AiXPI L218 10 Inch LED Ring Light Instruction Manual
- June 6, 2024
- AiXPI
Table of Contents
AiXPI L218 10 Inch LED Ring Light
Dear Customer:
Thank you for purchasing our products.
If you need any help, please feel free to contact us, at our email address:
support@aixpi.com We provide a 12-month warranty.
Thanks and best regards.
No battery! No charging!
- Please do not use a 5W iPhone charger to c harge ring light.
- Please choose reputably. certificate compliant de 5V adaptor. it is better to
- choose 12W or higher power adap tor to power the ring light. If the odap tor
- power is less than 12W. it may cause the ring light to cut off power due to automatic overheating protection.
Linking Method of Bluetooth Selfie Remote
Precautions for use
- No battery, No charging.
- Please do not use a 5w iPhone charger to charge the ring light
- Please choose reputably. certificate compliant de 5V adaptor. it is better to choose a 12W or higher power adaptor to power the ring light. If the adaptor power is less than 12W, it may cause the ring light to cut off power due to automatic overheating protection.
- The slight noise is unavoidable if you choose a power bank to drive the ring light
- Ta: 2o·c ~ so·c
- Please do not use the ring light in a damp environment. such as in the rain, in the bathroom, etc.
FCC Warning Statement
Changes 01 modifications not exp1essly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for o Closs 8 digital device. pursuant to Part 15 of the FCC Rules, l these limits are designed to p provide reasonable protection against harmful interference in a resid rental installation. !his equipment generates uses and can radiate radio frequency en1gy and, if not installed and used in accordance with the instructions, may cause harmful Interference to radio communications. However, there Is no guarantee that interference will not occur in o particular installation, If this equipment does cause harmful interference lo radio or television reception, which can be de”<: limited by turning the equipment off and on. the user is encouraged to try to correct the interference by one or mare of the fallowing measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the, equipment into an outlet on o circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/lV technician for help,