ROHDE SCHWARZ R&S NRQ6 Frequency Selective Power Sensor Instruction Manual
- October 27, 2023
- ROHDE SCHWARZ
Table of Contents
ROHDE SCHWARZ R&S NRQ6 Frequency Selective Power Sensor
Frequency Selective Power Sensors Installation Instructions for Options
Installing the License Key
Use one of the following methods:
-
Entering the license key manually.
See “To install the license key” on page 2. -
Using an RSI file.
See “To install the license key” on page 2. -
Using remote control.
System: License:… commands; for details, see the user manual.
To install the license key
-
Make sure that the most recent firmware version is installed.
-
Open the web user interface.
-
In the navigation pane of the main dialog, select “System”.
-
Click “Enter License Key”.
The “Enter License Key” dialog is displayed. -
If you install the license key manually:
-
Under “License Key”, enter the license key from the software option list sup-plied with the option.
-
If you use an RSI file:
-
Copy the RSI file delivered with the option into a folder that you can access with your R&S NRQ6.
-
Click “Browse License File”.
-
Select the RSI file you want to install.
-
Click “Apply”.
-
Click “Reboot”.
The R&S NRQ6 performs a reboot. -
Check whether the option is active. The name of the option is displayed under “Installed Options”, for example “NRQ-K1”.
If you need further information on this or related topics, see the user manual of the R&S NRQ6.
- © 2018 Rohde & Schwarz GmbH & Co. KG
- Mühldorfstr. 15, 81671 München, Germany
- Phone: +49 89 41 29 – 0
- Fax: +49 89 41 29 12 164
- Email: [email protected]
- Internet: www.rohde-schwarz.com
- Subject to change – Data without tolerance limits is not binding.
- R&S® is a registered trademark of Rohde & Schwarz GmbH & Co. KG.
- Trade names are trademarks of the owners.
References
- SCHWARZ SUPPLY SOURCE - Custom Supply Chain Solutions
- Industry-leading technology group | Rohde & Schwarz