N-POINT UWA-100 Intelligent Wi-Fi Bluetooth Sensor User Manual

N-POINT UWA-100 Intelligent Wi-Fi Bluetooth Sensor

Product Information

Package Content

LED / button Indicator

Power

| ****

Red

| On| Device power on
Off| Device Power off
Battery| Red| On| Device Battery on
****|  | Flashing| Device low battery
---|---|---|---
Off| Device Battery off

Wi-Fi or BLE

| ****

Green

| On| Wi-Fi/ BLE wireless activity (transferring/receiving

data).

Quick

Flashing

| Reset factory settings
Off| Wi-Fi/ BLE not active.
Recording| ****

Green

| Flashing| Device is not record
On| Device is recording
Power Button| Open| Press and hold the button for 1 seconds
Close| Press and hold the button around 6 seconds
Record/ Reset

Button

| Record| Press and hold the button for 1 seconds
Reset to factory default| Press and hold the button around 10 seconds
Reboot

Button

| Reboot to factory default| Press and hold the button for 10 seconds

Installation

This section will guide you through the steps to connect your UWA-100 to the Internet.

Install Android APK

This tool support at Android phone or tablet and kernel version 5~10, please scan below QR code to download the file and install at Android phone or tablet, when install successful then can see APP icon as below.

This app the purpose is manage GWB-100 series gateway setting functions, won’t impact or damage your Android phone or tablet functions or system, when pop-up the risk warm message during the installation process, please allow then to complete whole process. This app need two functions authority, one is location for “site survey” another “photograph” for scan QR- code.

Site Survey

Before deploying GWB-100, please do a site survey on the Internet Wi-Fi signal at the desired deployment location. This will ensure that the GWB-100 can remain connected to the Internet for up-to-date sensor data transfer.

1. Please bring your android smart device to the desired deployment location.
2. Go to the Wi-Fi page on your android device (e.g. Settings, Wi-Fi).
3. Please find your desired Wi-Fi connection and check the signal strength icon.

If the icon displays 2 bars or more signal strength, please go to the next section. If the icon displays 1 bar or no signal strength, please find another location to do the site survey process again till to find a suitable location.

Connecting Device to the Internet

1. Please plug the power adapter to a power socket and connect the Device using the USB cable.
2. Open the app and tap the + icon for “Add New Device” on the top right corner of the screen.
3. Select the set up device from the Available wireless device list.
4. Setup the cloud URL by barcode, please get this cloud URL barcode from your system supplier.
5. Select your Wi-Fi network from the list and, where applicable, enter the Wi-Fi password. Tap the “Next” icon to complete setup. If you cannot find the desired Wi-Fi network SSID, please refresh network list.
6. Setup is complete, and please wait two minutes to check the device list.

Internet Check

Check device internet status, change the command mode to be “on”, Select the set up device from the Available wireless device list, and click the “Internet check “ button, then will get the testing status at bottom of page.

Reboot Setting

Device reboot process to change the command mode to be “on”, Select the set up device from the Available wireless device list, and click the “reboot “ button, then will get the testing status at bottom of page.

OTA Setting

Device OTA process to change the command mode to be “on”, Select the set up device from the Available wireless device list, and click the “check for updates “ button will update the latest firmware version, once device version is less than this,, then will get the testing status at bottom of page.

Reset Setting

Device reset process to change the command mode to be “on”, Select the set up device from the Available wireless device list, and click the “reset to default “ button, then will get the testing status at bottom of page.

Product Features

Application Scenario

The UWA-100 collects sound and data from sound identifies anomalies, classifies equipment failure modes, and predicts the problem before interrupts production.

Data Collect
The UWA-100 through the microphone sensor to collect sound and data.

Web dashboard

1. Project: Recorded sounds data by UWB-100 will be stored at cloud or physical server(IoT server) and user can see stored sensor data as real-time as spectrogram image(PNG file format) and audio(WAV file format).
2. Training: Based on recorded sounds data at cloud or physical server(IoT server), user can run one of training models(Machine Learning) after selecting training data by time period.
3. Testing: After training sensor data, the trained data will be stored at cloud or physical server(IoT server). And user can adjust threshold value that AI analysis and machine learning recommends. When beyond threshold sound values are detected by UWA-100, cloud or physical server(IoT server) will notice to user.
4. Status: All of training status and testing status can be checked at this features
5. Management: User can add new UWA-100 or edit details of UWA-100 or delete current operating UWA-100 from cloud or physical server(IoT server).
6. Alert notice: User can see all abnormal detected cases here and compare between randomly created standard spectrogram image by AI and abnormal spectrogram image.

FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

CAUTION:
Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF exposure warning
This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>