WiLINQ D010U LTE Wireless Router User Manual

D010U LTE Wireless Router
User Manual

Thank you for choosing WiLINQ D010U 4G wireless router. Please read the user manual carefully.

Product Diagram

Product Interface

Indicator

Picture guide for installation of external antenna, LAN, adaptor, and PC.

• Turn off the router and unplug the power adapter before installing any external panel antenna.
• Do not use an external antenna during thunderstorms.
• Only use external antennas provided by your carrier.

Quick Configuration Guide

The router supports a standard RJ45 cable or WLAN wireless to connect to a computer. Supports Windows XP/Windows 7/Windows 8/Window 10/MAC OS/Linux/Android.
A. Insert the SIM Card according to the given instructions.
B. Connect the LAN cable to the LAN port and check to match the power adapter label and device sticker before plugging into the power outlet.
C. Set your computer network to obtain an IP address automatically.
Once the computer gets the 1P address, open your web browser and type the default gateway IP address “192.168.0.1.”
D. Click “Login” in the upper right corner to access the user page using the username and password indicated on the device sticker at the bottom of the device.

E. Wi-Fi configuration
Wi-Fi is enabled by default, and the default Wi-Fi name and password are provided on the device sticker label.
If you need to modify them, log in first to the device website.
Click Device Settings > Wi-Fi-2.4GHz settings or Wi-Fi-5GHz settings and then follow the instruction to set your own Wi-Fi password.

 Package Contents

1. 1 x D010U Router
2. WLAN ON/OFF Switch
3. 1 x LAN Port Cable (RJ45)
4. 1 x D010U User Manual
5. 2 x External Antenna

Precautions

1. When you remove and insert the SIM card, please ensure the device is powered off.
2. Do not use the equipment during thunderstorms and unplug the external antenna and power adapter.
3. If the device is working fine, do not change the parameter or other functions. If changed and you cannot access the Internet, please try to reboot. Press and hold the reset button for more than 5 seconds to restore the factory settings.

Common faults and treatment methods

power adapter if it’s properly plugged in the power outlet and the device power port. Check the cable for
any damage.
Computer local connection is not displayed. Cannot successfully PING IP address of the device. Cannot open the WEB page.| Check the computer’s LAN network status. See if it automatically obtains the IP address from the device DHCP pool. Reboot your
computer and your modem. Clear your browsing history / CACHE. Check your LAN cable if properly plugged in the LAN port.
The device is working but cannot access the Internet through the web| Set the computer to automatically obtain the IP address and DNS server address.
Change user page login password or SSID password but forgot the password.| Hold and press the reset button for more than 5 seconds to restore the
factory settings. Check the username and password in the back label information.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with provided instructions. The antenna(s) used for this transmitter must be installed with a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and consider removing the no-collocation statement.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Caution!
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Canadian Statement
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1. this device may not cause interference.
2. this device must accept any interference, including interference that may cause undesired operation of the device.

The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems

1. the device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to cochannel mobile satellite
   systems;

2. for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 54705725 MHz shall be such
   that the equipment still complies with the e.i.r.p. limit;

3. for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate.

Contact
info@acentury.ca

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>