Shenzhen Tuye Technology MICROPHONE1 Lavalier Mic 2.4G Mini Wireless Microphone User Manual

Shenzhen Tuye Technology MICROPHONE1 Lavalier Mic 2.4G Mini Wireless Microphone User Manual

Operation Steps

Step 1: Insert the Receiver into mobile phone, and you can see the red light flashes slowly from its side.
Step 2: Long press POWER button on the Mic, the LED light flashes white color slowly, indicating that Mic has been turned on normally.
Step 3: No operation is required after Step 2, and it will pair automatically. After the pairing is successful, the white light of the microphone is always on. The red light on the receiving end is always on.
(Note: It will automatically pair after power on, without any operation, and it can be used normally after pairing.)
Step 4: Open voice recorder or voice memo on your mobile Phone

Function

1. Type‐C or Lightning port optional, easy to insert and quick charging & reverse charging.
2. During charging, mobile phone’s normal functions are workable, for example, live streaming, recording, etc..
3. Supports recording, playback, and hands‐free live playback of call son Android phones and iPhones systems.
4. It supports high‐definition recording noise reduction, with ENC call noise reduction at least up to 3 decibels, smart noise reduction and no current sound.
5. It supports dual‐transmit & receiving distance of at least 30 meters (including back‐to‐back test) and automatic re‐connection after disconnection.
6. Directly turn ON by inserting it to mobile phone or turn OFF by taking out from mobile phone, to avoid situations that device be shut down by button or the device crashes.

Troubleshoot

1. For some Android phones, you may need to manually open OTG function.

2. If one side of Receiver is not easy to insert into the mobile phone, please turn the it over and try another side.

3. If Mic and Receiver cannot pair, please quickly double
   press POWER button on Mic to clear pair list, at the same
   time LED light will quickly flashes white color.

4. Mic

5. LED

6. Lavalier

7. ON/OFF

8. Lanyard hole

9. LED

10. Type‐c

11. DC‐IN

12. Lanyard hole

13. LED

14. Lightning

15. DC‐IN

FCC Warning

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful  interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.
   The device has been evaluated to meet general RF exposure requirement.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>