Cobra 19 MINI Ultra Compact Recreational CB Radio User Guide
- June 6, 2024
- Cobra
Table of Contents
19 MINI
ULTRA COMPACT RECREATIONAL CB RADIO
QUICK START GUIDE
Thank you for purchasing the
Cobra 19 MINI CB Radio
The 19 MINI is an ultra-compact recreational CB radio that can be mounted
virtually anywhere inside your vehicle. Providing clear communication with 40
channels and a full 4 Watts of RF output power, VOX hands-free usage, and
adjustable receiver sensitivity, it’s perfect for road trips, offroading,
Overlanding, or simply keeping in touch with others
while in your vehicle.
For a full explanation of 19 Mini features, please download the manual at:
cobra.com/manuals
Cobra” and the snake design are registered trademarks of Cobra Electronics
Corporation, USA
Cobra Electronics Corporation jg a trademark of Cobra Electronics Corporation,
USA
Other trademarks a0d trade names are those of their respective 0wer’S
19 MINI Features
A. CH 9/19 Button
B. Squelch Control Button
c. Menu/Lock Button
D. POWER On/Off and Volume Control
E. LCD Display| r Microphone Jack
G. External Speaker Jack
H. Antenna Jack
I. Push-To-Talk (PTT
J. Channel Up/Down Buttons
---|---
Operating the 19 MINI
Power the Radio On and Off
- To turn on your radio, press and release the POWER button and the radio will emit a prompt and the LCD display wil turn on
- To power off the radio, press and hold the POWER button until the LCD display turns off
Volume Control
Turn the POWER button to adjust the volume: clockwise to increase volume,
counter-clockwise to decrease the volume
Channel Control
- With your radio turned on, press and release the POWER button to enter a channel selection. The channel number will blink on the LCD display
- Turn the POWER button to adjust the channel. Clockwise to increase the channel number, counter-clockwise to decrease
- Press and release the POWER button to select the desired channel and exit. The channel number will stop blinking
NOTE: Channels can also be manually changed using the UP or ON button
controls on the microphone. Holding the UP or DN button will allow rapid
channel changing
The maximum gain supported 5 dBi
Squelch Control (34 Levels Available)
You can manually adjust the squelch level from 1-34 or set the level to Auto
Squelch. Auto Squelch (ASQ) measures the noise of incoming signals to block
out noisy signals. There are 9 levels of Auto Squelch to set the threshold for
what incoming signals wil break squelch and be received on the CB
- To adjust the squelch level, press and release the SQ/ASQ button SL -08. 08 indicates the squelch level
- Turn the POWER button or press the microphone UP or ON button to change the squelch level NOTE: using the UP or ON buttons on the microphone changes the squelch levels rapidly
- Press and release the SQ/ASQ button again or wait 5 seconds to store the selected squelch level and exit
NOTE: The higher the number, the stronger an incoming signal needs to be
to break squelch and be received on the CB
ASQ Control (01 – 09 Levels Available)
You can manually adjust the squelch level from 1-34 or set the level to Auto
Squelch
-
Press and hold the SQ/ASQ key until LCD displays RR Q -06.D6 indicates the AS level. The higher the number, the stronger an incoming signal needs to be to break squelch and be received on the CB
-
Turn the POWER button or press the microphone UP or ON button to change AS level
NOTE: Using the UP or DN buttons on the microphone changes the squelch levels rapidly -
Press and release the SQ/AS key again or wait 5 seconds to store the selected ASQ level and exit
Operating the 19 MINI Continued
Install External Speaker
Choose an 8 Ohm external speaker with a 3.5mm mono connector.
WARNING: The 19 Mini external speaker output is a Bridge Tied Load (BTL)
design. Do not short the speaker wires to the ground as it may damage the
speaker amplifier.
Keypad Lock
- Press and hold the MENU key for 3 seconds to lock the keys. The LCD display will show the icon.
- When the keypad is locked, press and hold the MENU key for 3 seconds to unlock the keys. The icon turns off.
Emergency Channel 9/19
- Press and release the 9/19 button to choose CH9.
- Press and release the 9/19 button again to choose CH19.
- Press and release the 9/19 button a third time to return to your original channel selection.
vox
- Press and hold the PTT switch on the microphone.
- Press and release the MENU button to activate or deactivate the VOX function is displayed on the LCD display when VOX is active.
Menu Options
- Press and release the MENU button to enter the menu list.
- Turn the POWER button or press the microphone UP or ON button to choose the desired function.
- Press and release the POWER button to enter the setting for the desired function. Once selected, the setting will blink on the LCD display.
- Turn the POWER button or press the microphone UP or ON button to select the desired setting.
- Press and release the POWER button to confirm the setting and exit.
- To exit the menu, press and hold the POWER button or press and hold the microphone PTT switch or wait 10 seconds once the setting selection has been confirmed.
Reset to Factory Default
- Press and hold the MENU button to enter the menu list.
- Turn the POWER button or press the microphone UP or ON button to choose the RESET setting.
- Press and release the POWER button to select. RESET will blink in the display.
- Press and hold the POWER button until RESET stops blinking.
- Release the POWER button and the radio will automatically reset to factory default settings.
Menu Options Continued
LCD Display | Function | Setting |
---|---|---|
KB BP | Beep | on (default): turn on beep oF turn off the beep |
ROG 8P | Roger Beep Sound Setting | oF, Tone settings 01 – 06 oF: (default) turn |
off
roger beep
(Tones)
VOX L| VOX Sensitivity Level Selling| Level: 01 – 09 Default: 03
VOX T| VOX Delay Time Setting| Level: 01 – 09 Default: 01
RF.GAIN| RF Gain Control| Levels: 03, 06, 09 – 48 oF (default) RF gain off
TOTS| Time Out Timer| oF, 01 -10 minutes Default: 05
PUERTO| Automatic Power On Setting| on (default): Auto power on oF: Manual
power on
FLI VER| Firmware Version| Displays 2-digit Firmware Version
RESET| See Reset to Factory Default Section|
CB Radios
Important Product Information
FCC Part 15.19 Warning Statement
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO
THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
FCC Part 15.21 Warning Statement-
NOTE: THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT
EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE. SUCH MODIFICATIONS
COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
FCC Part 15.105(b) Warning Statement
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
IC RSS-GEN, Sec 8.4 Warning Statement
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
IC RSS-GEN, Sec 8.3 Warning Statement
This radio transmitter 19MINICB has been approved by Industry Canada to
operate with the antenna types listed below with the maximum permissible gain
and required antenna impedance for each antenna type indicated. Antenna types
not included in this list, having a gain greater than the maximum gain
indicated for that type, are strictly prohibited for use with this device.
External Antenna Maximum
Antenna Gain: 5dBi
Antenna Impedance: 50 Ohms
RF Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 63.8 cm between the radiator & your body. (Used in the
USA) The device is in compliance with RF exposure guidelines, users can obtain
Canadian information on RF exposure and compliance. The minimum distance from
the body to use the device is 76.5 (Used in Canada) cm.
Warranty Terms:
Cobra warrants your product against all defects in materials and workmanship
for a period of one (1) year from the date of original purchase. Cobra, at our
sole discretion, will repair or replace your product (with the same or
comparable product) free of charge. Cobra will not pay the shipping charges
that you incur for sending your product to us.
Products received COD will be refused. To make a warranty claim, we will
require proof of purchase in the form of an invoice or receipt. No proof of
purchase is required for factory direct purchases.
Warranty Exclusions:
Warranty does not apply to your product under any of the following conditions:
- The serial number has been removed or modified. 2. Your product has been
subjected to misuse or damage (including water damage, physical abuse, and/or
improper installation). 3. Your product has been modified in any way. 4. Your
receipt or
proof-of-purchase is from a non-authorized dealer or internet auction site including E-bay, U-bid, or other non-authorized resellers.
LIMITATION OF WARRANTY:
EXCEPT AS EXPRESSLY PROVIDED HEREIN, YOU ARE ACQUIRING THE PRODUCT “AS IS” AND “WHERE-IS”, WITHOUT REPRESENTATION OR WARRANTY. COBRA SPECIFICALLY DISCLAIMS ANY REPRESENTATION OR WARRANTY INCLUDING, BUT NOT LIMITED TO THOSE CONCERNING THE MERCHANTABILITY AND SUITABILITY OF THE PRODUCT FOR A PARTICULAR PURPOSE. COBRA SHALL NOT BE LIABLE FOR CONSEQUENTIAL, SPECIAL OR INCIDENTAL DAMAGES INCLUDING, ITHOUT LIMITATION, DAMAGES ARISING OUT OF THE USE, MISUSE, OR MOUNTING OF THE PRODUCT.
The above limitations or exclusions shall be limited to the extent they violate the laws of any particular state. Cobra is not responsible for products lost in shipment between the
owner and our service center.
General Warranty Information
Each product we manufacture is covered by our factory warranty. While each product may have unique components and policies, the general guideline below will apply to most obra products.
All Cobra products purchased factory-direct or from our Authorized Resellers will come with a full one to three (1-3) year warranty from the date of the original retail purchase (see policy statement above for full warranty details and exclusions). Standard accessories packaged with each model will have a one-year factory warranty. Accessory items have a one-year factory warranty. Shipping to our facility is not covered in our warranty. Return shipping is included within the US. This warranty is non-transferrable. For the sake of clarity, ‘repair or replace the Product or its defective part’ does not include removal or installation work, costs or expenses which include but are not limited to labor costs or expenses. Cobra will not be responsible for lost packages.
Product Service
If you have any questions about operation or installing your new Cobra
product, PLEASE CONTACT COBRA FIRST … do not return this product to any retail
store. The contact information for Cobra will vary depending on the country in
which you purchased and utilize the product. For the latest contact
information, please go to
www.cobra.com/support
For products purchased in the U.S.A., you may
call800-543-1608.
For products purchased in the U.S.A., if your product should require factory
service, please please go to
www.cobra.com/support and follow the
instructions for returning your
product to the Cobra Factory Service Department for service. Should there be
any problems with this product or further information is needed on its
features please visit www.cobra.com for support,
frequently asked questions,
Declarations of Conformity, and full manuals.
For Products Purchased Outside the U.S.A. or Canada
Please contact your local dealer for product service information.
Disposal of Old Electrical or Electronic Equipment
This product may contain hazardous substances that impact health and the
environment if not disposed of properly.
The crossed-out wheeled bin symbol indicates that the product should not be
disposed of along with the household waste. It should be handed over to an
applicable collection point for the recycling of electrical equipment. By
ensuring that this product is disposed of correctly you will help/prevent
potential negative impacts on the environment.
If you need more information on the collection, reuse, and recycling systems,
please contact your local civic office or the shop where it was originally
purchased.
Cobra® and the snake design are registered trademarks of Cobra Electronics
Corporation, USA.
Cobra Electronics Corporation™ is a trademark of Cobra Electronics
Corporation, USA.
Customer Assistance
Should you encounter any problems with this product, or not understand its
many features, please refer to this owner’s manual. If you require further
assistance after reading this manual, Cobra Electronics offers the following
customer assistance services:
Monday-Friday 9:00 AM- 5:00 PM EST
Call: 800-543-1608
SERVICE
Monday-Thursday 9:00 AM-5:00 PM EST
Call: 800-543-1608
Have questions? We can help. Contact us
at800-543-1608
M-F 9:00 AM-5 PM EST
For Assistance Outside the U.S.A.
Contact Your Local Dealer
Documents / Resources
|
Cobra 19 MINI Ultra Compact Recreational CB
Radio
[pdf] User Guide
19MINI, BBO19MINI, 19 MINI Ultra Compact Recreational CB Radio, Ultra Compact
Recreational CB Radio
---|---
|
Cobra 19 Mini Ultra Compact Recreational CB
Radio
[pdf] User Guide
19 Mini, Ultra Compact Recreational CB Radio, 19 Mini Ultra Compact
Recreational CB Radio
|
Cobra 19 Mini Ultra Compact Recreational CB
Radio
[pdf] User Guide
19 Mini Ultra Compact Recreational CB Radio, 19 Mini, Ultra Compact
Recreational CB Radio, Compact Recreational CB Radio, Recreational CB Radio,
CB Radio, Radio
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>