OAXIS FS1021 Sketch Book Portable Drawing Pad User Manual
- June 6, 2024
- OAXIS
Table of Contents
OAXIS FS1021 Sketch Book Portable Drawing
Pad PRODUCT VIEW
Device Pen
- Indicator
- Save button
- Power button
- Erase button
- Drawing area
- Micro USB port
- Reset hole
- Lock/Unlock
Pen
-
Pen tip
-
Indicator
Red Indicator: Charging
Red Indicator Turns Off: Fully charged -
Thicker stroke
-
Thinner stroke
-
Micro USB charging port
BEFORE USE
Charging the Device: While the device is charging, the indicator light
will flash red. Once fully charged, the indicator light will turn off.
Charging the Stylus Pen: While charging, the indicator light on the
stylus will flash red. The indicator light will switch off once the charge is
full.
App Download: Search “Sketch Book App” on the Google Play Store or Apple
App Store to download. Compatible with: Android 4.3 or above / iOS 9.0 or
above
USING THE DEVICE
Power ON/OFF
Press and hold the power button for 2 seconds to turn on the device. A green indicator light will appear, which means your SketchBook is ready to use. If the device is connected via USB, the light will appear ‘yellow’.
Sleep and Awaken
- Your device will go to sleep after 1 hour of inactivity and the indicator light will turn off.
- Press any key to awaken the device; the indicator light will also turn on.
- Although the device is not awake, you can still use it to write, but you cannot erase or save your drawing.
Erase Button
- Press the Erase button 2 times to erase the drawing on the screen.
- If using the SketchBook App’s real-time drawing functions on your phone, the drawing on the app will also be erased.
Save Button
- Press the Save button for 1 second until the indicator flashes red. Your drawing will be saved into the device memory and will disappear from the screen.
- When the device memory is full, the indicator light will flash red and green. Please use the Sketch Book App to retrieve your drawings from the device memory.
Charging
When the battery on your device becomes low, the indicator light will rapidly blink red. Turn off the device and connect the USB cable provided to the device’s charging port and the other end to a charging outlet. While the device is charging, the indicator light will flash red. Once fully charged, the indicator light will turn off.
USING THE STYLUS PEN
Sleep and Awaken: The stylus will enter sleep mode after 4 minutes of
inactivity. Draw using the stylus to re-activate.
Pen Stroke: You can adjust to a thinner or thicker stroke using the
dedicated button on your stylus. Adjust before using the stylus, as you cannot
change the stroke when in use. This stroke adjustment works when you using
sync with the app. Once you draw on the device, you are able to see the same
drawing on your phone. If you are changing the pen stroke, immediately you
will see a difference in your phone as you start to draw on the device.
Pen Charging: To charge your stylus, connect the USB to your pen’s
charging port and the other end to a charging outlet. While charging, the
indicator light on the stylus will flash red. It takes 1 hour to fully charge,
and at a point the indicator light will switch off. Each time before drawing
on the device, make sure the device is on as well as a battery in it. If the
pen doesn’t have a battery or the device is off, nothing will be recorded.
Just hold the pen as normal and bring the pen tip near to the drawing surface
while the device is on. You will see the indicator turns green and become
brighter. It means the device has detected the pen which has a battery in it.
Stylus Calibration
Calibration can be done if any image errors are found in the device.
- To ensure the stylus is working properly, use it to draw on the device.
- To enter calibration mode, press and hold the 3 buttons on the device simultaneously until the indicator light flashes red.
- Position the tip of the stylus about 2mm above the drawing surface.
- Once the indicator light switches from red to green and stays green, the calibration has been successful.
If the light doesn’t change from red to green but rapidly flashes red, the calibration was unsuccessful. Please try again by repeating steps 2 to 4.
Replace Pen Tip
- Hold the stylus with one hand and slowly pull the tip out manually.
- Select the desired tip from the set provided.
- Slowly push the new tip into the slot until it fits snugly.
USING THE APP
Connect and Retrieve
To get optimum usage from the device, please connect the device with the app.
- Turn on Bluetooth on your phone.
- Open the Sketch Book App, choose the device “Sketch Book”.
- Click ‘+’ and then select ‘Retrieve works’.
- The app will scan and connect the device automatically. And then retrieve any saved drawings on the device.
Real-time Drawing
Click ‘+’ and then select ‘Realtime drawing’.
Draw on the device as it synchronizes with the app’s drawing canvas.
FOR ONLINE HELP AND SUPPORT VISIT: https://support.oaxis.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>