Shenzhen I Link Technology BT4871 30-PIN Bluetooth Audio Receiver User Manual
- June 6, 2024
- Shenzhen I Link Technology
Table of Contents
Shenzhen I Link Technology BT4871 30-PIN Bluetooth Audio Receiver User
Manual
Product Overview
Specifications
Bluetooth Version : Bluetooth V4.1 Frequency Range : 2.4GHz-2.480GHz Operation : CLASS2 Bluetooth distance : up to 33 feet Bluetooth protocol : HFP1.6 HSP1.1 A2DP1.2 AVRCP1.5 SPP1.0 External supply voltage : DC+5—DC+16V ( 30 pin Apple speaker power ) External power supply operating current : 36mA
Bluetooth Mode
Power on : Plug the receiver into the Apple 30 PIN dock speaker, switch to the “ON” position, the receiver will turn on automatically.
Power off : Pull the receiver out of the Apple Audio 30 PIN or switch to the “OFF” position, the receiver will turn off.
Use Instruction
- Turn on the dock speaker, Plug the receiver into it, The speaker will turn to “IPod mode” automatically. (If the speakers could not turn themselves automatically, You can change to “IPod mode” by mode key)
- Pair the receiver’s Bluetooth with phone’s Bluetooth.
- When the pairing is successful, You can use the Dock speaker to listen music.
- If the Dock speaker have button, You can use it to control playing music.
Pair to your phone
- Before using the receiver for the first time, you must pair it with your phone.
- Power on the receiver, the blue indicator will flicker quickly and into the pair mode automatically.
- Turn on the Bluetooth function of your phone, search for the Bluetooth devices and select “Soul 2”
- Enter the code “0000” if needed.
- If pairing is successful, the blue indicator will be on all the time.
Connect Two Phone
- When “A” phone connection is successful, turn on the “B” phone’s Bluetooth and pair with the receiver.
- When “B” phone connection is successful, The two phone will connect with the receiver at the same time.
Note: lf the connection is successful, the next time the receiver is turned on will automatically connect to the last connected mobile phone Bluetooth (please confirm the Bluetooth function of the phone is “ON” before the receiver is turned on).
Indicator status description
Power on status : blue light flashes
Standby status : indicator is off
Paired connection status : blue indicator flashes
Pairing success status : blue indicator light is always on
Service Team: support@smofdirect.com 3 F, Unit B, Zone C, Yongqi Technology Center Baoan District, ShenZhen, Guangdong, 518000 CN
FCC Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.
Radiation Exposure Statement
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance of 20cm from your body.