Trotty Pump Telestar-Digital User Manual

: October 27, 2023
: TELESTAR

Trotty Pump Telestar-Digital

TALESTAR

User Manual

www.telestar.de

Portable tire inflator

Thank you for purchasing the TELESTAR TROTTY PUMP. Please
read this user manual carefully before using this product and
keep it for future reference

1. Scope of delivery

1x TELESTAR TROTTY PUMP
1x Flexible hose (US standard connector)
1x French standard adapter
1x Ball needle
1x Nozzle for swimming ring
1x USB typ c charging cable

2. Technical data

Product typ: portable smart air pump
Model: TELESTAR TROTTY PUMP
Dimensions and weight: 40 x 40 x 188mm, 365g
Inflation pressure: 120 PSI/8 BAR
No-load flow: 20l/min
Charging temperature: 0 – 45°C
Working temperature: – 10 – 60°C
Battery capacity: 1200mAh/7.4V
Charging input: DC 5V/2A
Charging time: 2.5 – 4 hours
Pressure accuracy: +/- 1PSI
LED lighting: 0.5W
Over-current protection: 9A/1S
Over-discharge protection: 6V

3. Illustration

4. ATTENTION

Please do not leave the device unattended during operation.
Keep away from combustible, inflammable and explosive material.
Avoid from moisture and dust.
Please take care of a dry and clean storage
This device contains rechargeable batteries. Do not expose to
fire and do not dispose at random!
Keep the item out of reach of children.

5. How to use

5.1 Please fully charge the TELESTAR TROTTY PUMP‘s battery
prior to first use.

Please use the USB type C charging cable (included) to connect
the device to a DC 5V/2A charging adapter (standard smart
phone charger, not included). During the charging process, the
battery indicator flashes. If fully charged, the battery indicator is
permanently green-lit.
Please note: the TROTTY PUMP may not be used during charging operation.

5.2 Switch on/off

Switch on: press the on/off button and hold for 3 seconds. Wait
until the indicator in the upper display area is fully displayed.
The device is now ready to use.

Switch off: press the on/off button and hold for 3 seconds until
the display shows „off“.
Please note: The TROTTY PUMP automatically turns off after 3
minutes without operation or when battery level is low.

5.3 Mode selection

Press the mode select key (see chapter 3, (o)) in order to
switch modes. You may choose between 5 different modes:

5.4 Switch measure

Short press U/LED key (see chapter 3, m), to switch between
pressure measure units. The measure conversion formula is
shown below:
1 PSI = 6.89 KPA, 1 BAR = 100 KPA, 1 kg/cm2 = 98 KPA

5.5 Preset pressure value

Adjust the preset pressure value by using the keys +/- (see
chapter 3, p). Short press to adjust in 0.5PSI steps. Press and
hold the keys +/- (see chapter 3, p), to quickly adjust the
pressure value.
Note: The device automatically switches preset pressure values
according to the selected mode. The internal memory saves
individual adjustments, though. If the value in a certain mode is
changed, the new value will be saved.

5.6 Hose connection

The hose may be connected to the pump as shown below:

hose connection

5.7 Start inflation

Short press inflation key (see chapter 3, n), to start inflation.

The digital display shows the real-time pressure value during
inflation.
Attention: The compressor is really noisy during operation. The
hose heats up during inflation process and may not be touched
with bare hands.

5.8 Stop inflation

5.9 LED flashlight

Press and hold the U/LED key (see chapter 3, m), to switch the
LED flashlight on/off.

5.10 Measuring pressure

After switching on, please connect the compressor to the
devices to be inflated. The display will automatically show the
current pressure value.

5.11Clearing pressure value

After switching on, the pressure display may be reset by pressing
and holding the +/- key for 3 seconds, if the display shows
another value except „0“.

6. High temperature safety precautions

The connection between hose and compressor may develop
high temperatures during operation. Do not touch or unscrew
the hose immediately after using the compressor in order to
avoid risk of burn injury.

7. Common pressure values

Category	Type	Pressure value
Bycicle	Stroller

10-16“ bike
20-30“ bike
road bike| 18 – 30 PSI
30 – 45 PSI
38 – 55 PSI
90 – 120 PSI
Motorcycle
e-Scooter| Motorcycle
e-Scooter| 28 – 55 PSI
Car| Car| 2.2 – 2-8 BAR
Category| Type| Pressure value
---|---|---
Ball| Toy ball
Basketball
Football
Volleyball
Rugbyball| 3 – 6 PSI
7 – 9 PSI
10 – 12 PSI
4 – 6 PSI
10 – 14 PSI

8. CE note

Your device bears the CE marking and complies with all relevant
EU standards. TELESTAR-DIGITAL GmbH hereby declares that
this TELESTAR TROTTY PUMP complies with the
essential requirements and other relevant provisions
of EMC Directive. The declaration of conformity
for this product can be found at: www.
telestar.de

9. Service information

Our service area provides professional specialists to answer
queries. Here you can ask any questions regarding TELESTAR
products and receive tips for locating a possible fault. Our
technicians are available: Monday – Friday 8:00 to 16:45 under
following telephone number: 02676 / 95 20 101 or via e-mail
to: service@telestar.de
If the service hotline is unable to help you, send your device,
preferably in its original packaging, or at least packed securely
for transport, to following address:
TELESTAR – DIGITAL GmbH
Service Center
Am Weiher 14 (Industriegebiet)
56766 Ulmen

Digital user manual

For environmental reasons, the
hardcopy of this user manual is
bilingual (German and English).
A multilingual manual (German,
English, French, Dutch) is available
as digital PDF download.
It is accessible via this QR code: