aiwa BT227L Katan Z Portable Wireless Stereo Speaker User Manual

aiwa BT227L Katan Z Portable Wireless Stereo Speaker

Package Includes

• 1 xSpeaker
• 1 x Type-C charging cable
• 1 x AUX Cable(Ф3.5mm)
• 1 x UserManual

Overview of Speaker

Charging

1.Before first time use,fully charge the built-in battery.
2.Connect the Type-C Cable (included)between
•the DC IN port onthespeaker,and
•a USB port on a computer or USB ACAdapter.

Note: When the battery charge <3%，the speaker will power off automatically.

Power On
Press button until hear a rising tone and LED indicator lighton.

Power Off
Press button until hear a descending tone andLED indicator light off.

Bluetooth connection

Make sure that the speaker is within 10 meters from your mobile device,

1. Press button until hear a rising tone and LED indicator fast blinking white.
2. Go to the Bluetooth settings on your mobile device, search and select “AIWA KatanZ” from the list.
3. Once paired, the LEDindicator turns Whiteblue.

Note:

• When power on, the speaker automatically reconnects to the last mobile device it was connected to. (The speaker can memorize maximum of 8 paired devices).
• The speaker will automatically shut down after 10 minutes in pairing mode if no devices are paired for power saving.

Music Control
Play/Pause ClickVolume UP ClickVolume Down Click
NexttrackPress and Hold Previous track Press andHold
Switch Bluetooth mode/Auxinmode…………Click

Speakerphone(in Bluetooth Connection)
Answer an incoming call…………Click
Reject an incoming call…………Press and Hold End the current call……………Click
Redial last-called number ……Press and Hold

Bluetooth Disconnection
Press “ ”,“ ” buttons simultaneously until LED Indicator fast blinking White to disconnect the current connected device, and go into new Bluetooth-paring mode

TWS (True Wireless Stereo) Function
The TWS technology enables you to use two speakers pairing via Bluetooth to create a wireless dual-channel system to deliver true stereo sound effect.

TWS connection operation

1. Place the two speakers near each other (the distance should not be over 10meters).

2. Power on the two speakers, double click the button on one speaker as MASTER speaker (playback left channel ), the LED indicator fast blinking White
   then the two speaker will pair to each other automatically (The other speaker will be as SLAVE speaker and playback right channel)

3. Once paired, the MASTER speaker LED indicator slow flash White.

Disconnect the TWS connection
Press“ ”, “ ” button on one of the speaker simultaneously until LED Indicator fast blinking White to disconnect the TWS connection.

Listening music from external audio source

1. Power on the speaker.
2. Using the AUX Cable (φ3.5mm), connect your external device to AUX-in port on speaker.
3. It will automatically turn to AUX-in mode, the LED Indicator turns solid green.

Note: Under AUX-IN mode, skip songs and speakerphone function are not workable.

TF card reader (micro SD card)
Just simple insert your TF card into the port, the speaker can automatically turn to TF card reader mode, and play the MP3 music store in the card.
Music format: MP3, WAV,APE, FLAC, WMA

USB disk reader
insert your USB disk card into the port, the speaker can automatically turn to TF card reader mode, and play the MP3 music store in the card. Support
Music format: MP3, WAV,APE, FLAC, WMA

IPX5 Water-Resistant Feature
This Speaker is IPX5 Water-Resistant for rainfall, spills, or water jets, but do NOT submerge it in water or liquids.
IMPORTANT Note -To ensure the speaker is prepared to use for water- resistant,remove all the cable connec-tions and close the port protection cover tightly.

Reset the speaker: If the function buttons without working disconnect the charging cable, place a small pin(Φ<3mm) into the reset key and hold it for 2 seconds until the LED light off.

Specifications

• Bluetooth Version:5.0
• Support: A2DPV1.2;AVRCPV1.4, GAVDPV1.2; AVDTPV1.2;SPPV1.2;AVCTPV1.2
• Wireless work distance:10meters
• Rated Power:2x20W
• Driver Unit: 2 xφ133mm(4Ω,2x20W)
• Frequency response:90Hz－20KHz
• Signal-to-noise ratio:>75dB
• Battery type: Lithium-ion (5000mAh)
• DC input voltage/current: TYPE-C DC5V/2000MA
• Playtime: 6-8 hours (varies by volume level and content)
• Battery charge time: 3-4hours
• Dimensions:336136106mm
• Weight: 2032g

Caution

• Keep the speaker and its accessories away from the reach of kids as they might cause a choking hazard.
• Keep the speaker away from fire, water, liquids, extreme heat, and strong magnetic fields.
• Do NOT use this speaker at high volume for extended periods, as this may cause permanent hearing damage or loss.
• Do NOT drop or knock the speaker on hard surfaces.
• Do NOT use chemicals or detergents to clean the speaker
• Do NOT scrape the surface with sharp objects.
• Do NOT make unauthorized alterations to this product.

Troubleshooting

Cannot Power On
Charge the speaker and make sure it has enough battery

Cannot connect with the device

• Please check the following:
• The Bluetooth device supports A2DPprofile
• The Speaker is within 10m from the device.
• The Speaker is in pairing mode, the LED indicator blinking blue and red.

No Sound

• Make sure the music volume is at audible level on both your device and speaker.
• Make sure your device is successfully paired with the speaker, the LED indicator turn solid blue.

Poor sound quality
Move the device closer to this Speaker or remove any obstacle between them.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>