electriQ eiQ-25FHDO165FSGUC 25 Inch Full HD 144Hz Gaming Monitor User Manual
- June 17, 2024
- ElectriQ
Table of Contents
electriQ eiQ-25FHDO165FSGUC 25 Inch Full HD 144Hz Gaming Monitor
Product Information
Specifications
- Model: eiQ-25FHDO165FSGUC
- Display: FHD LED Monitor
- Connections: HDMI port, Display Port, Type-C, USB, Audio out port, DC12V
- VESA Mounting Pattern: 100x100mm
Product Usage Instructions
Wall Mounting
The monitor is provided with mounting holes for a VESA-approved wall mounting
bracket (not supplied). The VESA mounting pattern is 100x100mm and the size of
the screws required is 4 x M6 x 10 (not supplied). It is important not to use
screws longer than specified to avoid damage to the internal components. As
the monitor is considered heavy, it is recommended to consult with a
professional wall mount installer for the installation process.
Getting Started
To get started with the monitor:
- Connect the monitor to a power outlet.
- Press the POWER button on the monitor to turn it on (The indicator will be blue).
- Connect the relevant cable to the corresponding input on the monitor. The source will be automatically detected.
- To change between inputs, press the EXIT button to enter the source menu. Use the navigation buttons to choose the desired input source between Type C, DP, and HDMI.
Monitor Controls
The monitor controls are as follows:
- EXIT MENU: Go back to previous menu / exit the on-screen display.
- Decrease volume: Within OSD, move down/left.
- Increase volume: Within OSD, move up/right.
- Enter the OSD menu: Within OSD, select the highlighted option.
- POWER: Turn the monitor on and off.
Menu Options
The menu for the monitor can be accessed by pressing the MENU button on the
control panel. The menu is divided into the following submenus:
- Brightness
- Image
- Colour Temperature
- OSD Settings
- Reset
- Miscellaneous Settings
Please note that some settings may not be adjustable and will appear grayed out. This could be due to the input source or other options chosen within the menus.
Brightness
The Brightness menu allows you to adjust the image brightness according to the
ambient light in the room. The available options are:
- Brightness: Adjusts the image brightness with a value range of 0-100.
- Contrast: Adjusts the contrast between white and black areas of the image with a value range of 0-100.
- ECO: Allows selection of image settings between STANDARD, TEXT, MOVIE, GAME, FPS, and RTS.
- DCR: Allows the dynamic contrast of the picture to be turned ON and OFF.
- HDR MODE: Allows changing the value between OFF, AUTO, and 2084.
Thank you for choosing electriQ
Please read the user manual before using this monitor and keep it safe for
future reference Visit www.electriQ.co.uk to view
our entire range of Intelligent Electricals
SAFETY INFORMATION
- Read these instructions – All the safety and operating instructions should be read before this product is operated.
- Keep these instructions – The safety and operating instructions should be retained for future reference.
- Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to.
- Follow all instructions – All operating and usage instructions should be followed.
- Do not use this equipment near water, or in humid environments – The appliance should not be used near water or moisture e.g. in a wet basement or near a swimming pool.
- Clean only with a dry cloth. Do not use solvents or petroleum based fluids.
- Do not block any ventilation openings.
- Do not install near any heat sources such as radiators, stoves or other apparatus (including amplifiers) that produce heat.
- Do not tamper with the supplied plug. This plug is a BS1363 standard plug.
- Protect the power cord from being walked on or trapped, particularly at the plug and at the point where it exits from the appliance.
- Only use attachments/accessories specified by the manufacturer.
- Use only with a cart, stand, tripod, bracket or table specified by the manufacturer or sold with the apparatus. When a cart or stand is used, use caution when moving it to avoid any injuries or damage from it tipping over.
- Unplug the apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as if the power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus or it has been exposed to rain or moisture, it does not operate normally or has been dropped.
- Please keep the unit in a well-ventilated environment.
- The monitor should only be connected to a mains power supply as rated on the back of the equipment.
- To prevent overload, do not share the same power supply socket with too many other electronic components.
- Do not place any connecting wires where they may be stepped on or tripped over.
- Do not place heavy items on the cable as this may cause damage.
- When removing from a socket hold by the plug and not the wires.
- Disconnect the power immediately and seek professional help if the plug or cable is damaged, liquid has spilt onto the unit, if accidentally exposed to water or moisture, if anything accidentally penetrates the ventilation slots or if the unit does not work normally.
- Do not remove the safety covers. There are no user serviceable parts inside. Trying to service the unit yourself is dangerous and may invalidate the product’s warranty. Only qualified personnel should service this apparatus.
- Do not block ventilation slots on the back cover. The monitor can be placed in a cabinet but ensure at least 5cm (2″) clearance all around. Do not tap or shake the screen, this may damage internal components.
- Due to our continuous product development, the operation and or features of the product received may vary slightly from the information provided within the manual.
- WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and objects filled with liquids, such as vases, shall not be placed on the apparatus.
- WARNING: The wall plug socket is used as a disconnection device and should remain readily accessible.
- WARNING: The batteries shall not be exposed to excessive heat such as direct sunlight or fire.
AT FULL VOLUME, PROLONGED LISTENING MAY DAMAGE THE USER’S HEARING.
WHAT’S INCLUDED
CONNECTIONS AVAILABLE ON THE MONITOR
| ****
HDMI port
| Used to connect a compatible device. Supports HDMI 1.4 & 2.0 ;
---|---|---
| ****
Display Port
| Used to connect a compatible device. Supports Display Port 1.2
| ****
Type-C
| Supports data transmission, external charging and image display.
| ****
USB
| ****
Used for connecting compatible USB devices
| ****
USB
| ****
Used for connecting compatible USB devices
| ****
Audio out port
| ****
Used for connecting headphones or external speakers
| ****
DC12V
| ****
Power.
WALL MOUNTING
The monitor is provided with mounting holes for a VESA approved wall mounting
bracket (not supplied) The VESA mounting pattern is: 100x100mm and the size of
the screws is 4 x M6 x 10 (not supplied) Do not use screws longer than
specified or damage will occur to the internal components.
NOTE : As the monitor is considered heavy, please consult with a professional wall mount installer to perform the installation.
GETTING STARTED
MONITOR CONTROLS
EXIT
| Source Menu
Within OSD: Go back to previous menu / exit the on screen display
---|---
| Decrease the volume. Within OSD: Move down/left
| Increase the volume. Within OSD: Move up/right
MENU
| Enter the OSD menu
Within OSD: Select the highlighted option.
POWER
| ****
Turn the monitor on and off.
INITIAL SETUP
Connect the monitor to a power outlet.
- Press the POWER button on the monitor or to turn it on (The indicator will be blue)
- Connect the relevant cable to the corresponding input on the monitor. The source will be automatically detected.
- To change between inputs, press the EXIT button to enter the source menu. Use the buttons to choose the input source between Type C, DP and HDMI.
MENU OPTIONS
The menu for the monitor can be accessed by pressing the MENU button on the
control panel. This menu is separated into the following sub menus:
Brightness, Image, Colour Temperature, OSD Settings, Reset, and Miscellaneous
options, details of each menu can be found in the following section.
Please Note: Some settings may not be adjustable in which case they will be grayed out. This could be due to the input source or other options chosen within the menus.
BRIGHTNESS
-
BRIGHTNESS
Allows the adjustment of the image brightness, according to ambient light in the room. Value “0-100” -
CONTRAST
Allows the adjustment of the contrast between white and black areas of the image. Value “0-100” -
ECO
Allows selection of image settings between the following: STANDARD, TEXT, MOVIE, GAME, FPS, and RTS”. -
DCR
Allows the dynamic contrast of the picture to be turned ON and OFF -
HDR MODE
Allows to change the value between “OFF, AUTO, 2084 “.
IMAGE SETTINGS
-
H. POSITION
Allows adjustment of the horizontal position of the display image. Press the buttons to horizontally move the image. -
V.POSITION
Allows adjustment of the vertical position of the display image. Press the buttons to vertically move the image. -
CLOCK
Allows adjustment of the CLOCK setting. Value “0-100” -
PHASE
Can reduce video distortion and instability. Value”0-100″ -
ASPECT
Allows selection of video format of the between “16:9, 4:3 “.
COLOUR TEMPERATURE SETTINGS
-
COLOR TEMP.
Allows adjustment of the colour settings between the following options: ”Normal – Warm – Cool – User”. When set to “User”, you have full control to alter the individual settings Red : 0-100, Green: 0-100, and Blue : 0-100. -
RED
Allows adjustment of the red element of the image -
GREEN
Allows adjustment of the green element of the image -
BLUE
Allows adjustment of the blue element of the image
OSD (ON-SCREEN DISPLAY) SETTING
-
LANGUAGE
Allows selection of desired language: “ENGLISH, FRENCH, TURKISH, ITALIAN, SPANISH, PORTUGUESE, CHINESE, DUTCH, JAPANESE, GERMAN, POLISH, AND KOREAN.” -
OSD H. POS
Allows adjustment of the horizontal position of the OSD -
OSD V. POS
Allows adjustment of the vertical position of the OSD -
OSD TIMER
Allows adjustment of the duration of the OSD, value “5-60” -
TRANSPARENCY
Allows adjustment of the transparency of the OSD, value “0-100”.
RESET
-
RESET
Returns the monitor to its factory default settings. -
OD (Overdrive)
Allows the monitor to force a faster response time when activated (165Hz).
MISCELLANEOUS
-
SIGNAL SOURCE
Allows users to choose the signal source of the display “HDMI, DP, and Type C”. -
VOLUME
Allows adjustment of the volume of the monitor from “0-100”. -
LOW BLUE LIGHT
Allows adjustment of the low blue effect of the display, value: 0-25-50-75-100. -
FREE SYNC
Allows FreeSync to be turned ON and OFF.
SPECIFICATION
eiQ-25FHDO165FSGUC
Panel Type| 25″ (16:9) LED Backlit Monitor
Panel Dimensions| 623mm Diagonal
Case Type| Plastic
Best Resolution| 1920(H) x 1080(V) @ 144Hz (165Hz Overdrive)
Active Display Area| 543.744(H) X 302.616 (V)
Pixel Pitch| 283.2 x 280.2
Contrast Ratio| 1000:1 Typical
Brightness| 400 cd/m²
Response Time| 5ms(GTG)
Viewing Angle| 176°/170° CR≥10
Display Colours| 1.07G
Adjustable Colour Temperature| WARM/ COOL /USER
Video Compatibility| Multi-Standard for NTSC / PAL
Aspect Ratio| 16: 9
Speaker Multimedia Speakers| 2 X 3W
Sound Demodulation| Stereo. Audio
Mute| Yes
Operating Humidity| 20 % – 70 %
Operating Temperature| – 10 to 50 °C
IN/OUT INTERFACE
Video Interface| HDMI 2.0 x 1, DP 1.2 x 1,Type-Cx1,USBx2
Audio Interface| Audio Out x 1
Safety & EMC Certification| CE / FCC / ROHS
Stand Type| Desktop
Button Position| Right Hand Side
POWER Input| DC 12V 3A
Power Consumption| ≤ 36W
TROUBLESHOOTING
| Problem | Solution |
|---|---|
| No power | Insert the plug securely into the power outlet. |
No picture
| Ensure that the equipment is connected properly.
Ensure the correct input is selected.
Buttons on the monitor don’t do anything| Disconnect the power plug and then
reconnect it. (The unit may not be operating properly due to lightning,
static, or other factors.)
Noise or other interference| Electronic equipment near the unit may be causing
interference. Relocate the unit or move the equipment.
ENVIRONMENTAL PROTECTION
Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your Local Authority or
retailer for recycling advice. electriQ UK SUPPORT
www.electriQ.co.uk/support
If the unit fails to operate call: 0871 620 1057 or complete the online form Office hours: 9AM – 5PM Monday to Friday www.electriQ.co.uk Unit J6, Lowfields Business Park Lowfields Way, Elland West Yorkshire, HX5 9DA
FAQ’S
Can I mount the monitor on a wall?
Yes, the monitor is compatible with VESA approved wall mounting brackets. The VESA mounting pattern is 100x100mm. Please consult with a professional wall mount installer for the installation.
How do I change the input source on the monitor?
To change the input source, press the EXIT button to enter the source menu. Use the navigation buttons to choose the desired input source between Type C, DP, and HDMI.
References
- Buy electriQ Appliances Online | TVs | Ovens | Dehumidifiers | Security
- Manual-Hub.com – Free PDF manuals!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>