INKBIRD ITH-12S Temperature and Humidity Smart Sensor Instruction Manual
- June 6, 2024
- INKBIRD
Table of Contents
ITH-12S
Temperature & Humidity Smart Sensor
Battery Cover
- Sensor
- Current Temperature
- Battery Life
- Bluetooth Icon
- °C/°F/Bluetooth Button
- Min/Max Temp Button
- Current Humidity
- space for magic tapes
Buttons&Operations
°C/°F/Bluetooth Button
Press the °C/°F/Bluetooth Button to turn on/off Bluetooth.
Hold the °C/°F/Bluetooth Button for 3 seconds to switch between °C and °F.
Note: In order to reduce power loss, we suggest turning off the Bluetooth in use.
Min/Max Button
Press the Min/Max Button to alternatively display minimum/maximum values of
temperature and humidity on the screen.
Hold the Min/Max Button for 3 seconds to clear all historic max/min values. The device will record new max/min values after clearing the historical records.
Technical Parameters
Battery | 1* CR2032 Battery |
---|---|
Bluetooth Connection Range | 30 meters (98ft) |
Temperature Measurement Range | 0°C~60°C/ 32°F~140°F |
Temperature Accuracy | Typical: ±0.3°C/±0.50°F |
Max: ±0.5°C/±0.99°F
Humidity Range| 0%RH-99%RH
Humidity Accuracy
(25°C/77°F, 20%~80%RH)| Typical: ±3%RH
Max: ±4.5%RH
RH Humidity Accuracy
(25°C/77°F, 0%~100%RH)| Typical: ±4.5%RH
Max: ±7.5%RH
APP CONTROL
1. Download the app
Android IOS
Search “Engbird” in App Store or Google Play to download it for free, or you can scan the QR code above to install it directly.
Note: Please make sure your phone supports Bluetooth.
Please make sure the Bluetooth on the device is on before connecting. If it’s off, please press the °C/°F/Bluetooth Button to turn on Bluetooth.
2. Open the app, turn on Bluetooth.
3. Put the device close to your phone and click “Add Sensor” or “+” to add devices.
4. Choose a usage scenario and click “Done” to complete the connection.
5. The main interface of the app
- Battery Life
- Add Sensor
- Graph & Distribution of Historical Data
- Sensor Setting
- Current Humidity
- Current Temperature
- Usage Scenario
- App Setting
Note: A mobile phone can be connected to multiple sensors at the same time and a sensor can be connected to multiple phones as well.
Warning
- Please do not disassemble the product if you are not a professional.
- Be sure that the sensor is not covered with dust as dust may lead to inaccurate measurements.
- Do not use alcohol to clean the sensor.
FCC Requirement
changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy, and if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator & your body. This transmitter
must not be co-located or operating in conjunction with any other antenna or
transmitter.
INKBIRD TECH.C.L
Support@inkbird.com
www.inkbird.com
6th Floor, Building 713, Pengji Liantang
Industrial Area, NO.2 Pengxing Rd,
Luohu Disctrict, Shenzhen, China
C&E Connection E-Commerce (DE) GmbH
Zum Linnegraben 20,65933,
Frankfurt am Main,Germany
V 4.0
Documents / Resources
|
INKBIRD ITH-12S Temperature and Humidity Smart
Sensor
[pdf] Instruction Manual
ITH12S, 2AYZD-ITH12S, 2AYZDITH12S, ITH-12S Temperature and Humidity Smart
Sensor, Temperature and Humidity Smart Sensor
---|---