poly R30 USB Video Bar Instruction Manual

: June 6, 2024
: Poly

Table of Contents

poly R30 USB Video Bar
SAFETY AND REGULATORY NOTICES
Safety, Compliance, and Disposal Information
Installation Instructions
Industry Canada
FCC and Industry Canada Example Label
Getting Help and Copyright Information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

poly R30 USB Video Bar

SAFETY AND REGULATORY NOTICES

Poly Studio R30 USB Video Bar
This document covers Poly Studio R30 (Regulatory Model P032).

Service Agreements
Please contact your Polycom Authorized Reseller for information about service agreements applicable to your product.

Safety, Compliance, and Disposal Information

This equipment is intended for indoor use only.
Always disconnect the system from power before cleaning or servicing.
In order to remove all power from this unit, disconnect the power supply mains cord.
Do not spray liquids directly onto the system when cleaning. Always apply the liquid first to a static-free cloth.
Do not immerse the system in any liquids or place any liquids on it.
Do not disassemble this system. To maintain the warranty on the system, a qualified technician must perform service or repair work.
There are no user-serviceable parts inside this product.
This product is intended to be powered by an external (LPS) power supply – use only the type which is supplied with this product.
Do not use a power cord that is damaged. This could cause fire or electric shock. Contact the manufacturer for a replacement cord, if necessary.
Only use a power cord which is appropriately rated and approved relevant to the country of use.
This equipment is not intended to be operated by children.
When connecting to the mains supply, connect only to an earthed supply outlet which is installed near the equipment and is easily accessible.
Keep ventilation openings free from any obstructions.
The ambient operating temperature rating of this equipment is 0 – 40ºC and should not be exceeded.

Installation Instructions

Installation must be performed in accordance with all relevant national wiring rules.

Plug Acts as Disconnect Device
The socket-outlet to which this apparatus is connected must be installed near the equipment and must always be readily accessible.

Part 15 FCC Rules
This device is compliant with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference.
This device must accept any interferences received, including interference that may cause undesired operation.

Class B Digital Device or Peripheral
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Modifications
In accordance with Part 15 of the FCC Rules, the user is cautioned that any changes or modifications not expressly approved by Polycom, Inc. could void the user’s authority to operate the equipment.
Radiation Exposure Statement
The antenna used for this transmitter must be installed to provide a separation distance of at least 20 centimeters from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This device with its antenna complies with FCC’s RF radiation exposure limits set forth for an uncontrolled environment. To maintain compliance, this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Industry Canada

This device complies with RSS210 of the Industry Canada rules. Operation is subject to the two following conditions:

This device does not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.

The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
the device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;

FCC and Industry Canada Example Label

See an example of the Poly Studio R30 regulatory label below.
FCC ID: M72-P032
IC ID: 1849C-P032

poly R30 USB Video Bar-1

Japan VCCI
This device is only approved to transmit indoors within the W52 and W53 bands for Japan:

W52(5180MHz / 5200MHz / 5220MHz / 5240MHz)
W53(5260MHz / 5280MHz / 5300MHz / 5320MHz)

Operating Ambient Temperatures

Operating temperature: +32 to 104°F (0 to 40°C)
Relative humidity: 5% to 95%, noncondensing
Storage temperature: -40 to +160°F (-40 to +70°C)

Waste Electrical and Electronic Equipment (WEEE)
All Polycom products that fall within the scope of the EU WEEE Directive carry the crossed wheelie bin symbol which advises customers not to recycle electronic products in the domestic waste stream but to recycle them safely as e-waste.

Restriction of Hazardous Substances Directive (RoHS)
All Polycom products comply with the requirements of the EU RoHS Directive. Statements of compliance can be obtained by contacting TypeApproval@poly.com.

Polycom Take-Back
In addition to any mandated take-back requirement, Polycom offers free recycling of its branded products to business users. Detailed information is available at http://www.polycom.com/company/about-us/recycle-program.html.

Getting Help and Copyright Information

GETTING HELP
For more information about installing, configuring, and administering Poly products or services, go to Poly Online Support Center.
Poly
345 Encinal Street
Santa Cruz, California
95060
©2021 Poly. All other trademarks are the property of their respective owners.