TECNOCK QY1801A Speed Racing Super High Speed Car Instruction Manual

TECNOCK QY1801A Speed Racing Super High Speed Car

How to bind

1. Turn on the vehicle first.then turn on the transmitter.
2. Keep pulling the trigger of the transmitter to match the vehicle.
3. When the vehicle is functioning, that means they are matched.
4. lf it doesn’t complete the binding process within 8 seconds, please turn off both the vehicle and transmitter and re-start the binding process.
5. When the binding process is complete,whenever you switch the vehicle and transmitter on and off, it searches for the memorised code and will only lock onto the transmitter signal containing that code.
6. lf you have more than two vehicles,please bind them one by one.When the second vehicle is binding.always keep the first vehicle and transmitter on.
7. Please turn off both the vehicle and transmitter and re-start the binding process if you are changing to another 2.4GHZ transmitter.

How to play

1. Switch ON the vehicle and transmitter.
   

2. Use the steering wheel to control the vehicle turning left or right.
   

3. Use the accelerator trigger to drive the vehicle forwards, stop, or backwards.
   

4. Play on a smooth surface for optimum performance.

5. Remember to switch OFF the power of the Vehicle and Transmitter after playing.

6. The optimum control range is up to 30 metres outdoors.

Disposal of batteries

Batteries should not be disposed of in the !household waste. As the consumer you are legally obliged to return batteries containing harmful substances and all other used batteries. You can hand in your old batteries at public collection points in your area or wherever batteries are sold. You will find these chemical abbreviations along with a crossed-out refuse bin on batteries containing harmful substances:
Pb=Battery contains lead
Cd=Battery contains cadmium
Hg=Battery contains mercury

Battery Installation

For below items

Battery included (For NI-CD or NI-MH Battery)

Contents

• RC Vehicle x 1
• RC Transmitter x 1
• Instruction Manual x 1
• 3.6V rechargeable Battery Pack x 1
• USB Charger cable x 1

Charging time: 3.5-4.5 Hous
Playing time: 20-30 minutes

Turn off the switch of the car when charging. The red light is flickering, means charging now. The light is off, means the battery is full.

SAFETY PRECAUTIONS

• Do not mix old and new batteries.
• Do not mix alkaline, standard(carbon-zinc), or rechargeable (nickel- cadmium)batteries.
• Insert batteries using the correct polarity. Do not short-circuit the supply terminal.
• Remove batteries when not in use. Recycle or dispose of exhausted batteries according to federal, state . And local laws.
• Do not dispose of batteries in afire-they may leak or explode.
• Only use manufacture specified battery(ies), charger(s) and/or adapter, if applicable, specified by the manufacturer.
• Always use, replace, and recharge{if applicable)batteries under adult supervision.
• Non-rechargeable batteries are not to be recharged:
• Rechargeable batteries are to be removed from the for before being charged;
• Rechargeable batteries are only lo be charged under adult supervision;
• Exhausted batteries are to be removed from the toy;
• The supply terminals are not to be short-circuited.
• Packaging has lo be kept since it contains important information.
• Product may vary slightly from image shown
• Performance Tips : Do not drive the vehicle on grass, sand rocks or go through water.
• Do not drive the vehicle into any hard object.

Cautions

1. Do not drive on grass, dirt, sand, dusts, carpet or through water

2. Do not drive in windy or rainy weather

3. Avoid the vehicle directly impacting with obstacles

4. Switch OFF the power when not in use lo prevent damage to the vehicle or transmitter due to leakage of electrolytes from batterief

5. Remove all batteries from the vehicle and transmitter when not in use for a long period of time.

6. Keep fingers, hair and loose clothing away from the wheels

7. The operating range can be affected by a variety of factors:
   a) Low Voltage of batteries in the transmitter or vehicle
   b) Interference from other items that emit radio frequency signals

8. Outdoor usage is recommended in order to get optimum control range

9. It is recommended to play with the vehicle on a clean and smooth surface

10. Clean the battery compartment to make sure it is free from dust to prevent poor contact of batteries

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particu lar installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>