Shenzhen Three Bees E Commerce HM003 3-In-1 Wireless Charger Station User Manual

Shenzhen Three Bees E Commerce HM003 3-In-1 Wireless Charger Station

OVERVIEW

Packaging includes

1. Wireless charging stand
2. Type C wire
3. lnstructions
4. Service card

Device diagram

1. .Qi-Phones wireless charger
2. AirPads Pro wireless charger
3. Apple watch magnetic charger lnstallation positron
4. LED Indicator
5. Opening
6. Type-Cinterfuce

Use Wireless Charger

ORIGINAL Apple Watch Magnetic Charger (NOT INCLUDED) Installation Steps

1. Open the bottom shell please use the pry tool to open from the opening
2. Pass your Applewat.ch magnetic charger through the hole
3. Push the magnetic charger into the hole completely
4. Wrap the watch charging cable along the wire slot and plug it in LD the built-lnUSBport;
5. Buckle up the bottom shell

Wireless charging LED Light Mode

1. 1. Power in, the light blue light goos on for3 seconds, then turns deep blue and stays on
2. While charger the deep blue light turns green and stays on
3.  Charged fully, the green light will turn blue and stay on. Only for Samsung phones
4.  Working abnormal  the deep blue light keeps fleshing

Attentions

•  Please keep the charger away from water or ottier liquids
•  If ere are conducive materials (such as metal objects, magnets, credit
•  For better charging experience, we suggest you use a phone case of which the thickness should be within 3mm ro.12 inches). If the thickness exeeeds 5mm (0.19 inches). it will not charge properly.
•  The equipment can be used In the ambient temperature of 32 to 95
• Do not use the device in hospitals. airplanes or cars where radio interference probably occur.
• Do not disassemble. modify or repair the device

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>