STR GROUP Xgimi MoGo 2 Smart 1080P Android TV Portable Projector User Guide

Xgimi MoGo 2 Smart 1080P Android TV Portable Projector
User Guide

Xgimi MoGo 2 Smart 1080P Android TV Portable Projector

Remote Control

Instruction of Buttons

Note:

1. Please keep the remote control aiming at the projector screen.
2. Please take out the battery if the remote control is not used for a long time.

How to use the external mouse?

1. Click the left button on mouse to enter the screen you have selected.
2. Click the right button on mouse to exit the screen you have selected.

Focus

Slide the focus adjust to the left or right to make the picture clear.

Connection & Key

HDMI
Connect External Multi-media Interface
Connect the HD cord to the projector and click HDMI on the home screen which will appear in sync within five seconds .
Notes: It can be combined with Amazon Fire TV Stick to connect the projector.

1. Plug the Fire TV device into projector HDMI port.
2. Check the Audio setting on your Amazon Fire TV or Fire Stick.
3. If you’re still experiencing audio issues, try turning off Dolby Digital Plus: On your Amazon Fire TV or Fire Stick, go to Settings> Display & Sounds> Audio> Dolby Digital Output and then turn Dolby Digital Plus OFF.

Shortcuts Bottom

1. Delete the apps you download by pressing and holding down the ok button for two seconds.
2. You can clean the memory by holding the home button for two seconds.
3. Press the mouse button briefly to switch the mouse mode/remote control mode

File Explorer

Please check the files in File Explorer when you play in your USB.

Wireless screen (Windows)

Windows with screen operation guide

1. Please confirm your Windows and projector IP addresses are connected to the same LAN.
2. Use the following link to download and install: http://cdn.sharemax.cn/app/EShareClient-STD.exe
3. Click Esha recent-STD, and the name and IP address of the projection device will appear. Click “Start Screen Transmission” to begin using the wireless screen.

http://172.18.1.74:8000/?sn=0xbf&ssid=DingTalk&devicename=EShare-3624&pincode=&port=8121

Airplay (iPhone)

iPhone Airplay mirror operation guide
Supported by the following devices: iPhone 5 and above, iPad 2 and above, iPod Touch (5th generation and above).

1. Connect your iPhone and projector to the same –WIFI– network (5G first) IPhone Airplay mirror operation guide
   Supported by the following devices: iPhone 5 and above, iPad 2 and above, iPod Touch (5th generation and above).

2. Click to open the projected Airplay, and then Eshare-**** will be displayed in the lower left corner.

3. Slide your finger from the bottom of the iPhone screen to the top, bringing up a new menu, and open the iPhone control center (Slide from the top down for iPhone X),

4. Click Air Play Mirroring and the device list will automatically search for the projected devices within the same network

5. From the device list, click the name of the projected device you want to connect to (Eshare-****) to successfully cast the screen.

http://172.18.1.145:8000/?sn=0xbf&ssid=DingTalk&devicename=EShare-7556&pincode=&port=8121

Airplay (iPhone)
Use mobile hotspot for Air Play mirror operation guide

1. For use without having a LAN or WiFi available, first turn on “Settings” — “Personal Hot spot” –“Allow others to join” on the iPhone, select and turn on
2. Click “Settings” of the projector — turn on “WIFI”, search for the hotspot name of iPhone, and find and connect.
3. Swipe your iPhone from the bottom up and open the iPhone control center (Slide from the top down for iPhone X).
4. Click “Air Paly Mirroring” and the device list will automatically search for the internal projection device in the same network.
5. From the device list, click the name of the projected device you want to connect to (Eshare-****) to successfully cast the screen

!Phone Air Play reverse

Screen Projection operation Guide

1. Click to open the projected Airplay, then follow the prompts on the page to scan the QR code of your iPhone, download and install the corresponding Eshare APP.http://172.18.1.77:8000/?sn=0xbf&ssid=DingTalk&devicename=EShare-5200&pincode=&port=8121
2. Open the Eshare app on the mobile phone, and the device list will automatically search for the internal projection device of the same network.
3. Click the projection device (Eshare-****), “one-click screen transmission” and “Reverse screen transmission” will appear simultaneously.
4. Click “Reverse Screen Transmission”.

Wired Same Screen (iPhone)

1. It is bestow connect the projector to the phone using the original Apple phone data cable;
2. The iPhone will pop up a “Trust” window, click “Trust” and enter the unlock password to automatically achieve the same screen

Wired same screen (Android phone)

1. Download and install “Eshare” software using a mobile phone that requires screen projection
2. Connect the projector to the phone using the original USB data cable
3. Opentheinstalled “Eshare” and a pop-up window will display whether to cast the screen. Click OK to successfully cast the screen.
   (If “Eshare” requires permissions such as “Display on top of the phone”, you need to agree and enable this permission for “Eshare”.)

Android Miracast operation guide

1. The android phone and the projector connect the WIFI.
2. Enter settings and click maracas.
3. Open “More Connections or Screen Projection for Android Phone” on the mobile phone (there are a variety of models of Android mobile phones which may have different names, and the mobile phone to be referred is HUAWEI mobile phone).
4. The phone and projector will search for same model in a few seconds and connect successfully.

How to play 3D movies

For the 3D glasses, only use LCD Active Shutter 3D glasses. Please remember to charge the glasses prior to first time use.
Select the correct video format, open the 3D video on the projector, and then open the 3D settings in the settings. Here, you will see two options, left and right video format (SBS) and up and down (TB) video format.

How to play 3D movies
Example: For a SBS video, you need to choose the SBS option after you press the 3D button.
For a TB video you will need to choose the TB option after you press the 3D button.

WIFI| Connection
Homepage>Settings>WiFi >Turn on WiFi option

Bluetooth Connection
Homepage>Settings>Bluetooth>Open Bluetooth

Picture mode

1. Brightness mode: Middle / High/ Low
2. Color temperature: Cool / Warm / User defined
3. Projection mode: Front/Rear/ Ceiling front/Ceiling rear/Auto
4. Steeples zoom: Global / Vertical / Horizontal

Trapezoidal settings:
Trapezoidal Calibration: Automatic/manual trapezoidal Calibration

1. Automatic Trapezium Calibration: Turn on the automatic trapezoid calibration option and check horizontal O° calibration option.
2. Manual Setup: Adjust the trapezoidal shape on the basis of the offset. After clicking to restore the default option, the initial state will be automatically reset.
3. Quadrangular Trapezium Calibration: The four angles of trapezoid can achieve the free adjustment, and click “OK” to switch to the next angle, then click the menu key to return to the default settings.

General settings

1. Wallpaper: General Settings > Wallpaper > Left and right keys to select wallpaper
2. Time zone: General Settings > Time zone > Select your time zone
3. Input method: You can switch different input methods after installing other input methods
4. Fan setting: Automatic / manual (high , medium , low )

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>