RCA WHP145 Wireless Headphones User Guide
- June 6, 2024
- RCA
Table of Contents
RCA WHP145 Wireless Headphones User Guide
Unpack
Make sure your wireless headphone package came with the following items, then continue to the next page to start setting up!
1. Install the headphone batteries
To install batteries in the headphones:
- Remove the ear cushion from the headphones’ right earcup. This exposes the headphones’ two battery compartments.
- Insert the two provided rechargeable batteries. Make sure you match the polarity (+/) of each battery compartment.
- Line up the posts on the ear cushion with the holes on the earcup and press the ear cushion back onto the earcup so that it snaps in place.
2. Power the charging cradle/transmitter
- Plug the power adapter into the DC IN jack on the back of the charging cradle/ transmitter
- Plug the other end of the power adapter into a working outlet or surge protector.
3. Charge the headphones
Before you use the headphones for the first time, make sure you give them a full charge. Leave the headphones in the charging cradle for 24 hours for this first charge to ensure maximum battery life.
- Make sure the headphones’ power switch is in the OFF position.
- Place the headphones on the cradle/transmitter as shown here. Make sure the headphones’ charge contacts are touching the charge prongs on the cradle/transmitter.
The green CHARGE indicator on the cradle/ transmitter’s front panel illuminates while the headphones are charging.
WARNINGS:
Never attempt to recharge non-rechargeable batteries.
Never use non-rechargeable batteries to replace the rechargeable (AAA size)
batteries supplied.
When the headphones are not in use, move the switch to the OFF position to
avoid damaging the batteries.
Always ensure that the headphones are switched to the Off position while the
batteries are charging.
Batteries (battery pack or batteries installed) shall not be exposed to
excessive heat such as sunshine, fire or the like.
IMPORTANT: This unit should be operated with rechargeable batteries only. When replacing the batteries or when disposing of the unit, always comply with applicable laws relating to the disposal of batteries. Please place them in a proper disposal container to ensure that they are eliminated safely and in an environmentally friendly way.
REPLACING BATTERIES The rechargeable batteries supplied with your wireless headphones should last a long time. If, however, you need to replace them, follow the directions for installing the headphone batteries. Make sure you use AAA rechargeable batteries.
4. Connect the cradle/transmitter to an audio source
The cradle/transmitter can be connected to the headphone jack of many kinds of audio devices (like TVs, audio systems, VCRs, MP3 players, smartphones, or computers). It can also be connected to the RCA stereo jacks (like those found on many TVs) using the adapter provided.
To connect to your audio device:
-
Find the headphone jack or other audio output on your audio device.
Note: For best results with a TV, use its fixed audio output. -
Find the cable that runs from the back of the cradle/transmitter.
-
Connect to your audio device using one of the methods below.
For headphone jacks, plug the end of the cradle/transmitter’s cable directly into the jack.
For RCA stereo jacks, plug the cradle/ transmitter’s cable into the provided Y Adapter. Then plug the adapter’s RCA stereo connectors into the audio device’s stereo jacks.
5. Start playing audio
Turn on your audio device if it’s not already turned on. For variable volume sources (ones with volume adjustment), make sure the volume is around 50%. Then start playing audio on your device. The cradle/transmitter’s red POWER indicator lights up as soon as it’s powered and senses an incoming audio signal.
6. Turn on the headphones
Put the ON/OFF switch on the headphones in the ON position. Make sure the headphones are not too loud! (Use the volume dial on the headphones to adjust headphone volume.) Then put the headphones on and enjoy!
If you hear interference, press the AUTO TUNE button on the headphones (the indicator light next to the AUTO TUNE button comes on). For best results, try auto tuning the headphones at a distance of around 20 feet (7 meters) from the cradle/transmitter.
If you don’t notice an improvement after several attempts at auto tuning, try changing the channel setting on the back of the transmitter. Then press the AUTO TUNE button on the headphones to find the new channel.
Note: The transmitter automatically switches off after approximately four minutes without an audio signal (or if the audio signal that it receives from the audio source is too weak for proper reception). Once the signal returns to an acceptable level, then the transmitter automatically switches on again.
TROUBLESHOOTING
NO SOUND
- Make sure the cradle/transmitter’s power adapter is plugged into your outlet properly, and that the other end of the adapter is properly connected to the DC IN connector on the cradle/transmitter.
- Make sure the cradle/receiver and headphones ON/OFF switches are both switched to ON.
- The headphones’ battery charge level might be too low. Place the headphones on the cradle/transmitter to recharge them.
- Make sure your audio source is turned on and not muted.
- Use the headphones’ volume control to increase their volume.
- Make sure your audio source is playing something with audio. Make sure the audio source is turned up loud enough that the cradle/transmitter’s POWER indicator turns red.
- Make sure the audio cable from the cradle/transmitter is connected properly to your audio source’s audio output jack(s).
DISTORTION
- Make sure the headphones’ indicator light next to ON/OFF switch is illuminated. If not, press AUTO TUNE on the headphones until it lights.
- Use the channel selector on the back of the cradle/transmitter to change the transmitter’s transmission frequency. Then press the headphones’ AUTO TUNE button to retune to the new frequency.
- The headphones’ battery charge level may be too low. Place the headphones on the cradle/transmitter to recharge them.
- Turn the headphones down.
- The headphones might be too far away from the cradle/ transmitter. Move closer to cradle/transmitter.
- The audio signal input level from your audio device might be too low. Increase its volume.
12 Month Limited Warranty
Voxx Accessories Corporation (the “Company”) warrants to the original retail
purchaser of this product that should this product or any part thereof, under
normal use and conditions, be proven defective in material or workmanship
within 12 months from the date of original purchase, such defect(s) will be
repaired or replaced with new or reconditioned product (at the Company’s
option) without charge for parts and repair labor. To obtain repair or
replacement within the terms of the warranty, the product is to be delivered
with proof of warranty coverage (e.g. dated bill of sale), specification of
defect(s), transportation prepaid, to an approved warranty station. For the
location of the nearest warranty station to you, call toll-free to our control
office: 1-800-645-4994.
This Warranty is not transferable and does not cover product purchased,
serviced or used outside the United States or Canada. This Warranty does not
extend to the elimination of externally generated static or noise, to
correction of antenna problems, loss/interruptions of broadcast or internet
service, to costs incurred for installation, removal or reinstallation of
product, to corruptions caused by computer viruses, spyware or other malware,
to loss of media, files, data or content, or to damage to tapes, discs,
removable memory devices or cards, speakers, accessories, computers, computer
peripherals, other media players, home networks or vehicle electrical systems.
This Warranty does not apply to any product or part thereof which, in the
opinion of the Company, has suffered or been damaged through alteration,
improper installation, mishandling, misuse, neglect, accident, or by removal
or defacement of the factory serial number/bar code label(s).
THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY’S LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT. This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO DURATION OF THIS WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY HEREUNDER, INCLUDING ANY IMPLIED WARRANTY, MUST BE BROUGHT WITHIN A PERIOD OF 24 MONTHS FROM THE DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES WHATSOEVER. No person or representative is authorized to assume for the Company any liability other than expressed herein in connection with the sale of this product. Some states/provinces do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damage so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights and you may also have other rights which vary from state/province to state/province.
IMPORTANT SAFETY INSTRUCTIONS
for RCA WHP145
PLEASE READ AND SAVE THIS FOR FUTURE REFERENCE
Some of the following information may not apply to your particular product; however, as with any electronic product, precautions should be observed during handling and use.
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with dry cloth.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
ADDITIONAL SAFETY INFORMATION
- Do not use unauthorized chargers or power adapters. Use only chargers that came with your product or that is listed in the user’s guide.
- Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
- Do not attempt to disassemble the cabinet. This product does not contain customer serviceable components.
Precautions for the unit
- Do not use the unit immediately after transportation from a cold place to a warm place; condensation problems may result.
- Do not store the unit near fire, places with high temperature or in direct sunlight. Exposure to direct sunlight or extreme heat (such as inside a parked car) may cause damage or malfunction.
- Clean the unit with a soft cloth or a damp chamois leather. Never use solvents.
- The unit must only be opened by qualified personnel.
Headset safety
To use a headset safely, please keep the following in mind:
- Do not play your headset at a high volume. Hearing experts advise against continuous extended play.
- If you experience ringing in your ears, turn down the volume or stop using the headset.
- Do not use a headset while driving a motorized vehicle or riding a bike. It may cause a traffic hazard and is illegal in many areas.
- Even if your headset is an open-air type designed to let you hear outside sounds, don’t turn up the volume so high that can’t hear sounds around you.
- Never operate heavy machinery while listening to or wearing your headphones
Warning
Except in case of emergency, VOXX Accessories Corporation recommends you do
not use these headphones or headsets (headphones plus microphone) as aviation
communication equipment as they are not engineered for many environmental
conditions common in commercial or non-commercial aircraft (including, but not
limited to: altitude, temperature, noise conditions, unpressurized aircraft,
ect) resulting in possible interference to critical communications.
Listen Responsibly
To avoid hearing damage, make sure that the volume on your music player is
turned down before connecting your headphones. After placing headphones in/on
your ears, gradually turn up the volume until you reach a comfortable
listening level. Noise levels are measured in decibels (dB), exposure to any
noise at or above 85 dB can cause gradual hearing loss. Monitor your use;
hearing loss is a function of loudness versus time. The louder it is, the less
time you can be exposed to it. The softer it is, the more time you can listen
to it.
FCC/Industry of Canada Information
Note: This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by VOXX Accessories Corporation could void the user’s authority to operate the equipment.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
IC Radiation Exposure Statement: This equipment complies with Canada radiation exposure limits set forth for uncontrolled environments. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Industry Canada Regulatory Information CAN ICES-3 (B)/NMB-3 (B)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>