AIXPI L218A 10 Inch LED Ring Light User Manual

AIXPI L218A 10 Inch LED Ring Light

Product Information

The 10LED Ring Light is a versatile lighting accessory that provides bright, even illumination for various applications. It comes with a 12-month warranty and requires no battery or charging.

Dear Customer

• Thank you for purchasing our products.
• If you need any help, please feel free to contact us, our email address [email protected]
• We provide 12 month warranty.
• Thanks and best regards.

No battery! No charging!

• Please do not use 5W iPhone charger to charge ring light.
• Please choose reputable, certificate compliant dc 5V adaptor, it is better to choose 12W or higher power adaptor to power the ring light. If the adaptor power is less than 12W, it may cause the ring light to cut off power due to automatic overheating protection.

Precautions for use
No battery! No charging!

1. Please do not use 5W iPhone charger to charge ring light. Please choose reputable, certificate compliant dc 5V adaptor. it is better to choose 12W or higher power adaptor to power the ring light. If the adaptor power is less than 12W, it may cause the ring light to cut off power due to automatic overheating protection.
2. The slight noise is unavoidable if you choose power bank to drive the ring light.
3. Ta: -20℃ ～ 50℃
4. Please do not use the ring light in damp environment, such as in the rain, in the bathroom etc.

No battery! No charging!
Please do not use 5W iPhone charger to charge ring light.

• Please choose reputable, certificate compliant dc 5V adaptor, it is better to choose 12W or higher power adaptor to power the ring light. If the adaptor power is less than 12W, it may cause the ring light to cut off power due to automatic overheating protection.

Product List

Installation Instructions

1. Prepare Tripod, and turn the screw anticlockwise to loosen it.

2. Use both hands to divide the corner frame into two sides.

3. Tighten the screws to fix the tripod.

4. Pull out the holder first.

5. Then rotate the holder to fix it.

6. Adjust height according to demand. Tripod assembly completed.
   

7. Prepare 1/4″ Ball Head

8.  Install the Mobile Phone Clip on the 4 1/4″ Ball Head and tighten it as the arrow direction shows.

9. Loosen the screws at the bottom and leave some gaps for installation on the ring light.
   

10. Mount the assembled mobile phone holder on the ring of the Ring light.

11. Press the clamp with your fingers and rotate to tight.

12. Mobile phone bracket installation completed.
    

13. .Install the 3 1/4″ Ball Head on the ring light and rotate to tight.

14. Ball Head and Ring light assembly completed.

15. Install the mounted 1/4″ Ball Head on the tripod and rotate it tight.

Work as a selfie stick Tripod stand can be used as a selfie stick.

1. Turn the screw counterclockwise to loosen the screw.Unfold the tripod and rotate the selfie stick as shown.

2. Take out the selfie stick.

3. Install the 1/4″ Ball Head on
   

4. Install the Mobile phone clip on the 1/4″ Ball Head until tightened.

5. Put the cell phone on the cell 5 Mobile phone clip.

6. .Adjust the angle as show.
   

7. Pull out the holder first. Then rotate the holder to fix it.

8. The length can be adjusted as needed.

Linking Method of Bluetooth Selfie Remote

1. Turn on the Bluetooth selfie remote switch and the blue light flashes.
2. Open the device Settings→ Bluetooth, find “AB Shutter3” click on the link.
3. After the connection is successful, you can start using it.

USB Powered

Basic Operation

Color Temperature & 10 Brightness

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>