JET OPTO EVOLVE8 Rear Seat Entertainment User Manual

JET OPTO EVOLVE8 Rear Seat Entertainment

Important Notice

It is unlawful in most jurisdictions for a person to drive a motor vehicle which is equipped with a television viewer or screen that is located in the motor vehicle at any point forward of the back of the driver’s seat, or that is visible, directly or indirectly, to the driver while operating the vehicle. The monitors should never be installed where they will be visible, directly or indirectly, by the operator of the motor vehicle.

Safety Precaution

For safety reasons, do not allow children to unfasten safety belts to make any adjustments to the system. System adjustments can be accomplished using the remote control unit, while safety belts remain fastened. Enjoy your entertainment system but remember that safety of all passengers remains the number one priority. Direct eye contact from protruding HDMI cables may result in injury during an accident. To prevent eye injury, disconnect all HDMI cables when not in use.
Warnings

• Do not use any harsh solvents or chemicals when cleaning the unit.
• Do not use any abrasive cleaners that may scratch the screen. Use only a lightly dampened lint free cloth to wipe the screen if it is dirty.
• Do not put pressure on the screen.

Product Features

Display

• 720p screen resolution
•  Integrated Touch screen controller
• Integrated HDMI media port
• Integrated USB Type C charging and data
• Integrated SD Card Port
• Bluetooth Capable
• WiFi 2.5GHz/5GHz
• Integrated stereo headphone jack
• Operating Input Voltage
  • Low: 9VDC
  • Nominal: 12VDC
  • High: 16 VDC
• Operating Temperature
  • Low: -20C
  • Nominal: 25C
  • High: +70C

Caution
Be sure to run the vehicle engine while using the system. Using this system without running the engine can result in battery drain. To avoid the risk of battery drain, please remember to turn off the system when the vehicle is not in use. Do not touch the inner pins of the jacks on the front panel. Electrostatic discharge may cause permanent damage to the system.

Accessories

Remote

Both of your EVOLVE screens come with their own Remote. The remote is designed to help you make the most of EVOLVE. Use the arrow buttons to click through the options on the screen. Press HOME to return to the source menu or MUTE to silence the audio. You’ll find standard media controls like PLAY, FAST-FORWARD and REWIND.. To pair a remote, tap SETTINGS on the touchscreen, tap REMOTE, then PAIR A REMOTE CONTROL and follow the onscreen pairing instructions. The system will let you know when pairing is complete, or if you need to run the procedure again. If the remote ever stops working, try pairing it again.

**Display Port Description

**

Port

| ****

Name

| ****

DESCRIPTION

---|---|---
1| Audio Out| 3.5mm Audio Jack Output
2| USB Type C| USB Type-C Port (15W)
3| HDMI In| HDMI Input (Supports up to 1080p)
4| SD Card| SD Card Input

Remote Control Operation

Installing or Replacing the Battery

1. On the rear of the remote control, remove the battery cover.
2. Install two “AAA” batteries as shown.

The remote control is only designed to operate this device. It is not a universal remote control and will not operate any other device.

Warning/Caution on using batteries

• Always ensure that the battery is inserted with the positive and negative terminals in the correct direction as shown in the battery compartment.
• If the remote control fails to function, replace the battery before seeking repairs at the dealer.
• Keep batteries out of the reach of children. Should the battery be swallowed, immediately consult a doctor. When disposing of used batteries, please comply with governmental regulations or environmental public institution rules that apply in your country/area.
• Remove the battery if the remote control is not used for a month or longer to avoid corrosion and damage to the remote control.

Screen 1

1. Cobranded Animated Boot
2. Remote pairing : Screen 1
3. Continue or Video Demo
4. Connecting to Car Network
5. Software Updates
6. Account Sign-in / Sign Up sell
7. PCON
8. Prime Up-
9. Content Wizard
10. Loading Home

Global Remote / Touch

Back & Power

1. Screen using remote…
   No HUD Peek is shown when the customer is interacting with remote. Remote screens will show focus states of buttons, touch mode will remove focus and follow global touch / remote behavior

2. Screen is touched (back disabled)…
   HUD Peek appears on screen when the customer touches the screen. It remains on screen while touching and will dismiss after 3 seconds (configurable) of no touch interaction. The only available buttons are ‘power’ (Screen off audio off) and ‘back’ all other buttons will be disabled state. Back will be disabled if not available in a screen… follows same remote back behavior.

3. Screen is touched (back enabled)…
   Showing the soft remote touch affordance the same way in OOBE as the rest of the experience will help to build muscle memory and expectations throughout the experience. This does not actually have to leverage the same tech as long as it has the same appearance and behavior.

Boot Screen

Partner background image (unique to car brand make and model) Partner logo (white logo unique to car brand make and model highest level least number of brands as these will be stored and need to be available before connection)

Fire TV Logo white logo no ‘edition’ Animation (Logos animate in together to the line and then a shine goes across both logos as sign of life while booting)

**Loading Language

**

Remote Pairing

• Pair remote 1 only: The device will be listening for pairing from the start, but the remote will not go into pairing mode until the customer explicitly acts on the button long press home.
  If skipped the customer will not be able to use the remote in OOBE, they will need to use touch and will need to pair after through settings

• Option for customer to troubleshoot remote or continue without pairing

Continue / Demo

1. A CONTINUE / WATCH DEMO: CONTINUE FOCUS Complete remote pairing or skip…
   • Continue is in focus by default
   • Cobranded screen with partner logo and Fire TV
2. A CONTINUE / WATCH DEMO: WATCH DEMO FOCUS D-Pads down…
3. A DEMO VIDEO Select watch demo touch or remote…
   • The video will be capable of being specific to the car model and manufacturer.
   • Uses media player play pause and duration
   • Video is available offline before connection to car wifi

**Connecting to Network

**

1. CONNECTING TO CAR NETWORK Continue from continue/demo screen…
2. CONNECTION SUCCESSFUL Connect successfully to car network…
3. NETWORK SELECTION Auto connection to car network failed…  Customer can select a brought in hotspot if the car wifi fails to connect.

**Software Update

**

• Complete network connection… Checking if there are any new updates.
• Update found… During the day 0 update power needs to remain on, customer should not turn off vehicle.

**Account Sign In

**

1. SIGN IN OR SIGN UPAfter update is complete…
2. SIGN IN Select already have an account…
3. SIGN UP Select new to Amazon…

1. SIGN IN MOBILE ENTER EMAIL & PASS W21O RD  Sign in via mobile going to URL…
2. ENTER ACTIVATION CODE  Add email address & password…
3. ACTIVATION CODE ENTERED Authenticates car to amazon account and will sign in to all screens

1. ENTER EMAIL Tap for ‘on TV Setup’ / select menu button …
2. ENTER PASSWORD Entered Email address…

Account Sign In

1. SIGN UP MOBILE ENTER EMAIL & PASSWORD Sign up via mobile going to URL…

2. ENTER ACTIVATION CODE Add email address & password…

3. ACTIVATION CODE ADDED Enter activation code…

4. REGISTERING FIRE TV Successful Activation…

5. ACCOUNT CONFIRMATION Account registered…

PCON

• Enable parental controls (adds pin code to select content, purchasing ,and settings)
• No parental controls (allows purchasing and video playback without pin)

Prime Up-sell

• Sign up to Prime (default focus)
• Change Plans (touch or remote select)
• No Thanks (touch or remote select to proceed to next screen)

Refer to app spec for additional details

Content Wizard

1. 9.1 CHOOSE APPS?  After PCON and Prime Up-sell…
2. 9.2 POPULAR SERVICES    Choose Apps…
3. 9.3 TV SERVICES D-Pad Right or Tap Live…

Note: For ROW regions where apps are not available, content wizard will not appear at all in OOBE.

Content Wizard

1. SPORTS APPS D-Pad Right or Tap Live…
2. FEATURED APPS D-Pad Right or Tap Live…
3. LOADING HOME EXPERIENCE Press Play/Pause on the remote or tap button…

On first launch after OOBE, the first row on home will be “your apps and channels” as there is no recent content

Overview: Screen 2

1. Cobranded Animated
2. Hold Screen for Screen 1
3. Screen 2 remote pairing
4. Continue or Video Demo
5. PCON

Boot Hold

**Remote Pairing: Screen 2

**

Settings Remote/Touch

1. Home Touch screen on home…
2. HUD OPEN  Bezel swipe from right to left or tap gear button on HUD Peek…
3. FULL SCREEN SETTINGS  Tap More Settings

Settings Remote/Touch

1. PREFERENCES SETTINGS – TOP OF LIST Tap on Preferences Settings Node…
2. PREFERENCES SETTINGS – SCROLL Swipe up Preferences Settings List…
3. PRIVACY SETTINGS – TOP OF LIST Tap on Privacy Setting…

Note: Header will still scroll up after moving from first item in touch and remote behavior.

Settings Remote/Touch

1. PRIVACY SETTINGS – SCROLL Tap 3P App Usage Data Setting when not selected…
2. PRIVACY SETTINGS – SCROLL REMOTE Customer picks up the remote and presses any D-Pad direction…

Note:

• When the customer taps a toggle item by touch when it is not in the selected slot showing the description, it will take take action to change the state and advance the item to the selected slot to reveal the info.
• The selected item will become in focus on first D-Pad action with remote, second action will begin navigation. HUD Peek is removed.

Troubleshooting

Monitor does not power on.

| ****

•                      Verify the vehicle is in the ON/RUN or ACC position.

•                      Verify the battery is installed in the remote control and fresh.

•                      Verify the fuse located in-line is good.

Remote control does not function.| •                      Verify that the battery in the remote control is fresh.

•                      Verify that the remote sensor lens is not obstructed.

No picture.

| •                      Check that the signal source is connected.

•                      Check the menu source setting. Match your monitor mode with the source correctly.

No sound or distorted sound.

| •                      Make sure that the external media device is connected properly, and all cables are securely inserted into the appropriate jacks.

•                      Verify the volume is turned up on headphones.

•                      When placing the headphones on your head, make sure to observe the Left and Right orientation. The headphones must be oriented correctly

(facing forward) in order to receive the audio signal.

Monitor feels warm.

| •                      When the monitor is in use for a long period of time, the surface will be warm. This is normal.

A Parental Setting message is displayed, prohibiting movie

playback.

| ****

•                      Using the remote control, enter your 4-digit Parental Password and then press Enter. Refer to “Parental Controls” section for more details.

| •
|
|
|

Specifications

Sources

| USB Type-C, HDMI, SD, FireTV

I/O Ports

| ****

3.5mm Headphone Jack, USB port, HDMI, SD Card Port

Headphone (Audio Out)

| ****

Wired headphones (not included)

Video Display System| NTSC/PAL

HDMI Compliant

| ****

Version 1.4

Wireless Audio

| Dual channel digital audio transmitter, supports stereo headphone operation (reception: 0.9 m; 80°, 1.8 m; 50°)
|
|
|

Compliance Information

• FCC: Z3K-EVOLVE8
• IC: 9930A-EVOLVE8

FCC Notice

This device has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this device does cause unacceptable interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the device and receiver.
• Connect the device into an outlet on a circuit different from that to which the receiver is connected.
• Consult your dealer or an experienced radio/TV technician for help.

FCC Warning:
To assure continued FCC compliance, the user must use the provided grounded power supply cord and the shielded video interface cable with bonded ferrite cores. Also, any unauthorized change or modifications to this device would void the user’s authority to operate this device. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

ISED Notice:
This Class B digital apparatus complies with Canadian ICES-003. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

1.  this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired operation of the device.

• the device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
• for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit;
• for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate; and
• the worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth in Section 6.2.2(3) shall be clearly indicated.

This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Cet équipement est conforme aux limites d’exposition aux rayonnements IC RSS-102 définies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec une distance minimale de 20 cm entre le radiateur et votre corps.

Compliance Information

WEEE Notice
Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that device shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this device is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this device. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this device, please contact your local city office, your household waste disposal service or the shop where you purchased the device. Applicable accessory: remote control. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. And any use of such marks is under license. Other trademarks and trade names are those of their respective.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>