Shenzhen Fls Electronic FLS-196 Wirelessly Stream Your Music over Bluetooth User Manual

Shenzhen Fls Electronic FLS-196 Wirelessly Stream Your Music over

Bluetooth

Thank you for purchasing our LFS bluetooth speaker.
For best performance and safety purpose, please read this manual carefully before use the product. Please keep this manual for future reference.

1. Power button
2. USB Charging Port
3. LED Charging lndicator
4. Microphone Hole

Operation instruction

Power/Led light button:

Long press the button,the power will be ON/OFF; The LED light will automatically change after power on

Pause/Play
Single press to change fix color from Light blue-red -green-yellow-purple- Navy-Pink-light off, Double press to pause and play

Handsfree (Answer/Hang up calls)
When bluetooth is connected, press the button to receive the call once you have a call in; if you want to end the call, please press the pause/play button again.
(You can select on the phone to use the speaker or the phone to answer the call when a call comes in.)

1. TWS Function:
   Thrice tap the button of one speaker quickly,the twin speaker will connect/disconnect with each other.

2. USB Charging Port
   Use USB cable (included) to charge the speaker from apower source

3. LED Charging lndicator
   The LED indicator light will be red when charging. After full charged, the red light will be off.

4. Microphone Hole
   lt’s a microphone hole, answer the phone call through the microphone

5. Bottom magnetic design
   There is a magnet at the bottom of the speaker,you can easily attract this speaker on flat iron surface.

Waterproof:
The LFS GemMusic bluetooth speaker is resistant to splash, rain, gentle spray, therefore is applicable in shower room,by the pool or beach, and even in the small rain. Do not put it directly into water.

How to use bluetooth:

1. Turn on your mobile phone and activate the speaker device bluetooth function.
2. Search for bluetooth device named “LFS GemMusic” and make a pair, then the speaker begins to work.

What is TWS function:

Two of this speakers can connect with each other and play stereo music at the same time from a mobile phone.
How to connect two LFS GemMusic speaker?

Method one:

1. Power on two LFS GemMusic, they will search each other and connect with each other automatically, you will hear a short prompt voice when connected successfully .
   The first time connection will take longer time.After first successful connection,it will take less time to connect in next times.

2. After two LFS GemMusic connected with each other, use your phone to search “LFS GemMusic” and make a pair, there will be a short prompt voice when the phone is connected with the twin LFS GemMusic successfully, now the twin speaker can play your music sync.

Method two:

1. When one LFS GemMusic speaker is connected with your mobile phone already, power on another
   LFS GemMusic, it will automatically search and connect with the first LFS GemMusic speaker .

How to disconnect two LFS GemMusic speaker?

After twin LFS GemMusic connected with each other and connected with the bluetooth devices,

Method one:
Thrice tap the button of any speaker quickly , the twin LFS GemMusic will disconnect with each other. Thrice tap the button of any speaker quickly again,the twin speaker will connect back with each other.

Method two:
Power off one speaker.

Usage Tips:

1. Make sure your phone, tablet,laptop or other desktop device is bluetooth-enabled.
2. The operational range of the speaker may be influenced by obstructions like walls, pillars, etc. To ensure a stable connection, we recommend avoiding such obstructions whenever possible and/or shortening the distance during use.
3. Power off the speaker when not in use.
4. The speaker will send alert when the battery voltage is low.
5. Exceptions may occur when misoperation happens or the battery is too low. Please fully charge battery and turn on the on/off button to reset.

FCC IC warning statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful nterference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and,if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifcations to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>