Shenzhen I Link Technology WP15 Smart Wireless Charging Car Holder User Manual
- June 5, 2024
- Shenzhen I Link Technology
Table of Contents
I Link Technology WP15 Smart Wireless Charging Car, Holder
**User Manual
**
Smart Wireless Charging Car Holder
Model: WP15
Thank you for using this product, please read the instructions carefully before using it!
Product Parameter
Material: ABS+PC
Input: 5V/2A, 9V/2A, 12V/1.5A
Output: 5W / 7.5W 110W / 15W (MAX)
Input port: Type C
Applicable size: 4.5-6.7 inch mobile phone
Applicable place: Air outlet/ Dashboard/ Windshield
Product Features
- A smart wireless charging stand that automatically detects the alignment of the wireless charging coil. It can automatically and accurately detect the position of the wireless charging receiving coil of different mobile phones, and the test charging speed is more stable and faster, which can be increased by 30%. Besides, automatically memorize the location of the phone and charges it the second time.
- With its own supercapacitor, safer and more secure to charge the phone even if the car is turned off.
- An electromagnetic induction allows your mobile phone to be placed and taken at any time, easily use the smart wireless charging stand.
- An electric stand with a clamping force of 5 kg, high speed, and a firmly stable electric stand.
- High-quality silicone easily protects your phone from harm.
- 15W fast charging makes you feel the fun of fast charging.
- The new air outlet fixing clip makes your bracket never sag and is more stable.
Indicator Status
| Power on state | Blue light always on |
|---|---|
| Charging | Indicator lights slowly |
| Charging completed | Static light |
| Foreign Object Detection | Blue lights flashing |
Interface Description
Installation Steps
Install the air vent clip as pictured.
Open the clip and insert the air vent blade, adjust the angle of the mobile phone and the support rod, and then tighten the knob to complete the installation.
- Connect the suction cup base to the product, insert the universal ball into the nut first, then insert it into the bolt on the back of the product and tighten the nut clockwise.
- Place the base on the dashboard or windshield, and press the vacuum switch to fix it. 0 Open the retractable arm, stretch and adjust the support arm.
- Loosen the knob of the suction cup base counterclockwise, the support rod can be rotated at multiple angles to adjust the viewing angle.
Phone Charging
-
Use the Type-C cable in the package to connect the holder to the car charger, and the left and right clamping arms will automatically open.
-
Put the mobile phone on the wireless charging stand, the base will automatically adjust to align the mobile phone with the charging coil, and then the clamp arm will automatically clamp.
-
Press the switch button on one side, and the clamp arm will automatically open, and the phone can be taken out at this time.
Warning
- Do not disassemble and modify the product by yourself.
- Do not put this product in a humid environment.
- Do not place this product near a heat source
- Do not allow water or other liquids to flow into the product, otherwise, it may damage the product
- Do not install the wireless charger on the airbag cover or airbag deployment area.
- Before charging, remove the metal or magnetic protective cover or card (such as a bank card) from the device.
- Usually heat up when charging, but it will not affect the performance of this product. If you think the product or phone is overheated, please cool down the product or phone first, or cut off the power and recharge it later.
- Please avoid using a bent or damaged USB power cord.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Requirement
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment. This
device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy, and if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.