Shenzhen Kangchen Electronic W7 Wireless Headset User Manual
- June 6, 2024
- Shenzhen Kangchen Electronic
Table of Contents
Shenzhen Kangchen Electronic W7 Wireless Headset
Headset Overview
**How to wear correctly
**
Please make sure the control buttons are on your left shoulder while wearing them, and please exchange the most suitable ear tips if they cannot stay in place.
Power On
Press and hold Multiple-Functional Button (Simplify “MFB” ) for 3 seconds
Power Off
Press and hold MFB for 4 seconds
Play/ Pause Music
After connection, Press MFB once to play and press once again to pause music.
Answer phone calls
Press the MFB once to pick up an incoming call.
Hang up phone calls
Press the MFB once again to hang up when you want to finish a phone call.
Reject hone calls
Long press the MFB for 1 sec to reject an incoming call.
Redial last calling number
Twice Press MFB quickly to redial the last phone number.
Turn up/ Tum down volume
Press the volume button •+• to tum volume up
Press the volume button •.• to tum volume down
Next / Previous song
Long press the volume button ·+· for 1 sec to go to next song.
Long press the volume button •. • for 1 sec to go to previous song.
Change Language
Under pairing mode (Means that do not connect with any devices after power
on), and twice press MFB to change language into English or Chinese
Reboot the headsets
If you cannot pair the headphones with your cell phone successfully, or
encounter any issues else, please go charge your headphones for 5 mins to
reset.
Note:
- Use and be the headphones at room temperature.
- Do not throw it away to avoid damage.
- Do not disassemble the headphones without a technician.
- Use DC 5V use a charger to charge the headphones to protect the battery.
- If the headphones cannot stay in your ears, please change a smaller ear tip or put on an ear hook
- To get more after-sale support, contact us at sypport®yywjss com
How To Pair
- Tum on the Bluetooth headphones, then the headphones will automatically enter pal~ng mode.
- Enabled your phone’s Bluetooth, find the headphones name ‘” NT”, then select and connect with it.
Note: If your phone la an Android phone, please allow our headphones to access to your phone audio and media audio ao that you can use our headphones normally.
How connect with two devices simultaneously
- Connect the headphones with your fist device. (Connection steps can follow above ·How to Pair” )
- After connected with the first device successfully, turn off the Bluetooth of the first device, then the W7 headphones will go back to pair mode.
- Enable the second device Bluetooth, then connect with the W7 headphones as well. (Connection steps can follow above ‘How to Pair” )
- After connect with the second device successfully, turn on the first device’s Bluetooth and select and connect with the W7 headphones again.
- In the end, you find your two devices had been connected with the W7 headphones at the same time.
Thank You
Thank you for purchase and support of our products.
Your satisfaction is our great honors, therefore we started ·smile Project”
since 2011.
Smile project is dedicated to provide the most practical products and the best
services to all customers, we have FAQ part to answer the the frequent
question you may encounter and you also can connect with us by email to get
best after-sales services: [email protected]
FAQ
Q1 : Bluetooth headphonesare unable to pair?
Al : Please do the following:
- Reboot the headphones
- Please charge the headphones for 5 mins to reset first, and then comect again.
Q2 : What if my headphones keep falling out ?
A2 : Please do the following:
1. Change the smaller ear tips or put on an ear hook.
2. Make sure wearing them in your ears correctly.
Q3 : What if my headphone cannot be charged ?
A3 : Please do the following:
- Charge the headphones with stable current [Such as laptop)
- Charge your headphones for 5–10 miootes before use them again.
Q4 : Too much badcground noise after pairng?
A4 : Please do the following:
- Please recharge your headphones
- Get your headphones closer to your cellphone.
- Stay your headphones away from electrical or magnetic object.
Specification
Charging power : DC 5V output
Battery type: Rechargeable U·lion battery
Profile support : HSP/HFP/A2DP/AVRCP/APT·X
Package:
1 • Wireless headphones
1 • User manual
1 • use charging cable
3° Ear tips