| TXD | Serial port output |
Note
- After long-term storage, the module needs to be energized for a longer time to achieve stability before use, and the module needs to be aged for at least 48 hours for the first time.
- Direct welding of the pins of the module is prohibited. The tube seat of the pins can be welded, and the size of the tube seat is shown in Figure 2.
- The module can not withstand excessive impact or vibration.
- Do not apply this module to the system involving personal safety.
- Do not install the module in a strong air convection environment.
- To determine whether the module communication is normal, it is recommended to use the USB to TTL tool (communication level 3.3V), observe and judge according to the communication protocol through the serial debugging assistant software.
Zhengzhou Winsen Electronics Technology Co., Ltd
Add: No.299, Jinsuo Road, National Hi-Tech Zone, Zhengzhou 450001 China
Tel: +86-371-67169097/67169670
Fax: +86-371-60932988
E-mail: sales@winsensor.com
Website: www.winsen-sensor.com
Tel: 86-371-67169097/67169670
Fax: 86-371-60932988
Email: sales@winsensor.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>