TIMEMORE Black Mirror 2 Coffee Scale Weighing Panel User Manual

: June 6, 2024
: TIMEMORE

Table of Contents

Package contents & functions
The Installation and Usage of Dripper Bracket
Introduction to Buttons and Display Area
The Display of Dual Coffee Weights
**Auto Timer Mode
Speciﬁcation
Smartphone App
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BLACK MIRROR 2

TIMEMORE BLACK MIRROR 2
COFFEE WEIGHING PANEL
User’ s Manual

Package contents & functions

The product needs to be installed before using. The components included in this package:

A Base×1
(including the connecting piece/screw)
B Bracket ×1
C Dripper Holder ×1
D Silicone Pad ×1
E TYPE-C Cable ×1| 1. Up/Down Adjustable Knob
(Use the large knob for adjustments)
2. Power Button
3. TYPE-C Charging Port
---|---

Please remove the protection pads as the picture in RED. The dripper bracket includes a dripper rod and a dripper holder for self-installing and dismantling. Detailed instructions are in the following section.

The Installation and Usage of Dripper Bracket

2. Loosen the large side knob to move the dripper holder freely to adaprt to different height combinations of the dripper and the coffee server.
After the height is adjusted to the proper height, the knob needs to be securely tightened.

|
---|---

3. When the dripper holder is locked, it can still rotate freely from the middle position to the left and right. Do not exceed the angle range.

Introduction to Buttons and Display Area

1. Power/Tare Button: Press to power on
Short press to tare
Long press 2 seconds to power off
2. Timer Button: Short press to start/pause timer
Press for 1 second to reset timer
Press for 5 seconds to turn on/off the beep
Quick press 8 times to turn on/off auto-timer mode
3. Time: Max recording time is 59m:59s
4. Flow Rate: The current speed of water injection| 5. Weight of Coffee: The weight of coffee after extraction
6. Weight of Total Water: Total water injection weight during extraction
7. Battery Indicator: Shows remaining power level
8. Connection Indicator： Shows if it is connected with Application
9. Sound Indicator
10. Auto Timer Indicator
---|---

PS: The sticker on the panel when shipped marks each function and description of each key. It can be removed after you are familiar with the operations.

The Display of Dual Coffee Weights

**Auto Timer Mode

**

The mode is based on ONLY regular mode which is when the device is NOT connected with App or Mini Program.

|
---|---
To turn on/off Auto Timer mode, press the timer button 8 times until you hear the beep. The letter A will appear on the display when the Auto Timer Mode is on.| Prepare brewing equipment and place on the scale. Add the coffee. Short press the timer button once. The display will count down 3, 2, 1.
|
---|---
The weight will go to zero. As you add water the scale will sense the weight and the timer will start timing your brew.| If the brewing equipment is removed from the scale the timer will stop and the display will show the time of the brew and the weight. If you place the brewing equipment back on the scale to add more water, short press the timer button to continue the timer and weighing functions. Short press the timer button again and the timer will stop. Long press the timer button to clear the display to start a new pour- over.

Speciﬁcation

Product Name: TIMEMORE BLACK MIRROR 2 Coffee Weighing Panel
Measure range: 0.5g-2000g
Storage temperature: -10 ℃ to 55 ℃
Use temperature: Surface -10 ℃ to 60 ℃ With silicone pad: -20 ℃ to 100 ℃
Key mode: Capacitive touch ( no need to press hard )
Assistive Indicator: built-in buzzer
Connection: 2.4GHZ Bluetooth wireless connection compatible for Bluetooth 4.2
Battery: Built-in 2300mAh Lithium lon rechargeable battery standard
Voltage: 3.7V Voltage range: 3.4V – 4.25V
Charge: 5V DC/1A with TYPE-C cable
Built-in Smart system to control battery charge. Adaptor is not included.
Type of adaptor: 220VAC / 110VAC Out put: 5V/1A
Smart device requirements: Android or iOS smartphone, install the latest version of Wechat app

Note

The battery does not support a fast-charging function.
It’s recommended to use 5V, 1a-2a adapter for charging.
Place the device on a horizontal and smooth surface.
It’s recommended to use the Silicone pad to protect the surface and internal parts of the product.
The device is powered by a lithium battery. DO NOT charge after the power is completely used up. It is recommended to charge the battery after every usage. If the battery is used up, there will be a protection time of 10 min during which you’ll not be able to use the device.
Do not use the device during charging.
When timer is off, it will be on standby for 3 min then shut down automatically. When timer is on, but there is no change in weight, it will shut down after 15 min.
The surface of scale is waterproof. DO NOT allow liquid to enter the gap between shells and charging port. DO NOT soak it in any liquid.
DO NOT attempt to dismantle or repair.
The limited warranty only covers any defect in material or workmanship under normal use during warranty period.
The device is an accessory for coffee brewing only. DO NOT use it for trade settlement or other occasions.

For full warranty coverage, the device must be used properly following the instructions provided by the manufacturer.

Smartphone App

Scan the below QR code and get into www.timemore.com – Download Center to download [TIMEMORE] application.

http://www.timemore.com/fuwuzhongxin/xiazaizhongxin/

After installation, please complete the registration or login account to learn more under [Brewing], [Data], [Device] interfaces.

2. Scan the QR code and get into Mini Program [TIMEMORE] via Wechat.

https://mp.weixin.qq.com/a/~ReeZQhBAzhIsUjH4CQkhnw~~

Please turn on the Bluetooth on the mobile phone to connect the device with Bluetooth according to the prompts in the Application or Mini Program.
Please make sure the device is not paired with other mobile phones.
The function, content and format of the App will be updated and improved periodically. Please pay attention to the latest product news.

BLACK MIRROR 2

Product name: TIMEMORE BLACK MIRROR 2 Coffee Weighing Panel
Item’s number ：TES008
Contents: Weighing Panel, Bracket, Dripper Holder, Silicone Pad, Charge Cable, User’s manual (Warranty Card), Certiﬁcation
Company : Shanghai TIMEMORE Coee Equipment CO., LTD.
Warranty: 1 year limited warranty
Website ：www.timemore.com
Tel ：400-684-0200
Manufacturer : Krell Precision (Yangzhou) CO., LTD.
ADD : No. 28 Xingyang Road, Development Zone, Yangzhou City, Jiangsu Province, China

FCC statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

this device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device must operate with a minimum distance of 5mm between the radiator and user body.