Dongguan Xuanying Sports Technology S-001 Single Version Wireless Laser Timer User Manual

Dongguan Xuanying Sports Technology S-001 Single Version Wireless Laser Timer

Overview

S-001 wireless laser timer is one of the patented products of Dongguan Xuanying Sports Technology Co., Ltd. This product is simple in structure, convenient in operation, accurate in timing, safe and reliable. It is suitable for general racing sports training and competition timing.

Hardware composition and parameters

1. Starting point laser transmitter (with a laser reflector), end laser transmitter (with a laser reflector), 6-digit LED highlight display, 5 brackets, 5 clamps,
2. antennas, 3 power cords .
3.  Both the laser transmitter and the display are powered by 5V DC power supply (charging treasure).
4. It can test the precise time that a person or object travels between the starting point and the ending point, which can be accurate to one thousandth of a second.
5. 2.4g wireless communication is used between devices, and the effective communication distance is up to 500 meters (strong electromagnetic interference or obstructions may have an impact on the communication distance and communication effect). In general, stable communication is possible within 200-300 meters.

Equipment erection, debugging and use

1. Set up the starting point laser transmitter and reflector to the starting point, and the ending point laser transmitter and reflector to the end point. The display screen can be set to any position that is convenient for observation. Put on the antenna, connect the USB port of the power bank 5V 2A through the power cable (the power bank needs to be prepared by the customer), make sure that the laser points of the two laser transmitters can fall on the corresponding reflector, and the power supply on the side of the display screen Press the reset button below the line interface and hold for about 1 second. At this time, the display screen makes a “beep”, the system resets to zero, the six zeros on the screen are always on, and the system enters the standby state. At this time, if the starting point laser is triggered, the system starts Timing, then trigger the end laser, the system stops timing, and the display shows the time.
2. If you need to test again, you can trigger the starting point laser repeatedly. At this time, the screen will automatically reset to zero and start timing. After the end point laser, the timing will stop and the time will be displayed on the display.
3. If you need to restart the timing after starting the timing and before reaching the end point, you can press the reset button above the power cable interface on the display side. At this time, the display screen makes a beep, the system resets to zero, and the six on the screen zero is always on, and the system will re-enter the standby state.

Customers can also click to view the installation and operation video of the equipment through the Internet, and the equipment operation video is ttached:

Customers in mainland China can click: http://www.iqiyi.com/v_19rxkocyio.html Customers from other regions of China and foreign countries can click: https://youtu.be/FXm7Z-d1vQg

Please note: Due to the particularity of the laser, the optimal triggering distance of the laser sensor is 0.5-3 meters away from the laser transmitter. You can place and erect it according to your actual needs.

Safety and precautions

1. During the use of this product, be careful not to point the laser emission at the human eye.
2. In order to ensure the safety of transportation and the convenience of use, this device does not contain batteries, and does not include the use of power bank (5V DC, USB interface), and the power bank needs to be purchased by the customer. When needed, power can also be supplied to the device through the USB interface of other devices.
3. The fixture interface of this device is a standard 1/4 screw interface, which can be connected to a variety of tripod brackets of different heights (generally those that can be used by SLR cameras on the market can be used), customers can purchase them according to their own needs. High tripod.

Warranty Policy

The electronic parts of this product are guaranteed for one year. If maintenance is required after one year, we only charge the necessary hardware cost and no maintenance fee. Man-made damage and failures caused by self- disassembly are not covered by the warranty.

FCC WARNING

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.

References

• iQiyi - Watch Asian dramas shows movies animes Free online - Streaming Korean drama, Chinese drama, Thai drama, with subtitles and dubbing – iQiyi | iQ.com Logo@1x icon/search icon/history icon/history icon/language Member login Member login icon/add list
• S-001 single-person training version wireless laser timer (2020.2.23 new version） - YouTube

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>