VAJESTIC MIC 800W UHF Headset Microphone User Manual

VAJESTIC MIC 800W UHF Headset Microphone

Please read the following instruction manual carefully before using the appliance and keep it for future use.

Warnings

•  Do not bend or cut the antenna on the receiver.
•  Do not cover the bottom of the microphone where the antenna is positioned to  avoid transmission problems.
•  Do not place or hold the microphone too close to the receiver and external speaker to avoid noise / hiss.
•  Remove the batteries if the microphone is not used for long time.
• In case of problems, do not disassemble the product but contact an authorized service center only (the complete list is available on the website
  www.newmajestic.com).

GIFT BOX CONTENT

• Transmitter x 1
• Receiver x 1
• Micro USB cable x 1
• Headset microphone x 1
• Warranty card x1
• User Manual x 1

Parts description

1.  Low battery indicator: when the battery is low the charging indicator is red. When the battery has enough charge or if the receiver is fully charged, the charging
   indicator is blue.

2. Power key: short press to turn the receiver on / off.

3.  MicroUSB charging input: connect a microUSB cable and a 5V 1A power adapter (not supplied) to charge the receiver.

4.  RF/AF indicator: Shows the connection between the receiver and the microphone/s. When receiver and transmitter are connected the indicator is blue.
   When the receiver detects an incoming audio signal the LED flashes green.

5. Charging status: when charging, LED is red, when fully charged LED is green.

1. MIC: input for connecting the microphone

2. Power key: press to turn the microphone on / off.

3. Antenna

4.  MicroUSB charging input: connect the microUSB cable and a 5V 1A power adapter (not supplied) to charge the transmitter. The charge LED, located
   under the microUSB connector, is red during charging and becomes green when charging is complete.

5. Volume -: press to decrease volume

6. Volume +: press to increase the volume. Shortly press Volume- and Volume + simultaneously to change the operating frequency (each press adds 0.5Mhz).

7. LCD Display: It shows the transmitter battery charge status, the frequency in use and the volume level set.

Check connection between receiver and transmitter

Turn on the receiver and the transmitter. When receiver and transmitter are both connected together, the “RF/AF” LED on the receiver is blue. When the receiver
detects an incoming audio signal the LED turns green.
In case that the transmitter is not paired with the receiver, it is possible to re-pair by following the procedure indicated:

• turn off the receiver and turn on the transmitter.
•  keep pressed the transmitter POWER, Volume – and Volume + buttons simultaneously until the microphone screen starts flashing.
•  turn on the receiver: the RF/AF indicator will briefly flash. At the end of the flashes, turn the transmitter off then on again.

Changing the operating frequency

• The microphones work at a frequency between 627.3-642.8MHz (in total 32 frequencies).
• In order to avoid interference with other devices (which can cause noise or shorten  the operating distance) , the product can change the operating frequency by briefly
• pressing the Volume – and Volume + buttons. The receiver will automatically pair to the best transmitter frequency.

Information on use

• Insert and screw the microphone connector into the right input on the transmitter.
• Make sure that the equipment to which you want to connect the receiver is equipped with a 6.35mm microphone input.
• Adjust the microphone volume to a minimum to avoid noises due to the triggering of the receiver in the equipment.
• Insert the receiver into the MIC input of the equipment.
• Turn on the transmitter and the receiver. When the RF/AF LED on the receiver is on, the receiver and transmitter are paired and can be used.
• Adjust volume to desired level.
• In case of interference, change the operating frequency (see previous chapter).

Technical Specifications

MINI WIRELESS RECEIVER (METAL)

MICROPHONE TRANSMITTER

battery)
Size:| 70x55x15mm
Weight| 57gr (without battery)

INFORMATION TO USERS OF DOMESTIC EQUIPMENTS

Pursuant to Art. 25, Paragraph 1 of the Legislative Act N. 49 14th March 2014,
“Implement of the Directives 2011/65 / EU and 2012/19 / EU concerning the reduction of the use of hazardous substances in electrical and electronic equipment, as well as waste disposal”.

The crossed bin symbol on the appliance or on its packaging indicates that the product at the end of its useful life must be collected separately from other waste. The user must, therefore, dispose the equipment at the end of its life to the appropriate electronic and electro technical waste centers, or return it to the retailer at the time of purchase of a new type of equivalent equipment, one by one.

Appropriate separate disposal for the subsequent start-up of the disused equipment for recycling, treatment and compatible environmental disposal helps to avoid possible negative effects on the environment and health and favors the re-use and / or recycling of the materials it is composed the equipment.

The illegal disposal of the product by the user involves the application of the penalties referred to in current laws.
Any rechargeable batteries or rechargeable batteries contained in the device must be disposed separately in the appropriate expired batteries bins.

Battery disposal

Disposal of expired batteries must take place at the appropriate recycling centers or according to local authority. Batteries in compliance with the 2013/56/EC directive.
Eco-contributo RAEE assolto ove dovuto – N° Registro AEE: It08020000001647
Eco-contributo PILE assolto ove dovuto – N° Registro PILE: IT19070P00005533
www.newmajestic.com

References

• Built.in
• New Majestic

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>