GIGABYTE 12WE6-MAPLER-10AR Motherboard Installation Guide
- June 6, 2024
- Gigabyte
Table of Contents
GIGABYTE 12WE6-MAPLER-10AR Motherboard Installation Guide
Product Specification
(Note 1) Actual resolutions supported are dependent on the graphics card being
used.
(Note 2) Due to hardware limitations, the DisplayPort connector, Thunderbolt ™
4 connector 1, and Thunderbolt ™ 4 connector 2 require signal input from
external devices and support up to two display outputs at a time.
Installing the GC-MAPLE RIDGE Add-in Card
(Note 2) Whether the connector is supported depends on the motherboard models.
- When connecting one DisplayPort monitor, please connect the Mini-DisplayPort cable to the DP IN 1 connector, then connect the monitor’s cable to the DisplayPort connector or Thunderbolt™ 4 connector 1.
- When connecting two DisplayPort monitors, please connect one of the Mini-DisplayPort cables to the DP IN 1 connector and connect the monitor’s cable to the DisplayPort connector or Thunderbolt™ 4 connector 1. Then connect the other Mini-DisplayPort cable to the DP IN 2 connector and the monitor’s cable to Thunderbolt™ 4 connector 2.
Daisy-chaining Thunderbolt™ Enabled Devices
Installing the Driver
After the computer starts, install the driver for the GC-MAPLE RIDGE add-in card. Insert the included driver disc and follow the on-screen instructions to install the driver.
Please visit GIGABYTE’s global website (http://www.gigabyte.com) and click on Support & Downloads for the latest software driver.
Regulatory Notices
United States of America, Federal Communications Commission Statement
Supplier’s Declaration of Conformity 47 CFR § 2.1077 Compliance Information
Product Name: PCI Express add-on Card
Trade Name: GIGABYTE
Model Number: GC-MAPLE RIDGE
Responsible Party – U.S. Contact Information: G.B.T. Inc.
Address: 17358 Railroad street, City Of Industry, CA91748
Tel.: 1-626-854-9338
Internet contact information:
https://www.gigabyte.com
FCC Compliance Statement:
This device complies with Part 15 of the FCC Rules, Subpart B, Unintentional
Radiators.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with
manufacturer’s instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus set out in the Radio Interference Regulations
of the Canadian Department of Communications. This class B digital apparatus
complies with Canadian ICES-003.
European Union (EU) CE Declaration of Conformity
This device complies with the following directives: Electromagnetic
Compatibility Directive 2014/30/EU, Low-voltage Directive 2014 / 35 /EU, RoHS
directive (recast) 2011/65/EU & the 2015/863 Statement. This product has been
tested and found to comply with all essential requirements of the Directives.
European Union (EU) RoHS (recast) Directive 2011/65/EU & the European
Commission Delegated Directive (EU) 2015/863
Statement
GIGABYTE products have not intended to add and safe from hazardous substances (Cd, Pb, Hg, Cr+6, PBDE, PBB, DEHP, BBP, DBP and DIBP). The parts and components have been carefully selected to meet RoHS requirement. Moreover, we at GIGABYTE are continuing our efforts to develop products that do not use internationally banned toxic chemicals.
European Union (EU) Community Waste Electrical & Electronic Equipment
(WEEE) Directive Statement
GIGABYTE will fulfil the national laws as interpreted from the 2012/19/EU WEEE
(Waste Electrical and Electronic Equipment) (recast) directive. The WEEE
Directive specifies the treatment, collection, recycling and disposal of
electric and electronic devices and their components. Under the Directive,
used equipment must be marked, collected separately, and disposed of properly.
WEEE Symbol Statement
The symbol shown below is on the product or on its packaging, which indicates that this product must not be disposed of with other waste. Instead, the device should be taken to the waste collection centres for activation of the treatment, collection, recycling and disposal procedure.
For more information about where you can drop off your waste equipment for recycling, please contact your local government office, your household waste disposal service or where you purchased the product for details of environmentally safe recycling
End of Life Directives-Recycling
The symbol shown below is on the product or on its packaging, which indicates
that this product must not be disposed of with other waste. Instead, the
device should be taken to the waste collection centres for activation of the
treatment, collection, recycling and disposal procedure.
China RoHS Compliance Statement
Environment-friendly use period
Contact Us
GIGA-BYTE TECHNOLOGY CO., LTD.
Address: No.6, Baoqiang Rd., Xindian Dist., New Taipei City 231, Taiwan
TEL: +886-2-8912-4000, FAX: +886-2-8912-4005
Tech. and Non-Tech. Support (Sales/Marketing) :
https://esupport.gigabyte.com
WEB address (English): https://www.gigabyte.com
WEB address (Chinese):
Copyright
© 2021 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved. The trademarks
mentioned in this manual are legally registered to their respective owners
Disclaimer
Information in this manual is protected by copyright laws and is the property
of GIGABYTE.
Changes to the specifications and features in this manual may be made by
GIGABYTE without prior notice.
No part of this manual may be reproduced, copied, translated, transmitted, or
published in any form or by any means without GIGABYTE’s prior written
permission.
For product-related information, check on our website at:
https://www.gigabyte.com