LENTION T2 ANC True Wireless Earbuds User Manual
- June 6, 2024
- LENTION
Table of Contents
LENTION T2 ANC True Wireless Earbuds
IN THE BOX
Specifications
PRODUCT DETAILS
Please charge the earbuds and the charging case for at least 15 minutes before first use.
LISTENING COMFORT
Select the right size of ear-tip
Choose the ear-tip with the most comfortable fit and best seal. To change an ear-tip, gently pull it off from the earbud and press on the new one.
wearing the Earbuds
Gently Insert the earbuds Into the ear and adjust to a comfortable position by rotating them. R Is for the right ear, and L for the left
BATTERY LIFE AND CHARGING
Battery life
In Bluetooth mode the buds can last for 5 hours of continuous play. Using the
charging case, this can be extended to 30 hours.
Charging the airbuds
Place the earbuds in the charging case then close the charging case.they wlll
automatically shut down and begin charging
Charging the charging Case
PLAYBACK CONTROLS
AUTOMATIC CONNECTION
Pairing:
- Tum on the Bluetooth of your mobile phone
- Open the charging case, they wlll automatically turn on and enter the pairing state.
- Tum on the pairing function on the device to be paired with the earbuds
- From the 11st of avallable devices Rnd and select ‘T2-ANC-BLK” from the list of available devices.
- If a code or PIN code Is required for pairing, please enter ‘0000’
Automatic remote connection
- When you tum on the earbuds, they wlll automatically reconnect to the last-paired device or enter pairing mode if no paired device is found.
- Forced pairing, 5tap on either side of the touch button, disconnect the current Bluetooth connection, re-enter the pairing mode, the blue light quickly flashes.
- .ln pairing mode, the earbuds wlll automatically turn off after 5 minutes if no devices are paired.
- Place the earbuds In the charging case then close the charging case.they will automatically shut down and begin charging.
- If the Bluetooth connection is lost. they will automatically begin pairing
NOTE:
- If one of the earbuds has no sound output, put both earbuds back into the charging case and take them out again.
- The maximum wireless operating range Is 1 Om (33ft). If you exceed this range, the earbuds will disconnect from your paired device. The connection wlll be re-establlahecl If you re-enter the wireless range within 5 minutes. The earbuds will automatically reconnect to the last-paired device. To connect with other devices, repeat the previous pairing steps.
SAFETY INSTRUCTIONS
-
Do not place the earbuds in extremely high or low ambient temperatures for an extended period of time. Extreme temperatures will cause the device to deform.
-
Use electronlc equipment with caution during thunderstorms.
-
This product contains small parts which could cause harm If swallowed. Keep out of the reach of children.
-
Using the earbuds for a long time at high volume may effect your hearing. Make sure to use an appropriate level of volume.
BATTERY WARNING
This product contains a lithium battery. Please do not disassemble, strike,
crush, or place the product Into contact with flames. Do not expose to high
temperatures or direct sunlight for a prolonged period. If there is any
swelllng. leakage, odor, or any other abnormality In the battery compartment
of the product, cease use immediately. Please dispose of used batteries
property and In accordance with local regulations
FCC Statment
READ ALL INSTRUCTIONS BEFORE USE AND SAVE THESE INSTRUCTIONS FOR FUTURE
REFERENCE
This equipment has been tested and found to comply with the limits for a Class
B dlgltal device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful Interference In a
residential installation.This equipment generates uses and can radiate radio
frequency energy and, if not installed and used In accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that Interference wlll not occur In a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the followlng measures:
- Reorient or relocate the receMng antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment Into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with Part 15 of the FCC Rules. Oparation is subject to the followlng two conditions: (1) this device may not cause harmful interference. and (2) this device must accept any interference receive Including interference that may cause undesired operation.
FCC RF EXPOSURE STATEMENT
This transmitter must not be co-located or operating In conjunction with any other antenna or transmitter. This device complles with FCC radiation exposure llmlts set forth for an uncontrolled environment.
CAUTION!
Any changes or modifications not expressly approved by the party responslble
for compliance could void the user’s authority to operate the equipment.
ISED Statement
English: This device complies with Industry Canada license‐ exempt RSS
standard(s). Operation is subject to the following two conditions: (1) This
device may not cause interference, and (2) This device must accept any
interference, including interference that may cause undesired operation of the
device. The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B).
This radio transmitter (ISED certification number: 27047-201068 ) has been
approved by Industry Canada to operate with the antenna types listed with the
maximum permissible gain indicated. Antenna types not included in this list,
having a gain greater than the maximum gain indicated for that type, are
strictly prohibited for use with this device.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>