Shenzhenshiyimukejiyouxiangongsi BH-M6S Mono Bluetooth Headset User Manual

BH-M6S
Mono Bluetooth Headset
User Manual

Product Overview

Package Contents:

A. Bluetooth Headset BH-M6S X 1
B. Micro USB charging cable x 1
C. User manual x 1

Basic Operation

pairing mode.
Play/Pause| Short press when play music.
Redial A Call| In connected status,double press MFB to dial the last call.
Voice Dialing| In connected status, long press MFB for 3 second then release.
Audio Switch| When during a call, long press for 1 second MFB then release.
Answer A Call| When a call incoming,short press to answer
Hang Up A Call| When during a call, short press to hang up
Reject A Call| When a call incoming, long press for 1 second to reject a call.
Microphone
Mute| When during a call, double press to mute, double press again to cancel
Volume +| Volume Up| Short press.
Next Song| Long press for 1 second.
Volume –| Volume Down| Short press.
Previous Song| Long press for 1 second

Bluetooth Pairing and Connection:

A. In off status, long press MFB for 3 seconds to enter pairing mode with Blue & Red LED flash alternately (If there is pairing record please long press MFB for 5 seconds).
B. Search and click to connect “ BH-M6S” on your phone Bluetooth lists, LED change to Blue slow flash once every 10 seconds after connected, now you can play music from phone to headphone.
C. You can press MFB / volume+ / volume- on the Bluetooth headset to control the answer/hang up a call and play/pause of the music, next and previous song, volume up and down.

Connection with Two devices:

A. Follow part 3 to connect with first phone, then turn off the Bluetooth function of first phone.
B. Turn off the headset then long press MFB for 5 seconds to enter pairing mode again with Red & Blue LED flash alternately. Turn on the bluetooth function of second phone to search and connect “BH M6S”, LED change to Blue flash once every 10 seconds.
C. Turn on Bluetooth function of second phone, click to reconnect “BH -M6S” on Bluetooth lists. LED change to Blue slow flash after connected.
D. Turn on Bluetooth function of first phone, click to reconnect “BH M6S” on Bluetooth lists. Headset is connected with two phones now.

Notes：
Music only can be played from one phone under two connections, when you want to play music from another phone, you need to pause or turn off the music of the previous phone. The same operation during talking status.

LED Indicator

Charging

Please charge the BH-M6S at once when the Red LED flash. Charging time is about 2 hours. Red LED turn off when full charged.

Charge Connections
Please connect to the BH-M6S charging port through the Micro USB end of Micro USB charging cable, the USB end to the charger as car charger, travel charger, computer USB, etc.

Notes：

1. Please charge the BH-M6S at least one time every 2 months when don’t use it.
2. Plug charging cable for charging when power on, will reset the headset and power off.

Product Specification:

Notes：
*Actual use time will differ from environment and music

Attentions and Q & A :

A. How to reconnect and operation when failed to reconnect?
When BH-M6S connected with your mobile phone successfully at the first time, it will search and reconnect the paired device automatically when power on, If failed, please pair and connect again.

B. How to delete paired records?
In power on status, long press the MFB and Volume + for 5 seconds to clear the pairing record. Blue and Red LED flash once at the same time that means the pairing record has been cleared, and the BH-M6S will not connect the connected device. When there are various connection problem, try clearing the pairing record firstly.

C. What’s the password for pairing?
Some connection devices require password for pairing, please try 0000 or 8888 or 1111 or 1234.

D. What devices could charge for the headphone?
Any car charger, power bank, PC, etc which meet DC 5V, charging current more than 500mA could be charge for this item.

E. How to do if can not power on or dead？
Please try charging reset: Plug the charging cable when power on, it will reset the headset and power off.

Federal Communications Commission Notice This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>